GE(U)/CHM-50/2021-22 REPAIRS TO JOINERY SANITARY FITTINGS FLOORING PLUMBING CEILING PERIODICAL SERVICES AND INTERNAL ELECTRIFICATION AT OTM / MD ACCN AT COMMAND HOSPITAL AREA CHANDIMANDIR

Amount

Taking down chowkhats or frames n. exc 1.5 sqm each (without taking off shutters from the frames) including cutting out holes for taking out holdfasts and filling the same with PCC 1:2:4 (12.5 mm graded aggregate) , forming jamb if required and plastering jamb cill soffits with CM 1:4 full thickness of wall and side of walls if broken upto 300mm each side during dismantling and making good surfaces with preparation and painting the surfaces with two coats of matching colour on outer and inner surface of wall complete all as specified and as directed. Note : Rate also includes labour and material cost of PCC and bricks if required to make good the surface jambs , plastering and painting with matching shade upto complete satisfaction of Engr-in-Charge

All as per item No 1 above but exc. 1.5 Sqm and n. exc 4 Sqm each

Taking down shutter of any description exc 1 sqm but nexc 2 sqm each all as directed.

Taking down shutter of any description exc 2 sqm each all as directed.

Taking down shutters of any description exc 1 Sqm and not exc. 2 Sqm each and refixing in same opening after resecuring or easing, cutting and adjusting etc complete all as specified and as directed.

Factory made steel windows (Box type) with glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, complete all as specified and as directed.

Factory made steel windows (Box type) w/o glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, complete all as specified and as directed.

Framed work such as grills, grating, framed guard bars, walk ways, railings etc. using steel conforming to Fe-310-O or Fe-410-O fixed as in repair complete all as specified and as directed.

Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed (Size of frame 125 x 60mm), complete all as specified and as directed.

35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (with out shash bar), edges of framing with plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and as directed.

Panelled shutter (Factory made) 35mm thick of second class hard wood (hollock), edges of framing plain chamfered or rounded, fitted with cut & mitre

30 mm thick flush shutter, solid core construction with particle board core and plywood face panel, commercial type on both side complete all as specified and as directed.

Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and as directed.

Factory made solid PVC moulded door shutters with particle board core 28 to 30 mm thick (stile), with 2, 4 or 6 raised panel design with 2mm thick single piece extruded PVC profile on the front face & 2mm plain coloured single piece extruded PVC profile on back face etc complete all as specified and as directed.

Aluminium barrel tower bolt, 150 mm long, extruded section, fixed in repairs, complete all as specified and as directed.

Aluminium barrel tower bolt, 150 mm long,extruded section, fixed in repaies, complete all as specified and as directed.

All as per item No 16 above but 100mm long

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long, fixed in repairs, complete all as specified and as directed

Cold rolled mild steel butt hinges 100 mm long medium weight complete all as specified and as directed.

Continuous piano type hinges mild steel bright finish or electro galvanised width of flap 30 mm (when opened), fixed in repais, complete all as specified and as directed.

Steel helical door spring 300mm ordinary rat rail rod pattern springs including roller plate complete all as specified and as directed.

150mm long extruded aluminium alloy handle, fabricated type, anodised etc complete all as specified and as directed.

150mm long extruded aluminium alloy handle, fabricated type, anodised, fixed in repairs, etc complete all as specified and as directed.

Mortice lock brass 4 levers, vertical type 100 mm, fixed in repairs, complete all as specified and as directed.

40 mm dia cup board knobs fixed with nuts, screws and washers of mild steel bright finish, fixed in repairs, complete all as specified and as directed. (Make : As per sample)

150mm size aluminium anodised hasp and staple with mild steel hinge pin including bolt to hinge plate and fixed with screws etc complete all as specified and as directed.

Steel window handles, peg stays & Hinges etc (Including welding if required) as per sample, fixed in repairs, complete all as specified and as directed.

Powder coated aluminium alloy curtain rails 20mm dia fixed to required lenghts etc, fixed in repairs, complete all as specified and as directed.

Brass chromium plated curtain rails brackets fancy type for 20mm dia curtain rails etc, fixed in repairs, complete all as specified and as directed.

