PERIODICAL SERVICES OF HANGERS, OTM BLDGS INCLUDING JOINERY AND CONNECTED ITEMS AT TECH AREA UNDER GE AF STN GORAKHPUR

Amount

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with subclass 'B' brick straight or curved on plan 6m mean radious built in CM (1:4) etc complete all as specified and directed.

Taking down cement or cement lime plaster any description incl racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, chajja, fins facia etc upto 3 storie height mixed with water proofing compound (ISI marked) @ 3% by weight of cement or as per manufacturer’s instructions, finished the surface fair and even (without using extra cement), complete all as specified. Note 1: - Supply only water proofing compound shall be measured and paid for separately.

Supply only integral water proofing compound (ISI marked). complete all as specified and directed.

M & L for rendering 15 mm thick in cemnet mortor 1:6 on fiar faces of brick work or concrete surfaces & finish the surface fair and even (without using extra cement), complete all as specified.

M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling,finished even & smooth without using extra cement complete all as specified.

M& L prepaation of new plastered surface of wall and applying two coat of cement base paint over a coat ofalkali resistant primer primer and 2 mm tick wall care putty complete all as specified and directed

M & L for Preparing new plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over & over a coat of alkali priming coat and 2 mm thick wall care putty, complete all specified and directed

M & L for preparation of new plastered surfaces of ceiling and applying two coat of white wash complete all as specified and directed.

Taking down chawkhats or frame with shutter (without taking out shutter from the frame n.exc 1.50 Sqm each and removing from site complete all as specified and directed.

All as per Item No. above but exc 1.50 Sqm and n.exc 4 sqm each. complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed.

S&F 2nd class hard wood (sal) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete as directed.

M&L for IInd class hard wood glazed and skeleton shutters 30mm thick, factory made open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and as directed.

S&F 30mm thick flush shutter, factory made, solid core construction with particle board care and plywood face panels commercial type on both side complete all as specified and as directed.

S&F Factory made solid PVC Chowkhat /Door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm thick rigid PVC foam sheet coloured, reinforced with 19x19mm MS square tube of 19 gauge including rubber gasket, PVC fasteners, screws, brackets as per SSR Part –II (2010) complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing as mentioned in SSR-2020.

S & F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, locks, strike plate etc complete and the size of frame is 125 x 60 mm. complete all as specified and directed.

S & F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, locks, strike plate etc complete and the size of frame is 105 x 60 mm. complete all as specified and directed.

S & F steel windows with side hung shutters (single frame with double shutter)inside gauzed and outside glazed including projection type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded.

S & F steel ventilator with top hung shutters including hinges steel peg stay, guard bars 10mm sqare, MS bars welded @ 175 C/C horizontally etc complete all as directed.

S&F 100mm size mild steel butt hinges, medium weight cold rolled complete all as directed.

S&F extruded aluminium anodized pressed handle, fabricated type of size 150mm, complete all as specified.

S&F 150 mm long Aluminium anodized barrel tower bolt, complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood or wood based materials of any description, not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S&F in repair 1st class Hard Wood Beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc. complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or escription) from wooden/metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

S&F 3mm thick sheet glass ordinary quality and galzing with oil putty in square n. exc 0.5 sqm in each pane complete all as specified and directed.

M&L for 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all specified and as directed.

M&L in repairs powder coated aluminium doors (sliding/hanging type) with frame size 101.60X44.45X 2.00 mm thick and shutter aluminium anodised and top rail 47.62X 44.45 X 1.50mm and style 47.5 x 44.5 x1.5 mm , lock rail 83.50X 44.45 X 1.50 mm and bottom rail150.00X 44.50 X 2.50 mm and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.4mm incl necessary aluminium fittings like aluminium butt hinges 04 Nos , aluminium handles 150mm 02 Nos, aluminium tower bolts 200mm 01No, mortice lock 4 lever MS, hydraulic door closer of suitable capacity 01 No, aluminium door stopper 01 Nos, jointing cleats, glazing cleats, rubber packing , anodised aluminium shape beading, screws etc with paneling in two parts with 12mm thick prelaminated particle board in lower panel and 5mm thick tinted glass in upper panels incl all fittings& fixture complete all as specified and directed.

M&L in repairs powder coated aluminium (sliding/ hanging type) windows/ventilator with frame size 60x40x2.00mm thick and shutter with section bearing bottom 25x18x1.50, top 39.4x17.7 X1.50 mm ( suitable for moving over three track fixed over top of frame work , top and side section of size 61.6 x 31.75x1.5mm and bearing bottom track of size 61.6x 31.75x1.5mm or fixing with hinges steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.4 mm including necessary aluminium jointing cleats, glazing cleats, rubber packing anodised shape beading, screws etc with 4 mm thick tinted/ plain glass in panels incl anodised aluminium grill with all fittings & fixture complete all as specified and directed .

