Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.9 LAccepted-AOC | L1 | Accepted-AOC AOC DUE TO L1 BIDDER | |
| 2 | L2₹52.4 L+₹2.5 L (5.03%)Rejected-Finance | L2 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 3 | L3₹54.1 L+₹4.3 L (8.57%)Rejected-Finance | L3 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 4 | L4₹55.7 L+₹5.9 L (11.7%)Rejected-Finance | L4 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 5 | L5₹57.1 L+₹7.2 L (14.5%)Rejected-Finance | L5 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE |
Tender Value
₹48.3 L
EMD Value
₹97,000
Closing Date
6 Sept 2024, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
MOHAN SINGH YADAV, IDSE
GE TENGA
PROVISION OF TILES WORK COVERING PARKING WITH HARD STANDING EXPENDABLE MED STORE AND PACKING MATERIAL STORE AT DIFFERENT POCKETS AREA OF AGE B/R AND AGE E/M UNDER GE TENGA
2024_MES_667894_1
8635/E8
Open Tender
Civil Works
Item Rate
180 days
TENGA VALLEY
PL REFER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹0
₹97,000
Yes
7 Oct 2024
25 Jul 2024
7 Sept 2024
25 Jul 2024
6 Sept 2024
8 Aug 2024
Amount
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level)
M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in sub floor finishing rough complete all as specfied and directed
M&L for 15 mm thick screed bed in CM 1:6 for laying floor tiles .
M&L for Dark shade vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sq in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.
Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard /dense soil
Material and Labour for Sand filling under floors or in foundations including watering and consolidation
M&L 150 mm thick, hard core of gauge n.exc 63mm, deposited, spread and levelled in layers nexc 15 cm thick, watered and rammed to a true surface.
M&L for 150 mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as Hard Standing in two layers.
M&L for Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm
M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'A'
M&L for Providing precast cement concrete solid building blocks type c1 1:3:6 (20 mm graded aggregate) or slabs 10cm thick (with plain or interlocking joints as directed) set in cement mortar 1:4
M&L 10 mm thick rendering in cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement
Excavating in post holes (or similar holes) each n exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface.
M&L for PCC 1:4:8 type D2(using 40mm graded aggregate)as in foundation filling and mass concrete etc.
S&F for MS angle iron/ hot rolled steel tubes, roof trusses (framed) trussed, purlins,rafters, plates, crane gantries rails and fastenings and heavy bracket framing (beam, tee, angle channel or flat sections), complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint over one coat of red oxide including preparing new zinc (or galvanised) surfaces to receive painting by coating with mordant solution including washing and cleaning etc on steel surfaces of any description , n exc 10cm in width or girth.
S&F for Pre-Painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour havimg testile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed.
S&F for Pre-Painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour havimg testile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed.
Surface dressing n.exc 15 cm deep and getting out in soft/loose soil.
Excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil.
Excavation in trenches n,exc 1.5 m wide and n.exc 1.5 m deep for foundation and getting out in hard/dense soil.
Ditto as above item No 21 but depth exc 1.50m but n.exc 1.50m
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.
Removing excavated material exc. 250m but n.exc 500m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and as directed.
M&L PCC 1:4:8 type D2(using 40mm graded aggregate)as in foundation filling and mass concrete etc.
M&L for MS TMT bars 10mm dia and over, cut to lenth, bend to shape required, including cranking, bending, sprially for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.
M&L for MS TMT bars 05 mm dia and over, upto and including 10 mm dia in stirrups, spaces and binders.
M&L for re-inforced cement concrete (nominal mix) 1:2:4 type B-1 (20mm graded aggregate) as in foundation, including rafts footing, foundation beams, plinth beams, bases for columns etc complete.
M&L for re-inforced cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in columns, pillars etc complete.
M&L for re-inforced cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in beams, plinth beams, cantilevers, bressummers, lintels over 1.5 m span etc complete.
M&L for RCC 1:2:4, as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete.
M&L for PCC 1:3:6 type C-1(20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete.
M&L for rendering 15 mm thick in CM 1:4 on concrete surfaces finished even and smooth without using extra cement .
M&L for rendering 15 mm in CM (1:6) over concrete wall surfaces finished even and smooth without using extra cement.
M&L for newly plastered surfaces of walls and applying two coats of cement based paint, over a coat of primer complete all as specified and directed.