Floor door stopper of aluminium alloy body and tongue anodised, with hard drawn steel spring fixed in floor overall length of cover plate 150mm etc, fixed in repairs, complete all as specified and as directed.

Aluminum (extruded section body) door closer hydraulically regulated, universal type suitable for door 61 to 80 Kg of approved make, fixed in repairs, complete all as specified and as directed.

Stain less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or aluminum wire staples complete all as specified and as directed.

Stain less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or aluminum wire staples, fixed in repairs, complete all as specified and as directed.

MS holdfast of FI 25x3 confriming to Fe 290 Gde E-165 complete all as specified and as directed.

Powder coated aluminium frames (Thickness of powder coating not less than 50 micron) for doors , windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified (Thickness of section not less than 3.00MM)

Powder coated aluminium door shutters made out of hollow extruded aluminium sections as mentioned below with and including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, tower bolts, anodised aluminium snap beading, screws to hold glass/ prelaminated particle board etc complete all as specified & as directed comprising the following :- (a) Top rail :100mm x 44-45mm, 2.00mm thick (b) Middle & Bottom rail - 150mm x 44-45, 2.00mm thick (c) Vertical styles :83-84mm x 44-45mm, 2.00mm thick

Powder coated aluminium window and ventilator shutter made out of hollow extruded aluminium sections as mentioned below with and including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws/U section to hold glass & wiremesh, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified & directed comprising the following :- (a) All rails stiles shall be 83-84mm x 44-45, 2.00mm thick

0.56mm thick plain aluminium sheeting as in ridges, hips, valley gutter, drip and straight flashing etc, fixed in repairs, complete all as specified and as directed.

Dismantling of wooden boarding of any description and fixed in any position with screws etc complete all as specified and as directed.

12mm thick plywood, grade BWR, type BB, fixed with screws to timber framed work etc complete all as specified and as directed.

17/18mm thick pre laminated PVC Solid board, pre laminated both side with white lamination as in cupboard side box,cupboard shutters, shelves and drawers fixed with screws and adhesive (Each Individual part will be measured seprately) complete all as specified and as directed.

9mm thick pre-laminated particle board, interior grade, pre-laminated both side with decorative choice lamination, ISI marked ( IS: 12853) fixed as panels in aluminium joinery etc in repair complete all as specified and as directed.

Hacking out old broken glass of any thickness, size quality or description from wooden frames glazed with putty or fixed with bead complete all as directed.

3mm thick tinted glass, ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each pane complete all as specified and as directed.

All as per item No 45 above but exc 0.50 sqm in each pane.

All as per item No 45 above but 4mm thick frosted glass

All as per item No 45 above but 5.5mm thick glass.

Preparation of new wood surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Preparation of old wood surface of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

Dismantling floor, hearth and wall tiling including cement mortar bedding (but excluding backing), removing unserviceable tiles from outside of CH (WC) Chm complete all as directed.

Coloured Non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 Sqm but n. exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and incl 15 mm thick screed bed or bedding layers in CM (1:6) etc complete all as specified and as directed.

Glazed ceramic coloured tiles of size 300mmx450mmx7mm thick, set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as skirting, dados and risers to steps etc to match including 10 mm thick screed bed or bedding layers in CM (1:4) complete all as specified and as directed.

Coloured Vitrified ceramic tiles digital 10mm thick (square/rectangular) polished, area of each tile n. exc 0.36 sqm, in floors etc. with and including 15mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed.

All as per item No 54 above but on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in CM (1:4) etc complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thick ness in floors aprons etc laid beded and pointed in any mortar, complete all as specified and as directed.

Granite (of any type) work 18 to 20 mm thick (table rubbed and polished) in flooring, steps, jambs, pillars, window cills, cooking platforms, vertical surfaces/wall lining and like with and including 15mm thick bedding in CM 1:6 and pointing in white cement (1:2) using marble dust with admixture of pigment to match the colour of tiles etc complete all as specified and as directed.

Extra over Granite or marble slabs as in rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and as directed.

