8431CERTAIN B/R AND E/M SPECIAL REPAIRS WORK OF AT HQ EW BDE AND AIPT AREA UNDER AGE B/R-II AND AGE E/M GE (CENTRAL) PUNE

Amount

Taking down chowkats or frames with shutters (withoou taking off shutter from the frame) area not exc 1.50 Sqm each & removing from site complete all as directed.

Taking down chowkats or frames with shutters (withoout taking off shutter from the frame) area exc 1.50 Sqm but not exc 4.00 Sqm each & removing from site complete all as directed.

S & F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg given on page 176 of SSR 2020 Part II The width of stiles and rails shall be as specified in para 8B.2.1 on page 145 of SSR 2020 part II. complete all as specified and directed.

S & F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in sketch on page 180 of SSR 2004 Part-II complete all as specified and directed.

S & F three track sliding window with two or more shutte with including one with 4.00mm thick tinted sheet glass and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352. (Note :- Glass pane & Stainless steel wire cloth shall deemed to be included in quoted rates.)

S & F louvers glass ventillators with partially guaged shutter using 5mm thick x 10cm wide frosted glass strips with following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading and all necessary fittings as required etc complete all as specified and as directed. (a) SP 20048 (b) Glazing clips 19352

S & F 150mm extruded aluminium alloy powder coated handles , fabricated type complete all as specified and directed.

S & F 150mm long Aluminium anodised powder coated barrel tower bolt of extruded section complete all as specified and directed.

S & F 100mm stainless steel butt hinges medium weight complete all as specified and directed.

Supply & Fix 250mm long Aluminium alloy powder coated sliding door bolts with hasp and stapple (bolt type and fxing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

S & F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, door chowkats of angle or other section and similar works complete of Grade Fe-290 Grade E-165 including welding etc complete all as specified and directed.

M & L preparation of new or previously untreated steel surfaces of any description over 10cm width or girth not otherwise described over applying two coats of synthetic enamel paint over a coat of a red oxide zinc primer complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and at any position not otherwise specifically provided and removing debris out side of defence land complete all as as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing debris out side of defence land complete all as as directed.

M & L 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregates as in plinth protection finished the surfaces even and smooth without using extra cement including use & waste of necessary form work complete all as specified & directed.

M & L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregates as in levelling course complete all as specified and as directed.

Material and labour for Non skid coloured ceramic tiles of size 400mm x 400mm x 7 to 8mm thick, (Square / rectangular) over & including 15mm thick screed bed in CM 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified and directed.

M & L for colored glazed ceramic tiles of size 300mm x 600mm x 8 to 9mm thick (Matt Finish) on vertical surfaces set and jointed in neat cement slurry and pointed in white or colored cement to match including 10 mm thick backing coat in cement mortar 1:4 on brickwork or stone masonary surfaces complete all as specified and directed.

Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc including cement mortar bedding and removing debris out side of defence land complete all as as directed.

M & L 20mm thick granite (of any type) work table rubbed and polished in steps, jambs, pillars, window cills, cooking platforms, floor / skirting / risers or as in vertical support or counter top for wash basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite over and including 15 mm thick screed layer in CM 1:3 with edges polished / rounded as ordered incuding cutting circular or eliptical hole in granite slab and fixing in position complete and ensure best adhesion to surface complete all as specified and as directed.

M & L for 20-25mm thick machine cut cudappah stone slab for vertical supports of kitchen platforms / WHB Counter, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding , rubbing and polishing of the exposed face complete all as specified and directed .

Removing of existing old bitumenous tarfelt (water proofing treatment) including cement screed bed and clean the surface with wire brush and washing with water to achieve the original surface of slab complete all as directed .