S&F in repair anodised aluminium alloy Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete al as specified and directed.

S&F in repair mortice lock of mild steel vertical type of size 150mm with 6 levers fixed to wooden/ aluminum doors complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repair door closer hydraulically regulated, aluminium (extruded section body )designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60kg complete all as specified and directed.

S&F in repair 5.5mm thick, sheet/ tinted glass, ordinary quality to be fixed with aluminium beading and rubber gas kit in aluminium frame work as in door/ window/ partition etc all as specified and directed.

M&L for 4mm thick both side aluminium decorative sheet laminated partition panel for fixing in aluminium door shutters by taking out old ply/board from exsting aluminium door shutters complete all as specified and directed

S& F in repair aluminum glazing clips / beading for aluminum door and window complete all as specified and directed.

S& F in repair rubber gasket for packing / beading for aluminum door and window complete all as specified and directed.

M&L in repairs anodised aluminium grill Wt nexc 3.50 kg per sqm with all fittings& fixture, shape and size as approved complete all as spesified and directed .

S&F in repair prelaminated particle board, 18/19 mm exterior grade, prelaminated two side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F 15 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors or concealed including taking up or down steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F 20 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors or concealed including taking up or down steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F in repairs bib taps 15 mm bore brass, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15 mm dia brass angle cock fancy type, with capstan head chromium plated screwed down high pressure with or without lettered with long screwed shank and fly nut screwed complete all as specified and directed.

S&F in repairs brass chromium plated two way angle cock, of 15 mm bore complete all as specified and directed.

S&F in repair Concealed stop cock (fancy type),15 mm bore, chromium plated ,with long shank and cup, complete all as directed .

S&F in repair stop valves 15 mm fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs chromium plated shower roses with or without swivel joints, any size incl fixing to steel pipe or union complete all as specified and as directed.

S&F in repairs 15mm bore pillar tap fancy type cast copper alloy chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screw shanks screwed for iron pipe or union complete all as specified and as directed.

S&F in repairs 15mm bore pillar tap fancy type cast copper alloy chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screw shanks screwed for iron pipe or union complete all as specified and as directed.

S&F in repairs 15mm bore dia Brass CP central hole mixer for mixing hot & cold water screwed down with PVC & CP connection on WHB complete all as specified and directed by Engineer-in-Charge.

S&F in repairs gun-metal 20 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair 32/40 mm spring type PVC waste pipe fixed to WHB & Sink etc complete all as specified and directed ( Note minimum length of each pipe should more than 0.70RM) complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern, with EWC including p or s trap ,seat cover , including connection to trap /drain and to flushing pipe anti syphonage pipe etc complete including making good floorcomplete all as specified as directed.

S&F in repair vitreous china squating pan orissa pattern size 580X 440mm white with intregal foot rest complete including lime concrete(excl flushing cistern and flush pipe) but connecting to flushing pipe, anti-symphonage pipe etc complete fixed in repair complete all as specified as directed.

S&F in repairs Vitreous china WHB, white, flat back, of size 550 x 400 mm including brackets, waste coupling 32mm, and waste Pipe, 32mm complete all as specified and directed.

S&F in repair vitreous china Urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) with urinal spreder complete all as specified and as directed by Engineer in Charge.

S&F in repair CP bottle trap for WHB having minimum water seal 32 mm complete all as specified and as directed.

S&F in repair PVC valveless, syphonic action type flushing cistern complete with syphon handle lever float valve and PVC bend incl connecting to ITWC/ETWC and fixing on walls with brackets complete all as specified and as directed by Engineer in Charge.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair SS jet spray for water closet with suitable SS flexible pipe of 15 mm bore complete all as specified and directed by Engineer-in-Charge.

S&F 500 ltr capacity triple layer, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with 20mm bore high desity plastic ball brass valves, high pressure of PTMT with epoxy coated aluminium rod screwed for iron pipe and fixed including dismantling water tanks of capacity exceeding 250 litres but not exceeding 500 litres all as specified and directed.

S&F 1000 ltr capacity triple layer, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with 20mm bore high desity plastic ball brass valves, high pressure of PTMT with epoxy coated aluminium rod screwed for iron pipe and fixed including dismantling water tanks of capacity exceeding 500 litres but not exceeding 1000 litres all as specified and directed.

M&L for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of exc. 250 liters & n.exc. 500 liters capacity of tanks with bleaching powder @ 0.25 Kg per tank complete all as specified and directed.