M&L for machine cut kota stone slab flooring (pre-polished) 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 20 mm thick screed bed in CM (1:6) complete all as specified and directed.

All as per item No 59 above but in skirting/dado including 10 mm thick screed bed in CM (1:4) complete all as specified and directed.

Demolition of brick/stone massonry work built in cement mortar as in wall including all quoins, arches, pillars etc complete all as directed.

Brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed

Rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed

15 mm thick rendering in CM 1:4 on brick/concrete external surfaces of walls finished even and smooth without using extra cement etc complete all as as directed.

Rendering 5 mm thick in CM (1:3) as in ceiling finished even and smooth without using extra cement complete all as specified and as directed

Preparation of newly plastered surface of ceiling and applying three coats of white wash etc complete all as specified and as directed.

Preparation of old plastered surfaces of ceiling and applying one coats of white wash complete all as specified and directed.

Preparation of newly plastered surfaces of wall and applying two coats of cement base paint etc complete all as specified and directed.

Preparation of old plastered surfaces of wall and applying one coats of cement base paint etc complete all as specified and as directed.

Preparation of old plastered surfaces of wall and applying one coats of white wash complete all as specified and directed.

Preparation of old plastered surfaces of wall and applying one coat of oil emulsion distemper etc complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying one coat of alkali resistant primer over a coat of birla white cement putty, sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper etc complete all as specified and as directed.

Preparation of old plastered surfaces of wall and applying one coat of plastic emulsion paint etc complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting any gauge/thickness in roof or wall covering complete all as specified and as directed.

Pre-painted galvalume aluminum and zinc alloy coating with steel based corrugated steel sheet 0.50mm thick of a colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws etc complete all as specified and as directed.

All as per item no 76 above but in ridges to suit the profile of roofing.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as specified and as directed.

False ceiling of perforated particle designer boards of size 595mm x 595mm x 4mm thick fixed on precoated GI everest grid of tee 2430, framed and suspended with 4mm dia wire including clips etc in patterns as approved by GE, in panels of size 605mm x 605mm fixed in ceiling with necessary fitting and fixtures as per manufacturers instructions, etc complete all as specified and as directed.

Providing and fixing Gypsum board ceiling with tiles of size 595mm x 595mmx12mm thick having PVC paper on front side and metalised polyster layer on the back side suitable placed in existing false ceiling grid made of aluminium /GI/MS as per manufacturers instruction etc complete all as specified and directed.

Demolition of PCC of any description and in any position not otherwise specially provided for including removal of spoils/ demolished materials etc complete all as specified and directed.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:3) , finished even and smooth with neeru finish and including liquid water proofing compound @ 200 ml per bag of cement etc complete all as specified and as directed.

Welding in repairs exc 2.5 cm but n. exc 5 cm in length & n. exc. 6mm thickness of metal to be welded complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise complete all as specified and as directed.

Rolled mild steel work in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes and painted with one shop coat of zinc chromate primer paint complete, tubes conforming to IS 1161-1998, complete all as specified and as directed.

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Preparation of old steel surface and applying one coat of synthetic enamel paint complete all as specified and as directed.

500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia Ball brass valves, high pressure, with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed in repairs, etc complete all as specified and as directed.

All as per item No 88 above but 1000 litres capacity

PVC sintex water storage tank lid cover (cylindrical) for water tanks of any capacity, fixed in repairs, etc complete all as specified and as directed.

GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors including taking down GI tubing with all fittings etc complete all as specified and as directed.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintel etc and cutting chases for concealed water tubing or concealed conduit wiring etc n. exc. 10 cm width or girth complete all as specified and as directed.

GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors including taking down GI tubing with all fittings etc complete all as specified and as directed.

Bib taps 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter fly handles screwed down for iron pipe or for brass ferrule, fixed in repairs, complete all as specified and as directed.

15mm size fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs, etc complete all as specified and as directed.

15mm bore brass CP fancy Type center hole basin mixer for mixing hot & cold water screwed down for iron, fixed in repairs, etc complete all as specified and as directed.

Angular stop valves 15 mm dia cast copper alloy, chromium plated, fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions, fixed in repairs, complete all as specified and as directed.