M & L water proofing treatment to RCC roof slab, walls, chhajjas ets, shall be carried out as specified below : - (a) M & L for 10mm hick plaster screed bed layer in CM 1:3 on concrete surfaces by using liquid Water proofing chemicals @ 200 ml per bag of cement. (b) Preparing plastered surfaces of roof slab, walls, chhajjas etc, by brooming with broom sweeping free from dirt dust etc & evenly applying a coat of approved bitumnous primer @ 0.70 Kg per Sqm of area of density at 25 degree Centigrade 0.87-0.89 Kg/Litre and viscosity 70-160 cps or cold sticker complete all as specified. (c) Laying App polymer modified approved membrane, non woven, polyester, weighing not less than 3.5 kg/Sqm and 3mm thick with laps & overlaps as specified & joints sealed and applied complete by torch application method all as specified & directed by Engr-in-Charge. Carrying out test by flooding water for 24 hrs for leakagge & seepages and rectifying the same to the entire satisfaction of GE. (d) Applying one coat bitumen grade 85/25 @ 1.20 Kg/Sqm (e) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 Ltr/Sqm on the top of membrane surfaces complete all as specified and as directed by Engineer-in-charge.

Taking down cement plaster on lathing (other than wire netting) without removing lathing complete all as directed . (Note : one side plaster only measured in cases where both sides are plastered)

M & L rendering 15mm thick in CM 1:6o n stone masonry surfaces or other than fair faces of brick work or stone surfaces finished the surfaces even & smooth with a thin layer of sagol finish complete all as specified and directed .

M & L for rendering 15mm thick in cement mortar 1:4 on brick / stone surfaces finished the surface even & smooth with spong finish complete all as specified and directed .

M & L for rendering 10mm thick in CM 1:3 as in ceiling inclusive fixing of Gl wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists etc in walls , ceilings, stanchions, beams etc including all laps, cutting and waste complete all as specified and directed .

M & L for preparation newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed .

M & L for preparation of newly plastered surface wall and applying three coats of white wash complete all as specified and directed.

M & L for preparation of newly plastered surface wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M & L for preparation of old plastered or unplastered surfaces of wall by brooming / wire brushing / removal of loose scales / dusts / unwanted particles manually / mechaincally and applying one coat of white wash complete all as specified and directed.

All as per item No 31 above but in ceiling complete all as specified and directed.

M & L for preparation of old plastered or unplastered surfaces of wall by brooming / wire brushing / removal of loose scales / dusts / unwanted particles manually / mechaincal and applying one coat of cement based paint omplete all as specified and directed.

M & L for GI tubing 15mm bore dia medium grade including all fittings such as bend, elbow, union, tee, short pieces etc fixed to walls, ceilings or laid in floors including taking up or down old steel water tubing and connections complete all as specified and directed.

M & L for GI tubing 20mm bore dia medium grade including all fittings such as bend, elbow, union, tee, short pieces etc fixed to walls, ceilings or laid in floors including taking up or down old steel water tubing and connections complete all as specified and directed.

S & F 1000 Litres capacity Rotational moulded polyethelene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position including all necessary GI fittings such as nipple, union / sockets etc and connecting up pipes etc including dismantling existing water tanks complete all as specified and directed.

S & F in repair vitreous China wash down water closet (pedestal pattern), white with including cast iron 'P' or 'S' trap and connection to trap , fixing bolts, seat cover & Jet spray (excluding flushing cistern and flush pipe) complete connected to drain complete all as specified and directed.

S & F in repairs 15mm , bib taps , cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as directed and specified.

S & F in repairs 15mm , angle cock , cast copper alloy , fancy type , chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repairs 15mm stop valve , Long shank concealed type, fancy type , chromium plated , cast copper alloy with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repair 125mm size brass chromium plated shower rose with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S & F in repairs 15mm dia PVC connections with PTMT nuts , length 450mm all as specified and directed.

Supply and fix in repairs 15mm pillar taps of cast copper with capstan head, chromium plated, fancy type, screwed down high pressure with or without lettered 'hot' and 'cold' with long screwed shank and fly nut for iron pipe complete all as specified and directed.

S & F in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed.

Supply and fix in repair 20mm bore PVC brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as all as specified and directed.

S & F in repair 20mm dia gun metal, globe or gate valves ISI marked with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F in repair counter top self rimming aquarious white wash hand basin of size 550 x 430 x 195mm with including waste coupling full threaded and including brackets and waste pipe complete all as specified and directed. Make of WHB : Parryware Cat Part No C0466 (SP) and make of waste coupling : Cat Part No T9911A1 or equivalent make of Prayag or as given in Appx 'A'.