M&L for Preparing new plastered surfaces of wall and applying Two coats of acrylic distemper/ distemper oil emulsion (OBD), over a coat of 1 mm thick wall care putty all as specified including preperation of surfaces
M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces.
M & L 75 mm thick plain cement concrete type C-1, 1:3:6 (40mm graded aggregate) as in sub base, including form work complete as as specified and directed by Engineer-in-Charge
M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in sub base of floorings.
M&L for 15 mm thick screed bed in CM 1:4 for laying floor tiles .
M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding .38 sqm, in vertical surfaces etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.
M & L for 50 mm thick II nd class Hard wood clean sawn boarding with butt joints fixed with nails in any situation.
S&F 4 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on ceiling surfaces.
M & L for 2 nd class Hard wood plain fillets, square, rectangular or triangular in section,wrought, secured with nails or brads, sectional area exc 3 but n.exc 6 sq.cm.
S & F GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc all as specified.
S&F PVC coated 25mm dia mild steel curtain rod of medium weight and fixing brackets, curtain ring @ 7 nos/Rm and decorative end supports etc complete all as directed”
M&L for 75 mm thick plain cement concrete type C-1, 1:3:6, (40mm graded stone aggregate)as in plinth protection, finishing the top surfaces even and smooth W/O using extra cement.
S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete
S&F 30mm flush shutters, solid core construction with particle board core and plywood face panels, commercial type on both side and both face is covered with decorative face veneer with lipping/frame tp match all as completed and specified as directed.
S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc
S&F for MS window guard bars, window frames etc articles confirming to Fe 410-0 or Fe 310-0.
S&F for sheet glass 3mm thick ordinary quality and glazing with oil putty in squares n exc 0.50 Sqm in each pane.(Make: Trivani/Modi Float/Gold Fish)
S & F 75mm size mild steel butt hinges medium weight cold rolled and fixed.
S& F Aluminium anodised barrel tower bolts 100mm long of extruded section and fixed
S & F 100mm size extruded aluminium alloy handles, fabricated type anodised
S & F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed
S&F 100mm size stainless steel butt hinges, medium weight, cold rolled complete with stainless steel screw etc. all as specified as directed.
S& F Aluminium anodised barrel tower bolts 150mm long of extruded section and fixed
S & F 150mm size extruded aluminium alloy handles, fabricated type anodised
M&L for mild steel workas in hold fasts, dowel bars, hooks for hanging fans, plate washers and similar small articles conforming to Fe-290 Gde-E-165
S&F 100 mm Butt hinges, medium weight, cold rolled mild steel.
S&F 300 mm Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed.
S&F Aluminum extruded section body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg.
S&F 150mm Floor door stopper of brass body and tongue with hard drawn steel spring.
S&F decorative type Brass /Bronze curtain rods including all fittings such as end stopper, wall/side braclet etc.
S&F 500 ltr capacity PVC water storage tank cylindrical, vertical with closed top with threaded cover hoisted and fixed in position tank capacity 500 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminum rod and high density plastic ball screwed for 20mm bore of iron pipe and making connection for inlet and outlet complete all as specified and directed.
Cutting chases, pinning in, making good to facing where required and pointing in Cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water pipe etc and making good, cutting not exc 10cm width or girth complete all as specified and directed.
S&F 15mm dia bore GI tubing medium grade fixed to wall or ceiling or laid in floors etc complete all as specified and directed.
S&F 75mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement including fixing waste pipe etc complete all as specified and directed.
S&F pedestal vitreous china wash hand basin white flat back of size 450mmx300 mm including cutting for and pinning in ends of brackets or errecting stand but including of fixing of waste pipe and CI brackets complete all as specified and directed.
S&F vitreous china wash down water closet pan of pedestal pattern with seat cover, white with 'P' or 'S' traps, including connecting to trap and to flushing pipe etc complete all as specified.
S & F 10 litres PVC, Syphonic action type, Flushing cistern low level, white with inlet ball valve float chain and pull and brackets complete.
S&F for 15mm Central Hole brass CP wall mixer for WHB and wall mixing hot & cold water screwed down for iron pipe complete all as specified and directed.