Stop valves 15 mm dia cast copper alloy, chromium plated, fancy type with long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions, fixed in repairs, complete all as specified and as directed.

20mm bore dia Ball brass valves, high pressure, with polythene float and flynut complete,screwed for iron pipe or brass ferrule, fixed in repairs, etc complete all as specified and as directed.

Waste pipe/ fitting (brass, chromium plated) of any size for sinks, wash basins, etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other and fixed in repairs, etc complete all as specified and as directed.

Ball valve of PVC complete with aluminum rod with polyplast ball for 15mm dia iron pipe, fixed in repairs, complete all as specified and as directed For low level flushing cistern (Make : slimline or equivalent)

Bib tap 15mm PTMT, fancy type any colour high pressure screwed for iron pipe and fixed in repairs, etc complete all as specified and as directed.

sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm including waste pipe of polythelene of low or high density or PVC 32mm dia & waste fitting brass chromium plated for 32mm bore with long screwed shanks and fly nuts including making holes in stone walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0 complete, fixed in repairs, etc complete all as specified and as directed.

Stainless steel plate rack 900mmx600mm x 200mm deep with plate racks, spoon holder, shelves etc complete all as specified and as directed.

Elegent mirror PVC cabinet with towel rail of size 475 x 600 x 150 mm, fixed in repairs, complete all as specified and as directed.

Brass chromium plated shower rose 125mm size (ABS body face plate with single flow including shower arm with wall flange 15mm bore), fixed in repairs, etc complete all as specified and as directed.

CP Toilet paper holder, fixed to walls with CP brass screws, fixed in repairs, etc complete all as specified and as directed.

Viterous china squatting pan Orissa pattern size 580 x 440mm white with 'P' or 'S' trap, front or back inlet, integral foot rest (excluding flushing cistern and flush pipe) including provision of lime concrete bedding and connections to flushing cistern/pipe and making good disturbed portion to match existing surface, fixed in repairs, etc complete all as specified and as directed.

Flush pipe PVC for low level flushing cistern including jointing to WC, fixed in repairs, complete all as specified and as directed. ( Make : As per sample)

Vitreous china wash down water closet pan (pedestal pattern) white, including seat cover, closed pattern with flat bottom and cover with chromium plated hinging device, fixed in repairs, complete all as specified and as directed.

Plastic water closet seat cover white /colour, closed pattern with flat bottom end cover and mild steel chromium plated hanging device, fixed in repairs, etc complete all as specified and as directed.

Vitreous china wash basin white flat back size 550 mm x 400mm including all fittings including cutting for and pinning in ends of brackets or erecting stand etc complete (waste coupling 32mm bore CP, 32mm bore PVC waste pipe, cast iron brackets, fixed in repairs, etc shall be deemed to be included in the quoted rate)

Fancy type Brass chromium plated soap dish fixed with screws and wooden/plastic cleats, fixed in repairs, etc complete all as specified and as directed.

Glass shelf assembly consisting of 5.5mm thick sheet glass shelf of size 600x120mm with brass chromiun plated fancy brackets and railing fixed with screws and wooden/plastic cleats, fixed in repairs, etc complete all as specified and as directed.

PVC low level flushing cistern, white, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe, fixed in repairs, complete all as specified and as directed.

PVC syphone with adjustable handle complete for flushing cistern, fixed in repairs, complete all as specified and as directed.

110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor/fixed to walls, fixed in repairs, etc complete all as specified and directed

110 mm dia PVC (SWR) bends of any radius complete all as specified and as directed

Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms), fixed in repairs, etc complete all as specified and as directed.

15 mm dia 450 mm long PVC connection pipe with 02 Nos nut at each ends with rubber washer, fixed in repairs, etc complete all as specified and as directed.

Fancy type Brass chromium plated 600mm long Towel Rod fixed with screws and wooden/plastic cleats, fixed in repairs, etc complete all as specified and as directed.

75mm dia cast iron nahani trap/floor trap, with stainless steel grating including grating jointing to waste pipe fixed in cement concrete type B1 (1:2:4) including taking out old floor trap complete all as specified and as directed.