S & F in repairs Soap dish, Stainless steel or Chromium plated, fixed to plugs with chromium plated brass screws all as specified and directed.

S & F in repairs 20mm dia Brass, Chromium plated, Tubular towel rail, , D type, 60cm long between flanges complete all as specified and directed.

S & F in repair 100mm dia brass chromium plated grating dooms with or without holes (minimum weight 50gms) complete all as specified and as directed.

Dismantling CI work of any description and any position all as directed.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall or laid in floors / in trenches complete all as specified and directed.

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall or laid in floors / in trenches complete all as specified and directed.

S & F 110mm PVC (SWR) any radius, diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed.

S & F 75mm PVC (SWR) any radius, diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed.

S & F 110mm bore dia PVC (SWR) Branch pieces, double (double 'Y') equal or unequal with door access complete all as specified and as directed.

S & F 75mm bore dia PVC (SWR) Branch pieces double (double 'Y') equal or unequal with door access complete all as specified and as directed.

S & F 75mm bore dia PVC (SWR) Nahani trap with SS grating with or without holes incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S & F PVC (SWR) gully trap 150 x 100mm square or round mouthed, type P including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S & F 110mm bore dia PVC (SWR) vent cowl complete all as specified and directed .

S & F 75mm bore dia PVC (SWR) vent cowl complete all as specified and directed .

S & F 110mm bore PVC (SWR) junction double, (double T), equal or unequal with access door complete all as specified and directed.

S & F 110mm bore dia PVC (SWR) Coupler complete all as directed .

S & F 75mm bore dia PVC (SWR) Coupler complete all as directed .

M & L for precast cement concrete block masonry exceeding 10cm in width witth solid blocks of PCC (1:5:8) grade D-5 and set in in CM 1:6 including dismantling of old brickwork or stone / boulder / PCC block masonry built in cement mortar including all quoins, arches, pillars etc, complete all as specified and as directed.

M & L for PCC 1:2:4, type B-1 using 20mm graded stone aggregates as in lintels upto 1.5 Metre clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

Taking down old unserviceable point wiring (light/fan/socket/power) complete including fixtures and fittings such as switches, sockets, ceiling roses, pendants, regulators etc and making good the distrubed surfaces of walls, floors, ceiling etc complete all as directed.

Taking down main switches / DBs etc complete and making good the disturbed surfaces complete all as directed.

Taking down Ceiling fan of any sweep, keeping with safe custody , replacement of unserviceable 3 core PVC insulated, PVC sheated 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal , overhauling the fans complete , replace the capacitor , rubber coupling , bearing etc of suitable size, painting of fans complete with synthetic enamel paint by spray painting including filling cavities with filler one coat after cleaning all dust etc and and refixing the same to its original position in servicable conditions complete all as specified.

M & L for point wiring of any length using approved colour coding as per IS with stranded copper conductor 1.5 Sqmm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS H cable 1100 Volts grade, ISI - 694 marked, dwawn through non metalic PVC rigid conduits of suitable size heavy duty ISI marked totally concealed in wall / floor / roof including all accessories etc. with Modular sunken boxes including modular frame / cover plate suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified and directed for the following :- Note :- (i) Cutting in chases and pointing in will be done by contractor without any extra cost. Rates quoted by the contractor shall deemed to be included of above provision. (ii) Making good of distrubed surfaces matching with existing finishes will be done by contractor without any extra cost.

(a) One light point controlled by one, one way switch complete all as specified and directed.

(b) One Exhaust fan point controlled by one 5 Amps one way modular switch complete all as specified and directed.

(c) One 5/6 Amps socket controlled by one, one switch same board complete all as specified and directed.

(d) One 3 pin 5 Amps sockets oulet point controlled by one, one way switch on independent board completeall as specified and directed.

