Repairs and inclusion of slow speed movement system to EOT cranes having capacity of 15 Ton installed at 2 Corps Zonal Workshop at Patiala Mil Stn.

Amount

Supply and fixing of VDF Drive 7.5 HP for both long travel motors for slow speed. (Make L&T) Cat part no LTVF - F40016CAA

Supply and fixing of 9 Amp contactor for brakes. (Make L & T) Cat part no CS94833

Supply and fixing of braking resister 130 ohm 100 watts for brakes.

Supply and fixing of MCB 32 Amp TP for both 3 HP motors.

Complete wiring for VDF Drive, contactor, braking resister & MCB. (1 Sqmm wire 5 mtr, 1.5 Sqmm , 3 core wire 60 mtr)

Checking/tightening of nuts & bolts of couplings. Total no of couplings in each crane 4 Nos with 5 Nut bolts each

Setting right the alignment of long travel old rail after welding the joints for smooth running.

Providing and fixing of panel boxes CRC Powder coated with fan filter terminal and channel. ( 16 gauge sheet of size 450mm x 450 mm)

Dismantling of main shaft by opening the gear box and brakes , fixing the same after repair from workshop incl making of new key way with complete installation

Supply and fixing of 3 Pole Power Contactors - Type MO 40 Amp for main supply and taking out old burnt contactor Make: L&T Cat part CS94569

Supply and fixing of MS Ladder of length 7 mtrs approx. with size 65X65X6 mm and width of ladder 450mm with 40mm MS pipe for steps, fixing the ladder with ISMB by welding and on floor with bolts.

Testing of crane on load. Note: load for testing to be provided by the contractor.

Special Note for Sr no 01 to 04 1) Necessary test with valid load will conduct after rapair by contractor and load to be provided by contractor 2) Defect liability for material incorported in this Job is for one year and to be borne by contractor. 3) Retrived material will be the property of contractor as schedule of credit.

SANJEEV ENTERPRISES