All as per item No. above but exc. 500 liters & n.exc. 1000 liters capacity with bleaching powder @ 0.25 Kg per tank. complete all as specified and directed.

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed of 15mm bore (Minimum weight 142 gms.) complete all as specified and directed.

All as per item No. above but of 20mm bore (Minimum weight 210 gms.) complete all as specified and directed.

Taking down of rain water pipes, of any dia and pattern complete all as specified and directed.

S&F 110mm dia PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed.

All as per item No. above but of 75mm dia complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and directed.

All as per item No. above but of 75mm dia complete all as specified and directed.

S&F stack clamps made out from 50 x5mm size flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110 mm bore of pipe etc complete all as specified and directed.

S&F in repairs PTMT grating 125mm dia complete all as specified and directed.

S&F in repair PVC tank cover for 500 ltrs water tank complete all as specified and directed.

ditto, as per Item No above but 1000 Ltr capacity each complete all as specified and directed.

S&F repair plastic water closet seat cover for pedestal or semi pedestal pattern, white/black closed pattern with flat botom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer in Charge.

S&F in repair PVC coloured bath cabinet overall size 500x410mm decorative design with looking mirror all as specified. Make:- Marrigold/Commander/Prayag

M & L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) including dismantling floor, hearth or wall tiling including dismantling of tiles, complete all as specified and directed.

M & L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) including dismantling floor, hearth or wall tiling including dismantling of tiles, complete all as specified and directed.

M&L for Glazed ceramic coloured tiles 350x 250x 7mm/ 450X 350X 7mm thick, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over 10mm thick cement plaster in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles includingdismantling of tiles, complete all as specified and directed.

M&L for doublecharged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 including dismantling of tiles, complete all as specified and directed.

S&F mild steel flat iron as in hold fast including screwing or welding all as specified.

M&L provding cement concrete 1:3:6 using 20mm graded stone agg as in hold fast complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for Joist, channel, angle, or tee sections, Fe 410 -W (Gde E- 250) quality A fixed independently, with or without connecting plates, etc complete all as specified and directed.

M&L for hot rolled steel flat Framed work of water tanks mesh welded and similar work conforming Fe 410 -W (Gde E- 250) quality A omplete all as specified and directed.

S&F 4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as spcified and directed.

S&F mild steel framed work such as grills, gratings, fillets etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars etc conforming to Fe 290, grade E-165 complete all as directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm/600mm complete all as specified and as directed by Engineer in Charge.

M&L Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing’s or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed.

Dismantling existing aluminium grid frame work used as in bird proofing of hanger complete all as specified and directed.

S&F anodised aluminium snap grid frame as in false ceiling/ Bird proofing of hanger complete all as specified and directed by EIC (grid size 605X605 mm ) complete all as specified and directed..

S/F in repair wire netting of galvanised steel wire 0.91mm dia and size of mesh size 20mm in false ceiling fixed to aluminium frame complete all as specified and directed..

S/F in repair PVC Bird proofing net in doors of hangers ,Bird proof Net to be stitch with Nylon thread with overlap of cotten cloth at joints of net complete all as spefied andd directed.

S/F in repair 160mm dia PVC (SWR) Rain Water pipes with rubber rings joints with solvent cement single socketed fixed to wall cladding inside hanger ceiling duct at any height laid on roof with 2mm thick GI bracket fabricated type complete all as specified and directed..

S&F in repairs plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters Gutter and rain spouts : 0.5m width valley made out of curved 2mm thick GI sheet for full length of shelter including necessary down pipes of UPVC of dia 160mm, drip and straight flashings (length and girth as fixed) with grading of zink coating 275,1 mm thick and making special shape to connect rain water fixed with self tapping screws at any height exc.10 mts and n exc 20 mtrs including dismanling of existing sheet complete all as specified.

Dismantling of false ceiling board ,fiber insulation board any thickness including wooden cover fillets aluminium frame work as directed .

S&F anodised aluminium snap grid ( size 605mm x 605mm) frame work for false ceiling with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and fixing 4mm thick non asbestos fibre cement building boards fixed or laid/inserted to aluminium framed work complete all as specified and directed.

Supply, spreading and levelling of sand and saw dust in equal proporation (1:1), for alignment of firing range levelling with required gradient, mixing of sand+saw dust etc. complete all as specified and directed.

Repair/ servecing / easing of rolling shutter of any size and description including greasing, Servicing of existing bush bearings mounted, hood cover repair and adjustment, rollers by claening, greasing, locking hooks, repair to spring and rod etc. including all necessary arrangements of suppots/ shoring etc. complete all as specified and directed.