All as per item No 71 above but with 2.5 Sqmm (nominal area) single core PVC insulated and unsheathed multistranded FRLS H cable 1100 Volts grade, ISI-694 marked including PVC insulated multistranded copper conductor 2.5 Sqmm single core cable for earth continuity conductor for one 3 pin 5/15 Amps switch socket / Earth plug socket independent and connecting to common earth dolly complete all as specified and directed.

M & L for point wiring of any length using approved colour coding as per IS with stranded copper conductor 1.5 Sqmm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS H cable 1100 Volts grade, ISI - 694 marked, dwawn through PVC casing & caping of 25mm size ISI marked totally concealed in wall / floor / roof including all accessories etc. with Modular sunken boxes including modular frame / cover plate suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified and directed for the following :- Note :- (i) Making good of distrubed surfaces matching with existing finishes will be done by contractor without any extra cost.

(a) One light point controlled by one, one way switch complete all as specified and directed.

(b) One fan point controlled by one 5 Amps one way modular switch complete all as specified and directed.

(c) One 3 pin 5 Amps sockets oulet point controlled by one, one switch same board complete all as specified and directed.

(d) One 3 pin 5 Amps sockets oulet point controlled by one, one way switch on independent board completeall as specified and directed.

(a) One light point controlled by two, two way switch complete all as specified and directed.

All as per item No 73 above but with 2.5 Sqmm (nominal area) single core PVC insulated and unsheathed multistranded FRLS H cable 1100 Volts grade, ISI-694 marked including PVC insulated multistranded copper conductor 2.5 Sqmm single core cable for earth continuity conductor for one 3 pin 15 Amps socket on independent and connecting to common earth dolly complete all as specified and directed.

S & F modular switch, piano, flush type, single pole, one way, 5/6 Amps complete all as specified and as diretced.

S & F modular socket, outlet , 5/6 Amps, 5 pin flush type, single pole, one way complete all as specified and as directed.

S & F modular socket 2 in 1, 5 pin 6/16 Amps, flush type complete all as specified and as directed.

S & F modular switch, piano ,flush type, single pole, one way, 15/16 Amps complete all as specified and as directed.

S & F modular switch, piano, flush type, single pole, two way, 6 Amps complete all as specified and as diretced.

S & F modular socket, outlet , 2/3 pin , 6 Amps, multipurpose, 2 modules, 230 Volts, single pole, one way suitable for plug top complete all as specified and as directed.

S & F modular socket, outlet , 2/3 pin , 16 Amps, multipurpose, 2 modules, 230 Volts, single pole, one way suitable for plug top complete all as specified and as directed.

S & F ceiling rose, surface bakelite type 65 x 50mm two to three terminals complete all as specified and as directed.

S & F in repairs modular fan regulator , stepped type (5 steps) , two module 230 Volt , 50 HZ , AC supply complete all as specified and as directed.

S & F in replacement LED Security light fitting 30 Watt LED, wall mounting internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size with including GI pipe brackets made out of 40mm bore dia of length upto 1.50 Metre including fixing aarangements and with fixing accessories i.e clamps, nut, bolts etc complete all as specified and directed.

Suuply and fix in replacement LED Tube light fittings Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with industrial grade heavy duty driver 20 Watt LED complete including all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector complete all as specified and directed.

Supply and fix in replacement LED light fitting mirror type with high output diffuser 2 feet, 10 Watt, 220 Volt, AC decorative type with driver, holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F in replacement of LED light fitting surface and wall mounted LED batten with aluminium housing & integrated electronic driver complete in all respect of 10 Watt capacitycomplete all as specified and directed.

S & F in replacement LED security light of luminaires 25 Watt LED , wall mounting with including all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size including necessary bracket made out of 40mm bore dia GI pipe light grade 0.6 to 0.9 metre long bend to required shape with clamps, nut, bolts complete all as specified and as directed.

M & L for sub main wiring complete with two single core 4 Sqmm 1100 Volts grade PVC insulated stranded copper conductor FRLS H cable with continuous copper earth conductor of 4 Sqmm in and including non metallic PVC conduit of suitable size including all accessories including taking down old unserviceable / worn out sub main wiring of any type and size complete all as specified and directed. Note :- (i) Making good of disturbed surfaces wiil be done by contractor without any extra cost. (ii) 2 Runs of 4 Sqmm conductor , one run of 4 Sqmm earth conductor and one run of PVC conduit shall be measured as one unit length.