S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
S & F for CP15mm dia stop cock cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified
S & F PVC connection 15mm dia 450 mm long with brass check nuts and washers
S&F for toilet paper holder supar of brass chromium plated fitted to wall with CP/ brass screws of complete all as specified and directed”
S&F CP towel rail 450mm , fixed with chromium plated brass screws
S&F soap dish, any type, fiexd to plugs with chromium plated brass screws
S&F for Formwork to sides of pillars, posts, struts, piers, columns and stanchions, for flat rough finished surface, complete all as specified and as directed.
S&F for Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc, for flat rough finished surface, complete all as specified and as directed.
S&F for Formwork to Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), for flat rough finished surface, complete all as specified and as directed.
M&L grade (I) Autoclaved cellular (Aerated) concrete (AAC) block of min compressive strength 50Kg/cm2 as in masonry in 200 mm thick CM (1:6) or 3-4 mm thin bed mortar / adhesive, complete all as specified and as directed.
M&L 15 mm thick cement plaster (1:4) with liquid water proofing compound in outer layer only as per manufacturar instructions on other than fair faces of brick work or concrete surfaces, finished surface even and smooth without using extra cement, including making 12mm wide groove at the junction of walls and RCC elements, complete all as specified and as directed.
M&L 15 mm thick cement plaster (1:6) on fair faces of brick work or concrete surfaces, finished surface even and smooth without using extra cement, including making 12mm wide groove at the junction of walls and RCC elements, complete all as specified and as directed.
Suppy only liquid water proofing compound.
M&L for light colour vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry/ epoxy mortar and pointed with grout of the same shed as the colour of tiles including 15 mm thick screed bed in CM 1:6, complete all as specified and as directed.
Ditto as above item No 89 but as in vertical surfaces such as skirting, dado etc.
M&L colour Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry/ epoxy mortar and pointed with grout of the same shed as the colour of tiles including 15 mm thick screed bed in CM 1:6, complete all as specified and as directed.
M&L colour glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.
Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto complete all as specified and directed.
M & L 50mm thick PCC 1:2:4 type B2 using 40mm graded aggregate, laid in panels as in floor, finished surface even and smooth without usibg extra cement, complete all as specified and as directed.
Supply and fix plastic dividing strips, 1.5mm thick, inserted in position, conform to design complete all as specified and as directed.
M&L for well consolidating hard core of broken stone, broken to gauge n exc 63 mm complete all as specified and as directed.
M & L 75mm thick PCC 1:3:6 type C2 using 40mm graded aggregate, laid in panels as in floor, including making construction joint at every 3 m interval and corners of building and filled with bituminious mastic or equivalent filler, finished surface even and smooth without using extra cement, complete all as specified and as directed.
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240, complete all as specified and as directed.
S&F mild steel work as in wind ties for roof sheet including all necessary drilling, bolting or riveting, etc, including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed.
S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flangesof 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat andsteel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.
S&F 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish after applying two coat of oil bound distemper over one coat of wall care putty, complete all as specified and as directed.
M&L for treating the top surface of filled earth, soil under plinth protection etc with Anti-termite treatment using chemical CHLOROPYRIPHOS 20 EC confirming to IS-8944 or Lindane emulsifiable concentrate of 20% with 1% concentrate, at the rate of 5 litres of emulsion per square etre of surface, complete all as specified and as directed.
S&F for Providing and fixing factory made uPVG white colour Sliding window Area not exceeding 2.00 sqm each Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)
Ditto as above but area exc 2.00 Sqm each
Supply only 4 mm thick Sheet glass, ordinary quality, in squares n exc 0.5 sq. m each.
S&F factory made 2nd class hardwood Glazed and skeleton shutters 35mm, open rebated and prepared to receive glass, gauze, etc, divided into squares, with plain, chamfered or roun ded, mitred and rebated sash bars, any numbers fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats, complete all as specified and as directed.
Supply only galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples
S&F 35mm factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of 2nd class hard wood rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick wood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and as directed.
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel aving a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side Prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Prelam PVC sheet on both side to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F mild steel framed work as in grills, gratings etc with ends of bars shouldered and riveted or forged into spikes, framed guard bars, barred iron doors etc, conforming to Fe-290, Gde-E-165 all as specified and directed.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and as directed.
M&L for providig precast cement concrete in cover slabs using type B1 1:2:4 & setting in CM 1:6
M&L for Plain cement concrete (1:3:6) type C-2, using 40mm graded stone aggregates in surface channel, bed of drains incl form work / moulds complete all as directed.