Repair/ servecing / easing of hanger steel gate shutter (exc 7.00 m width and 8.25 m hieght) sliding/ rolling over wheels (minimum 06 Nos) on track at floor and rolling over rollers (minimum 08 nos) between framed MS track at top with following specifictions :- (i) Servicing of existing bush bearings mounted at both sides of each wheels and top rollers by claening, greasing etc. including all necessary arrangements of suppots/ shoring etc. for taking out wheels and rollers complete all as specified and directed. (ii) Cleaning, greasing and strengthening of tracks fixed over floor and realignment of track if required. (iii) Welding of guide bracket and other strutural steel member of gate as required. (iv) Realigning and refixing of wheels and rollers with cleanin and greasing etc.

Repair/ servecing / easing of existing rolling shutters of any size, including cleaning and greasing of bearings, repairs of springs, locking device, adjustment and re-fitment of small articles such as flat iron, ISA repair replacement of hood cover etc including all necessary arrangements etc. complete

Supply only MS wheels,pintel,axies of required size and parts required for pully s for aircraft hangers doors and roller gates with bearing and all as specified and directed (Labours are included in items).

M&L MS framed work as in hanger door/roof and track, complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floor,wall, aprons etc complete all as specified and directed.

M&L in Machine cut mirror Plolished kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 20mm thick screed bed in CM (1:6) complete

Dismantling of Plain or corrugated steel/fibre sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Demolition of cement concrete un- reinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L 75mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified.

M&L for screed bed or beding layer of mortar 20mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L Chequered cement concrete tiles with grey cement & pigment 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors all as specified and directed.

M&L 100mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified.

M&L for sand cushioning layer under the floors and hand level surface including watering and consolidation to receive floor tiles.

M&L for Machine pressed precast concrete interlocking paver block vibro compacted rubber moulded with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and directed by Engr-in-Charge.

M&L 100mm thick PCC 1:2:4 type B-1, using 20mm graded stone aggregate as in hard standing finished even and smooth without using extra cement including spike rolling to surface or making impression of expanded metal whilst the concrete is green.

M&L for 75mm thick cement concrete type C2 1:3:6 using 40 mm graded stone aggregate as in plinth protection including finishing cement concrete surfaces even and smooth without using extra cement.

M&L for one coat of exterior emulsion paint over old decorated surface of wall including preparation of surface complete all as specified and as directied. Note:- Cost of scaffolding and its removal is deemed to be included in unit rate quoted.

M&L Complete removal of existing treatment by scrapping, washing, rubbing down & stopping etc of old painted surfaces and applying two coats of exterior emulsion paint on walls complete all as specified and as directed. Note:- Cost of scaffolding and its removal is deemed to be included in unit rate quoted.

M&L for Preperation of old painted surfaces of wall by scrapping, washing, rubbing down & stopping etc of old painted surfaces and applying one coat of exterior emulsion paint in camouflage pattern (two or more colour combination) . Note:- Cost of scaffolding and its removal is deemed to be included in unit rate quoted.

M&L for Complete removal of existing treatment by scrapping, washing, rubbing down & stopping etc of old painted surfaces and applying two coat of exterior emulsion paint camoflague pattern complete all as specified and directed. Note:- Cost of scaffolding and its removal is deemed to be included in unit rate quoted.

M&L for preparation of old painted wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old painted steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old painted steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint in camouflage pattern complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old plastered surfaces of wall and priming plastered and other surfaces with alkali resistance primer and applying one coat of oil bound distemper to achive smooth surface complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and priming plastered and other surfaces with alkali resistance primer and applying two coat of oil bound distemper to achive smooth surface complete all as specified and directed.

M&L for providing and applying minimum 3mm thick wall care putty over prepared surface to achive the surface even and smooth for painting.

M&L for preparation of new plaster surfaces of wall and applying two coats of distemper oil emultion over a coat alkali resistant primer by using mechanised euipments complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new plaster surfaces of wall and applying two coats of cement base paint over a coat alkali resistant primer by using mechanised euipments complete all as specified and as directed by Engr-in-Charge. Note:- Cost of scaffolding and its removal is deemed to be included in unit rate quoted.

M&L for preparing newly plastered surfaces of wall and applying two coat of exterior emulsion paint camouflage pattern over one coat of primer and 2mm wall care putty by using mechanised euipments as smart periodicals complete all as specified and as directed by Engr-in-Charge.

M/s Pandey Trading Company (BID ID -3319726)

M/s B. P. Construction (BID ID -3314954)

H AND Y GROUP (BID ID -3328314)

M/S EASTERN TECHNOCRAFTS (BID ID -3320073)

sanjay enterprises (BID ID -3319372)