M & L for sub main wiring complete with two single core 6 Sqmm 1100 Volts grade PVC insulated stranded copper conductor FRLS H cable with continuous copper earth conductor of 6 Sqmm in and including non metallic PVC conduit of suitable size including all accessories including taking down old unserviceable / worn out sub main wiring of any type and size complete all as specified and directed. Note :- (i) Making good of disturbed surfaces wiil be done by contractor without any extra cost. (ii) 2 Runs of 6 Sqmm conductor , one run of 6 Sqmm earth conductor and one run of PVC conduit shall be measured as one unit length.

Supply, laying, testing & commissioning of LT cable XLPE insulated armoured heavy duty electric cable including with necessary cable glands, lugs etc laid in trenches / poles / walls , passing through pipes etc ISI Marked (1100 Volt grade) with multistranded aluminiuim conductor, cross sectional area 10 Sqmm 4 Core including taking down old unserviceable / worn out LT UG Cables of any type and size complete all as specified.

Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with including one MCB SP 20 Amps complete all as specified and directed .

S & F MCB SPN DB, 8 way, double door, IP-43 made out of sheet steel phosphatised, powder coated with 200 Amps rated bus bar, neutral link, earth bar and din rail, 230 Volts complete all as specified and as directed.

S & F of vertical type of MCCB DB, TPN, 4 way, double door IP-43 made of steel phosphatised, powder coated with 200 Amps rated bus bar, neutral link, earth bar and din rail, 415 Volts complete all as specified and as directed.

S & F MCB single pole rated capacity 5 to 32 Amps, 240 Volt , breaking capacity 10 KA, B-curve complete all as specified and as directed.

S & F MCB single pole & neutral rated capacity 32 Amps, 240 Volt , breaking capacity 10 KA, B-curve complete all as specified and as directed.

S & F MCB single pole rated capacity 6 to 32 Amps, 240 Volt , breaking capacity 10 KA, C-curve complete all as specified and as directed.

S & F MCB double pole rated capacity 40 Amps, 240 Volt , breaking capacity 10 KA, C-curve complete all as specified and as directed.

S & F MCCB TPN, 4 Pole, 100 Amps , thermal type with breaking capacity 16 KA 'B' curve 415 Volts complete all as specified.

M & L in replacement earthing with galvanised steel earth plate electrode 60cm x 60cm x 6.3mm buried directly in ground earth pit not less than 2.25 Mtr deep below normal ground level with top edge of the plate vertically to depth of not less than 1.5 Mtr below ground level connected to and including GI wire 4mm dia and including GI pipe 15mm bore dia light grade for protection upto the extent of 7.5 Mtr as earthing lead by means of GI bolts and nuts etc connecting to equiment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Part-I including RCC cover and MS angle iron frame, watering arrangement with GI pipe 20mm bore dia light grade and MS funnel , concrete pit including necessary excavation and earth work in any type of soil and testing on completion etc complete (Note : GI earth wire and 15mm bore dia GI protection pipe light grade upto 7.5 Mtr from earth plate is deemed to be included in quoted rate.)

Taking down of existing ceiling fan of any size and sweep, sealing cable end, dismantling blades and deposit to MES store yard of AGE E/M complete all as directed. Note :- Necessary RV be obtained after depositing of ceiling fan .

Supply and Fix ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 Volts, 1200mm sweep. Min air deliver 210 CFM. Five star rated with brushless direct current motor (BLDC) complete including connection with three core flexible copper conductor of suitable size from ceiling rose to fan with complete all as specified and as directed . Make : Bajaj / Crompton / Havells / Khaitan / Orient / V-Guard

Aishwarya Constructions

SHREESAMARTH CONSTRUCTION

R K CONSTRUCTION AND ENGINEERING

M/S NAVNEET S MORDE

GS Associates

M/s.BAJRANG CONSTRUCTION

K.K.Enterprises

M/s Asrani and sons

ANIL CONSTRUCTION CO.