REPLACEMENT OF FURNITURE AGAINST CONDEMNED ARTICLES UNDER GE AF LOHEGAON AT 9 BRD AF STN PUNE

Amount

CHAIR WRITING MAP (FD/E6/MAP/12) The frame of the chair shall be of MS tubular frame poowder coated, cantilever type of size 25 mm x 10 mm in section. Back form shall be designed with contoured lumber support for extra comfort. 120mm thick hot pressed plywood upholstered with superior quality fabric and moulded polyurethane foam with PVC lipping allround shall be provided at seat and back. PU arms shall be of superior quality and reinforced with MS insert. It shall be scratch and weather reesistant. Steel portion of chair shall be painted with two coats of synthetic enamel paint of black colour over a coat of primer. Rest all specifications are as per drawing and as directed by Engr-in-Charge.

COMPUTER CHAIR (FD/E6/MAP/01) The base pedestal assembly of chair computer shall be of dia 700mm and 1060mm high. The pedestal assembly shall be provided with injection moulded in black 30% glass filled nylon. A 10.5mm dia forged bright zinc plated MS castor pin is press fitted into each prong for holding the castors. The seat and back of the chair computer shall bemade of 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. The back form shall be designed with contour lumber support for extra comfort with PVC lipping all round. The back rest shall be adjustable and consist of drop lift mechanism and shall be adjusted in the insert. It shall be scratch and weather resistant. Handrest shall be black integral skin PU reinforced with MS insert. It shall be scratch and weather resistant. Rest all specifications are as per drawing and as per sample approved by GE.

TABLE CENTRE WITH GLASS TOP (FD - 375) Overall size shall be 1200 mm long, 600mm wide, 400mm high. Legs shall be of 40mm dia anodised brass legs, 4 in no in 1 piece. The legs shall be joined in short and long sides with two no 25mm dia brass pipes of wall thickness 2mm. The top pipe shall be fixed 150mm from top and the lower pipe shall be at 100mm from bottom of pipe. The brass frame shall be 900mm long and 450mm wide. Vacuum rubber should be provided at top of legs, which shall be closed with brass sheet 1.6mm thick.

CHAIR LEATHERETTE EXECUTIVE (MAKE - DURIAN UTRC/33206/HB OR EQUIVALENT) Black colour high back leatherette chair fixed arms centre tilt mechnism nylon base 660mm (W) x 520mm (D) x 1250mm (H)

M/s Green Leaf Electricals (BID ID -3136847)

Imprint Digitech (BID ID -3141464)

KASTURILAL HARICHAND OHRI AND SONS (BID ID -3133707)