Brass chromium plated fancy type health faucet or aeroplane jet with 900mm long stainless steel knitted hose pipe for faucet/sensor mixer, fixed in repairs, etc complete all as specified and as directed.

Point wiring using approved colour coding as per IS (For phase and neutral), with stranded copper conductor 1.5 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC concealed conduit with fittings ISI marked, terminated in junction box incl 1.5 Sqmm (Nominal area) single core, multistranded, FRLS, PVC insulated and unsheathed cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified and as directed. for the following :- Make of cable : Plaza/Finolex/Havells

One light point controlled by one switch/one fan point/one bell or buzzer controlled by one switch & fan regulator.

One socket outlet three pin, 5 Amps on the same board.

One socket outlet three pin, 5 Amps, independent.

One light point controlled by one bell push.

Point wiring using approved colour coding as per IS (For phase and neutral), with stranded copper conductor 2.5 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cabel 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC concealed conduit with fittings ISI marked, terminated in junction box incl 2.5 Sqmm (Nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete for one power point 15 Amps all as specified. Make of cable : Plaza/Finolex/Havells

Point wiring using approved colour coding as per IS (For phase and neutral), with stranded copper conductor 4 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cabel 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC concealed conduit with fittings ISI marked, terminated in junction box incl 4 Sqmm (Nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete for one power point 15 Amps complete all as specified and as directed. Make of cable : Plaza/Finolex/Havells

Point wiring using approved colour coding as per IS (For phase and neutral), with stranded copper conductor 1.5 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC caping and casing with fittings ISI marked, terminated in junction box incl 1.5 Sqmm (Nominal area) single core, multistranded, FRLS, PVC insulated and sheathed cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified Make of cable : Plaza/Finolex/Havells

Point wiring using approved colour coding as per IS (For phase and neural), with stranded copper conductor 2.5 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cabel 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC casing and caping with fittings ISI marked, terminated in junction box incl 2.5 Sqmm (Nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete for one power point 15 Amps all as specified. Make of cable : Plaza/Finolex/Havells

Modular metal flush terminal boxes with lumina plate and frame suitable for 3 module complete all as specified and directed. Make :SSK/Legrand/Anchor

Modular metal flush terminal boxes with lumina plate and frame suitable for 4-5 module complete all as specified and directed.

Modular metal flush terminal boxes with lumina plate and frame suitable for 6 module complete all as specified and as directed.

Modular metal flush terminal boxes with lumina plate and frame suitable for 8 module complete all as specified and as directed. Make :SSK/Legrand/Anchor

Switch modular type single pole one module, 6 Amps complete all as specified and as directed. Make :SSK/Legrand/Anchor

Switch modular type single pole one module, 16 Amps complete all as specified and as directed. Make :SSK/Legrand/Anchor

Socket outlet mdoular type, multipurpose, 2/3 pin, single pole two module, 6 Amps complete all as specified and as directed. Make :SSK/Legrand/Anchor

Socket outlet mdoular type, multipurpose, 2/3 pin, single pole two module, 6/16 Amps complete all as speciifed. Make :SSK/Legrand/Anchor

Modular bell push single pole one module, 6 Amps complete all as speciifed. Make :SSK/Legrand/Anchor

Supply and fixing modular blank plate one module.

Modular fan step regulator 120 watts for 48"/56" sweep ceiling fan 2 module complete all as specified and as directed.

Ceiling rose 3 pin, 230 volts PVC polycarbonate insulated body complete all as specified. Make : SSK/CONA/ANCHOR.

S&F Bell ding dong AC 230 volts PVC polycarbonate insulated body complete all as specified. Make : CONA/ANCHOR/LEGRAND.

