8111/E8 CREATION OF ADDL PT INFRA (PH-I) AT OTA CHENNAI UNDER GE STM

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/ dense soil

All as per item No 01 above but depth exc 1.5 m in depth and n.exc 3m depth and getting out in hard/ dense soil

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface, in hard/dense soil

M&L for plain cement concrete 1:4:8 type D2 as in foundations, filling and mass concrete

M&L for MS plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections, Fe 410 -W (Gde E- 250, quality 'A'

M&L for roof trusses (framed), trussed, purlins, rafters, crane gantries, rails and fastenings and heavy bracket framing, cleat etc., (Beam, Tee, Angle, Channel or Flat sections) including distance pieces, cleats etc., Fe 410-W (Gde E-250) quality 'A'

M&L for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

M&L for plain cement concrete 1:2:4 type B-2 as in foundations, filling and mass concrete

Supply only sisal natural jute rope untarred variety of dia 40mm having minimum breaking strength of 3 KN, stiff & sturdy best quality confirming to IS-1321 Part:1 (2003)

Supply only sisal natural fibre rope untarred variety of dia 32mm having minimum breaking strength of 3 KN, stiff & sturdy best quality confirming to IS-1321 Part:1 (2003)

M&L for MS hook to hold rope including adjustable Turntable rod of dia 32mm, 0.90m long welded to 'I' beam

M&L for Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4

Sand filling under floors or in foundations including watering and consolidation

Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L for 75mm thick plain cement concrete type D-2, 1:4:8 as in sub base

M&L for 50mm thick plain cement concrete type B-1, 1:2:4 as in floor/paving

Glass dividing strips, 3 mm thick, inserted in position, conform to design, width of strip 38mm

Two coats of synthetic enamel paint over a coat red oxide primer incl preparing steel Surfaces of any description, over 10cm in width or girth, not otherwise described

Returning, filling in, using excavated soil including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated surplus material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

Supply only GI pipe 60mm dia medium grade (Note: Fabrication and erection and welding etc will be measured and paid separately)

Supply only GI pipe 32mm dia medium grade (Note: Fabrication and erection and welding etc will be measured and paid separately)

Fabrication and erection including cutting to dead length wherever required, notching, drilling, fitting riveting and /or welding or connecting with bolts and nuts etc

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil

M&L for 100mm thick plain cement concrete type D-2, 1:4:8 as in sub base

M&L for 100mm thick plain cement concrete type B-1, 1:2:4 as in floor/paving

Supply only GI pipe 125mm dia medium grade

M&L for mild steel screw bolts (machine made) with hexagonal head at one end and screwed the other end, each screwed end to be fitted with washers and one hexagonal or square nut n.exc. 5 cm long, 12mm dia complete all as specified and as directed

M&L for 30 MS pulley suitable for 102 mm circumference sisal rope holding dia and an opening gate on one side to put the rope inside the pulley

M&L for plain cement concrete 1: 2: 4 type B-0, using 12.50mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L for 50mm thick plain cement concrete type D-2, 1:4:8 as in sub base

M&L for 40mm thick plain cement concrete type B-1, 1:2:4 as in floor/paving

M&L for plain cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L for first class Hard wood Plain, solid, straight, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed as in chin up excercies equipments

M&L for 50mm thick plain cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base

M&L for 40mm thick plain cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in floor

M&L for 9mm thick Plywood, grade BWP, type BB fixed with screws to timber frame work

Foam 9" width, 3" thick rexin fixed over 9mm thick ply wood with nut and bolt as per manufacture instructions Note : ply wood will be measured and paid separately

RAVI ENTERPRISE

Kaadosh Real Estates Pvt Ltd

GOKUL ENTERPRISES

ASHWIN ASSOCIATES