COMPREHENSIVE REPAIR TO GATES DOORS AT MIL STN DAPPAR

Amount

Dismantling of brick work of any description built in cement mortar and in any position not otherwise specifically provided for complete all as specified and directed .

Material and Labour for Brick work using sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed

Demolition of cement concrete of any description and in any position not otherwise specifically provided as specified and directed

Material and Labour for plain cement concrete of nominal mix M-20 of ratio 1:1.5:3 using 20mm stone aggregate as specified and directed

Material and Labour forming expansion joint 12mm thick filled with preformed bituminous filler and tip 30mm primed and sealed with sealing compound grade 'B' for concrete slab of 100mm thick all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided as specified and directed

Material and Labour for Reinforced cement concrete (nominal mix ) type B-0 1:2:4 using 20mm graded stone aggregate in chajjas as Specified and directed

Material and Labour for Reinforced cement concrete (nominal mix ) type B-0 1:2:4 20mm graded stone aggregate in walls, retaining walls, basements walls, ballast walls and the like, any thickness ; above top of footings including attached pillaster and butttresses as specified and directed

Material and Labour for Reinforced cement concrete (nominal mix ) type B-0 1:2:4 20mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies , canopies, deck slabs and in shelves and the like all as specified and directed

Material and Labour for formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses etc, vertical or to batter as specified and directed

Material and Labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work as specified and directed

Material and Labour for formwork to chullah hoods, chajjas, troughs and similar item including edges as specified and directed

Material and Labour Mild steel TMT bar 10mm dia and over, cut to length, bent to shape as required including cranking bending spirally for hooping for column, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9mm dia or securing with clips complete all as specified and directed

Material and Labour Mild steel TMT bar 5 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders, cut to length, bent to shape required including cranking bending spirally hooping for column, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9mm dia or securing with clips quality conforming to, as in stirrups, spaces and binders complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron or flat iron as in post and guard bar or grating complete all as specified and directed

Supply and Fixing Framed work such as grills, gratings etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors; ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed

Supply and Fixing Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members n exc 4sqm /kg complete all as specified and directed

Preparation of newly or previously untreated steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed

Material and Labour for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 coarse sand) furrowing the under layer with scratching tool , applying cement slurry on the under layer @ 3 kg of cement per square meter, top layer 15 mm cement plaster 1:1/2:2 (1 cement : 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified.

Material and Labour for preparation of newly plastered surface and applying two coat of Acrylic Smooth exterior paint of required shade (Camouflage) applied as per manufacturer's instructions over a coat of exterior wall primer complete all as specified and directed

Material and Labour for cement plastering 10mm thick in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and Labour for cement plastering 5mm thick in cement mortar 1:3 as on ceilings, concrete surfaces, RCC Surface finished even and smooth without using extra cement complete all as specified and directed.

Material and Labour for cement plastering 15mm thick in cement mortar 1:4 on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and fair mixing with liquid WPC as per manufacturer's instructions complete all as specified and as directed

Material and Labour for preparation of new plastered surfaces of wall and applying two coats of Oil bound distemper over one coat of chalk whiting over a coat of primer complete all as specified and directed

Material and Labour for preparation of newely plaster surfaces on wall and applying two coats of cement based paint on external plastered surfaces over a coat of primer all as specified and directed

Material and Labour for preparation of newely plaster surfaces of ceiling, concrete surface or RCC surface and applying three coats of white wash complete all as specified and directed

Supply only integral liquid water proofing compound complete all as specified and directed.

Material and Labour for removal of existing gate of Mags/ iron gates of any size by means of machinery and crane and refitted after repair i.e greasing, oiling and welding etc the same in same opening complete all as specified and as directed. Note: All T&P will be provided by contractor.

Material and Labour for greasing and oiling gate of Mags/rolling shutters of any size by means of macnine complete all as specified and as directed.

Supply and Fixing for steel Rolling shutters of 1mm thickness, with out ball bearing, as specified including top cover and spring to pull up, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete, push pull or manual type complete all as specified and as directed

Supply and Fixing safety lever locks mild steel with 4 levers for rolling shutter as per existing size and make all as specified and directed

Supply and Fixing ball bearing for rolling shutters as per existing size and make all as specified and directed

Supply and Fixing MS pipe of 100 mm dia as shaft including two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed

Neelkanth Engineers (BID ID -3219056)

power house batteries (BID ID -3212063)