Supply and fixing in replacement LED battern made out of CRCA MS sheet 4 feet long ,box with miniumu depth of 25mm with front openable cover both side connection arrangement suitable for rertrofit led tube complete all as specified and directed. Make :Crompton/C&S/Havells/ Bajaj/Philips/ Panasonic

Supply fixing in replacement Retrofit LED tube light 18/20 watt minimum lumens 1980 of 4 feet size with adjsutable holder with back spring with aluminium housing heat shrink both end connection, complete all as specified and as directed. Make :Crompton/C&S/Havells/ Bajaj/Philips/ Panasonic

LED new generation battern fitting of capacity 18/20 watt ,6000k including 18/20 watt LED strip,surface mounting drivers and all connected accessories as per manufactures catalogue including fixing arrangement with existing wall/roof including taking down existing complete all as specified and directed. Make :Crompton/C&S/Havells/ Bajaj/Philips/ Panasonic

Supply and fixing in replacement Deep type recess mounted LED 42 watt Luminaire equiped with CRCA powder coating housing , antiglare diffuser with separate energy electronic driver of capacity 42 Watt minimum, 5700 K , 595mmX595mmX75mm dimensions, including fixing arrangement with existing complete all as specified and directed. Make :Crompton/C&S/Havells/ Bajaj/Philips/ Panasonic

Supply and fixing in replacement Indoor decorative LED battern with milky diffuser including 8 - 10 Watt 5700K LED strip including driver ,accessories to fix the same with existing wall and all connected accessories as per manufacturers recommendation complete all as specified and directed . Make :Crompton/C&S/Havells/ Bajaj/Philips/ Panasonic

Supply fix in replacement of surface/recess mounted slim squre type led panel with die cast aluminium housing and smooth power coated finish with anti glare UV stabilized diffuser and separate energy efficient eletronic driver having wattage 10 watt LED panel light,3000k,having dimension 120mmX120mmX35mm and making connection accessories complete all as specified and directed. Make :Crompton/C&S/Havells/ Bajaj/Philips/ Panasonic

Supply and fixing in replacement LED Luminaire 36 Watt, 6500 K suitable for armstorng/grid cealling/surface mounting, with its super bright LED, 2X2 GRID CEILING,including 36 watt LED strip recess mounted complete with drivers and others accessories as per manufactures recommendation complete including fixing arrengement with existing including taking down existing complete all as specified and directed. Make :Crompton/C&S/Havells/ Bajaj/Philips/ Panasonic

Supply and fixing in replacement of Bulk head Aluminium housing reliable LED solution with milky diffuser including 10 Watt 6500K LED strip including driver ,accessories to fix the same with existing wall and all connected accessories as per manufacturers recommendation including taking down existing complete all as specified and directed. Make :Crompton/C&S/Havells/ Bajaj/Philips/ Panasonic

Supply and fixing in replacement of LED building security light made up of pressure die cast housing with toughned glass and individual high power LEDs with capacity 25 watt including LED strip,5700K,IP66 protection and impact resistence of IK 07 suitable for pole od dia 43 mm max including bracket ,angle and fixing material including taking down existing complete all as specified and directed Make :Crompton/C&S/Havells/ Bajaj/Philips/ Panasonic

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials deposited in store for keeping in safe custody and making good disturbed surfaces of walls, floors etc. complete all as specified and as directed.

Sub main wiring in replacement (with approved colour coding as per IS) with single core FRLS PVC insulated multistranded copper conductor cable 1.1 KV grade (main cable two runs of main cable) alongwith one run of single core FRLS PVC insulated flexible stranded copper Conductor 1.1 KV grade of earth for earthing drawn in suitable PVC conduit/ concealed conduits with following size:- NOTES: (i) Conduit & conduit accessories shall be measured & paid for separately. (ii) For payment purposes, total runs of main cable (each run of one running metre) as mentioned above and one run (one running metre) of earth cable shall be considered together as "1 RUNNING METRE" MAKE OF CABLE: FINOLEX/RPG/PLAZA./Havells

2 run of 6 Sqmm cable + 1 run of 6Sqmm

2 run of 4 Sqmm cable + 1 run of 4Sqmm

25mm dia, rigid non metallic PVC concealed conduit, 'ISI marked', inclusive of all fittings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing accessories such as couplers lock nuts, saddless, pipe hooks etc for wiring, complete all as specified and as directed.

Cutting chases in existing wall for laying of PVC conduits including making good disturbed surfaces of wall after concealing the conduit in wall complete all as specified and as directed.