Extra for fair finishing drain or channels 30 cm inner girth in cement concrete using extra cement including forms, moulds etc.
S&F PVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints fixed to walls.
S&F PVC (SWR) pipes 150mm dia single sockted in any length with rubber ring joints fixed to walls.
Material and labour for providing PCC (1:3:6) type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes of bore 150mm on after they are laid and tested complete all as specified and directed..
S&F PVC (SWR) bends any radius , 110mm dia.
Material & Labour for light/fan Point wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (FRLSH)single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly upto Ceiling rose/light point complete all as specified and directed.
All as per item No. 121 here in before but for one 3 pin socket outlet 5 Amps three pin controlled by one switch on independent board complete all as specified directed.
M&L for Point wiring for one socket outlet 15 Amp on independent board with 4 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (FRLSH)single core multi-stranded copper conductor cable of size 2.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.
S&F for socket outlet 2 in 1, 5 pin, 5Amp flush type universal all as specified and directed.
S&F for socket outlet 2 in 1, 5 pin, 5Amp and 15Amp flush type universal all as specified and directed.
Supply & fixing switch piano flush type (ISI marked), single pole, one way 15 Amp, 240 Volts complete all as specified & directed.
Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed.
Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed.
Supply and fixing regal batten for LED Tube universal batten for G 13 T8 lamps including making electric connection from Ceiling Rose to tube light fitting including photon ultra plus LED tubelight 20W (single side connection) ultra bright LED Polycarbonate Tubelight with 10% THD with very high efficiency suited for installation in existing T8 Tubelight with G13 lamp holder to give glare free light with integrated electronic driver complete all as directed by Engr in Charge.
S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.
Supply & Fixing sheet metal enclosure with double door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral link & earth bar and cement spill protector, 8 way, 240 Volt incl fixing on suitable size of PVC rectangular plastic laminated sheet complete all as specified and directed.
Supply and fixing miniature circuit breaker (MCB) SPN 32 AMP, 240V, 10KA, 'C' curve in the MCB DB complete with connection testing and commissioning as specified and directed.
S&F MCB SP having braking capacity 10KA, 6 to 32 Amps, 240 V complete all as specified and directed.
Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor 16 sq mm, served with inner sheathing of PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular complete all as specified and directed.
Supply and fix electric operated storage water heater (Geyser) capacity 25 ltrs capacity vertical type 2KW suitable for operation on AC 230 volts having facility for inlet and outlet water supply connection, indication lamp Red and green with auto cut off system including installation in position with necessary fixing clamp, studs, nut, bolts and washers and grouting in walls and cement work compite and making necessary arrangement for inlet/outlet water supply connection for cold/hot water and texting complete all as directed.
M&L for Galvanised steel tubes, medium grade for hot & cold water supply of 15mm dia including all random fittings fixed complete to walls, ceilings or in floors etc & testing after laying up to entire satisfaction of engr-in charge all as specified & as directed by engr-in-charge.
S&F Stop valves, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of size 15 mm.
S&F Bib tap chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified & as directed by engr-in-charge.
Supplying & Fixing of CP metalic connection pipe, nylon thread reinforced 15 mm dia, 450 mm long with brass union at both ends for 15 mm dia pipe complete all as specified and as directed.
Supply and fix electric exahust fan suitable for operation on AC 230 volts 50Hz RPM 1200, Copper winding of sweep 300mm having facility for including installation in position with necessary fixing clamp, studs, nut, bolts and washers and grouting in walls and cement work compite and making necessary arrangement and texting complete all as directed.
S&F lamp holderinsulated body PVC/ polycarbonate type with back plate for batten fitting with one PVC block of complete all as specified and directed.
S&F for 1x 9/10 watt LED lamp complete all as specified and directed.
S&F for Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below notmal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 25mm bore with funnel wire mesh and medium grade GI wire protection pipe 25mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point complete ass as specified and testing on completion complete ass as specified and directed .Note - The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI pipe (light grade) for watering 25mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made.
M/S SUNRISE CONSTRUCTION AND CO (BID ID -3082774)
M/S ASHOK CONSTRUCTION (BID ID -3083171)
M/S DK TRADERS (BID ID -3083387)
M/S N D ENTERPRISE (BID ID -3083252)
M/S SM ANSARI (BID ID -3083487)
D.P. Traders (BID ID -3083586)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .