Speial repair to DG Sets and connected electrical works electric Chimneys at all messes at 2 AFSB Mysore

Amount

Dismentlling of alternator from engine of 100 KVA DG set Transportation to workshop, Rewinding with suitable size of copper conductor and Refixing at same location and Testing complete

Supply and Fix Contactor coil LXI FF, 240 volts for AMF Panel

Supply and Fix of AVR for DG Set 100 KVA/ 62.5 KVA/ 82.5 KVA

Dismentling of old unserviceable radiator assembly and Supply, Fix and testing of radiator assembly for 30 KVA DG Set

Dismentling of old unserviceable radiator assembly and Supply, Fix and testing of radiator assembly for 82.5 KVA DG Set

Disconnecting of old unserviceable 12 Pin terminal block for battery charger and connect new 12 pin terminal block.

Taking out old unserviceable Contactors, Connectors, Relays and fixing new Contactors, connectors and relays in AMF Panel for 20 KVA DG set at PH

Supply and Fix in repair Change Over on load Change over switch 250 Amps, Four pole

Supply and Fix in repair Change Over on load Change over switch 160 Amps, Four pole

Supply and Fix in repair Change Over on load Change over switch 100 Amps, Four pole

Supply and Fix Relay for 100 KVA DG Set

Supply and Fix Contactor LC1F3304 for AMF Panel

Supply and connect battery charger

Supply and connect battery 100 Ah

Supply and connect battery 150 Ah

Supply and connect battery 88 Ah

Repair of Control panel and AMF Panel of DG Set

Excavation in trenches n.exc 1.5 Mtr wide and n.exc 1.5Mtr depth and getting out for errection of LT poles, stay assembly and laying of cable etc in hard/dense soil complete all as specified and directed by Engineer-in-Charge

M&L for laying of bricks well burnt sub class ‘B’ (old pattern) laid flat for cable protection width equal to the length of brick complete all as specified .

M&L for sand cushioning in trenches spreading and consolidation 8cm thick before laying the cable & 15 cm of sand after laying the cable complete all as specified

Removing of excavated material to a distance n.exc 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and directed by Engineer-in-Charge

Returning, filling in, including spreading, leveling watering and well ramming in layers n.exc 25 cms. thick in hard/dense soil complete all as specified and directed by Engineer-in-Charge

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 16 Sqmm, 2 core

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 16 Sqmm, 4 core

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 25 Sqmm, 4 core

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 150 Sqmm, 4 core

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 120 Sqmm, 3.5 core

Disconnecting of ACB 630 Amp and complete servicing including replacement of unserviceable components and refixing the same after repair and testing complete.

Supply and Fix MCCB 160 Amps, 415 Volts, FP

Supply and Fix MCCB 125 Amps, 415 Volts, FP

Supply and Fix MCCB 100 Amps, 415 Volts, FP

Supply and Fix MCCB 63 Amps, 415 Volts, FP

Dismentling Complete industrial Chimney from site including Duct, Filters and blower motor and exhaust system of Candidate Mess and refixing the same after cleaning and servicing

Cleaning suction system and change the filters304 grade

Rewinding of 3 Phase, 3 HP motor

Supply and fix of Motor starter of 3 HP motor

Dismentling Complete industrial Chimney from site including Duct, Filters and blower motor and exhaust system of Airmen Mess and SNCO's Mess and refixing the same after cleaning and servicing

Cleaning suction system and change the filters304 grade

Cleaning and rewinding of exhaust Fan

SRI AYYAPPA ENTERPRISES

SAPTHAGIRI CONSTRUCTIONS

eurekaenterprises