Taking down carefully opper/aluminium sub main wiring complete, including existing batten/conduit etc. removing materials deposited in store for keeping in safe custody and making good disturbed surfaces of walls, floors etc. complete all as specified and as directed.

Supply and fix in replacement MCB DB, horizontal single phase consumer unit with provision for incoming 2 pole (MCB / Isolator / RCD) and single phase outgoing, suitable for surface and flush mounting, IP 43 protection, double door of metal 12 way complete all as specified and as directed. Make : Legrand / C&S/Havells/Indoasian

Supply and fixing in replacement of MCB DB, horizontal single phase consumer unit with provision for incoming 2 pole (MCB / Isolator / RCD) and single phase outgoing, suitable for surface and flush mounting, IP 43 protection, double door of metal 8 way including taking down existing complete all as specified and directed. Make : ABB/Hager/Legrand/Havells

Supply and fix in replacement MCB SPN, 'B' series. 10 KA, 240 Volts 40 Amps capacity. Make : Legrand/ C&S/Siemens /Havells./Hager

Supply and fix in replacment MCB SP, 'B' series. 10 KA, 240 Volts, 40 Amps capacity. Make : Legrand/ C&S/Siemens /Havells./Hager

Supply and fix in replacment MCB SP, 'B' series. 10 KA, 240 Volts, 6-32 Amps capacity. Make : Legrand/ C&S/Siemens /Havells./Hager

Supply and fix in replacment MCB TPN , 'B' series. 10 KA, 240 Volts, 63 Amps capacity. Make : Legrand/ C&S/Siemens /Havells./Hager

Supply and fix in replacement flush type single pole, one way 5 Amps 240 volts complete all as specified and as directed.

Supply and fix in replacement socket outlet 2-in-1,3 pin, 5 Amps flush type.

Supply and fix in replacement flush type single pole, one way 15 Amps 240 volts complete all as specified and as directed.

Supply and fix in replacement socket outlet 2-in-1, 3 pin, 5 and 15 Amps flush type complete all as specified and as directed.

Supply and fixing only caping casing 20/40/25 mm as per requirement of sight any ISI marked

Supply and fixing electronic driver of 36 watt,2.5 KV search protection as per existing in site suitable of LED Ceilling light 2X2 ,1X 4 ft , input suppply 140V -270V and output 12 Volt DC. Make : Crompton/Hallonix/Panasonic

Supply and fixing sheet metal enclosure Two way , two module ,IP30 degree portection enclosure for 32 Amp MCB DP complete all as specified and directed. Make : Legrand/ C&S/Siemens /Havells./Hager/Hensel

Supply and fixing plug and socket outlet (with industrial plug and socket ) with provision to mount MCBs 20 A including 20A SP MCB , C series , 1 module , IP 30 degree protection complete all as specified and directed . Make : Legrand/ C&S/Siemens / Havells./Hager/Hensel

Supply and fix in replacement VTPN DB 4-ways, IP 43 - IK 09 with metal door (DPX3 160+12) suitable for surface/flush mounting as per site requirement with copper bus bar, with neutral bar, earth bar and cable ties for cable arrangement, fully insulated bus bar and neutral bar, door earthing, corner shield for better protection, pan assembly confirming to IS 8623 including making fixing arrangement with existing wall all as specified. Make : Legrand / Siemen/Hager/C&S/ABB

Supply and fixing in replacement TPN DB , 4 Way (4+12 modules) double door , IP43 degree protection complete all as specified and directed. Make : Hager/ Legrand/ C&S/ ABB

Supply and fixing in replacement multipurpose 16 Amps combination PVC Gang box of size 7" x 4" including one switch and socket of 16 Amps complete all as specified and directed. Make : /Anchor/SSK/ABB/Kingel

Supply and fixing in replacement multipurpose 6 Amps combination PVC Gang box of suitable size including one switch and socket of 6 Amps complete all as specified and directed. Make : /Anchor/SSK/ABB/Kingel

Supply and fixing in replacement Switch modular type single pole one module, 6 Amps complete all as speciifed. Make : /Anchor/SSK/ABB/Kingel

Supply and fixing in replacement Switch modular type single pole one module, 16 Amps complete all as speciifed. Make : /Anchor/SSK/ABB/Kingel

Supply and fixing in replacement Socket outlet mdoular type, multipurpose, 2/3 pin, single pole two module, 6 Amps complete all as speciifed. Make : /Anchor/SSK/ABB/Kingel

Supply and fixing in replacement Socket outlet mdoular type, multipurpose, 2/3 pin, single pole two module, 6/16 Amps complete all as speciifed. Make : /Anchor/SSK/ABB/Kingel

Supply and fixing in replacement modular lumina plate and frame suitable for 3 module complete all as specified and directed. Make : /Anchor/SSK/ABB/Kingel

Supply and fixing in replacement modular lumina plate and frame suitable for 6 module complete all as specified and directed. Make : /Anchor/SSK/ABB/Kingel

Supply and fix in replacement VTPN DB 12-ways, IP 43 - IK 09 with metal door (DPX3 160+36) suitable for surface/flush mounting as per site requirement with copper bus bar, with neutral bar, earth bar and cable ties for cable arrangement, fully insulated bus bar and neutral bar, door earthing, corner shield for better protection, pan assembly confirming to IS 8623 including making fixing arrangement with existing wall complete all as specified and as directed. Make : Legrand / Siemen/Hager/C&S/ABB/Indoasian

Supply and fixing in replacement TPN DB , 6 Way (6+18 modules) double door , IP43 degree protection complete all as specified and directed. Make : Legrand / Siemen/Hager/C&S/ABB/Indoasian

Supply and fixing MCCB 160 Amps 4 pole 415 volts 25 kA Ics=75% Icu including extended terminals complete all as specified and as directed. Make : Legrand / Siemen/Hager/C&S/ABB

Supply and fixing MCCB 125 Amps 4 pole 415 volts 25 kA Ics=75% Icu including extended terminals complete all as specified and as directed. Make : Legrand / Siemen/Hager/C&S/ABB

Supply and fixing MCCB 100 Amps 3 pole 415 volts 25 kA Ics=75% Icu including extended terminals complete all as specified and as directed. Make: Legrand / Siemen/Hager/C&S/ABB

Supply and fixing MCCB 63 Amps 3 pole 415 volts 25 kA Ics=75% Icu including extended terminals complete all as specified and as directed. Make: Legrand / Siemen/Hager/C&S/ABB

Supply & fixing LED bollards light fitting integral decorative LED TULIP 9 Watts bollard with opal acrylic with IP 65 protection for warm white with including LED driver and taking down existing complete all as specified and directed.

Supply & fixing in replacement of LED post top Lantern type street light fitting and Taking down existing UNSV HPSV/CFL /UNSV / Post top lantern of different capacity from the pole complete all as specified and directed.

Earthing complete with galvanized iron or steel plate electrode 600mm X600mm X 6.0 mm burried directly in ground vertially in a pit of depth not less than 2.25m below normal ground level with top edge of the earth plate at a depth of not less than 1.50m below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to with and including galvanised earth lead wire 4.00 mm dia upto a length of 7.50 metre by means of bolts, nuts, check nuts & washers of galvanized iron /steel, earth strip protected by and including galvanized steel pipe medium grade of bore 15 mm (internal dia) & connected to main control board / switch board or any other electrical equipment complete all as shown in electrical plate No : 3 MES SSR including necessary excavation & earth work, disposal of surplus soil not exceeding 50m, in any type of soil. (The rate also includes for cost of charcoal & salt in alternate layers of 15 cm thickness, 20 mm bore internal dia GI/steel pipe medium grade for watering, funnel, wire mesh, PCC chamber in cement concrete (1:3:6) type C-1, 40mm thick RCC(1:2:4) type B-0, reinforced with XPM of weight not less than 4.00 kg/Sqm and mild steel frame of angle 50mmx50xxx6mm) and testing on competion including dismantling / taking out existing earthing and removing dismantling / taken out materials outside the defence land complete all as directed.

chahalbuilders

m/s krishna engineers1