REPAIR TO INTERNAL PERIODICAL JOINERY SHAFT REPAIR FLOORING TANK CLEANING PLASTERING PLUMBING SANITARY AND OTHER MISC BR WORKS IN JCOS ORS MD ACCN AT CHERRING ENCLAVE UNDER AOR OF AGE BR I OF GE NORTH DELHI CANTT 10

Amount

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down door shutters of any description exc 1 Sqm & n.exc 2 Sqm each complete all as specified and directed

Demolition of reinforced cement concrete (Reinforcement cut as required to facilatate demolition) of any description and in any position not otherwise specially provided

Demolition of plain cement concrete (unreinforced) of any thickness of any description and in any position not specifically provided for complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick joint free area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors over and incluidng 15mm thick screed bed or bedding layer in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement including dismantling floor, hearth or wall tiling including cement mortar bedding and also backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

All as the the description of srl item No 06 above but in vertical surface as skirting, dado and risers to steps over and including10mm thick rendering/backing coat in cement mortar 1:4 etc.

M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement. including dismantling floor, hearth or wall tiling including cement mortar bedding and also backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L glazed ceramic coloured tiles as in vertical surface area of each tile between 0.06 to 0.15 Sqm each, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering 10mm thick in CM 1:4 and finished rough, complete including dismantling floor, hearth or wall tiling including cement mortar bedding and also backing, removing serviceable tiles to store and rubbish off the premises all as specified & directed. Note - Tiling work is to be done in patches, forming hole where required over making good wall surface.

M&L 20 to 25mm thick pre-polished machine cut kota stone slab including dismantling as in flooring over and including 15mm thick screed bed in cement mortar 1:6, laid over cement slurry @ 3 Kg/Sqm and jointed with grey cement slurry mixed with pigment to match with shade of slab including moulding the edge of slab complete all as specified and as directed.

M&L 20 to 25mm thick pre-polished machine cut kota stone slab including dismantling as in riser or vertical surface over and including 10mm thick rendering in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match with shade of slab including moulding the edge where as specified and as directed.

M&L for machine cut makrana green/white marble 18 to 20mm thick as in flooring as in border in any pattern including dismantling over 15mm cement screed bed or bedding layer in cement mortar 1:6 jointed and pointed with white cement slurry including mirror polishing/diamond polishing using carborandum stone of 0 unit including rubbing & treating the surface complete all as specified and directed

M&L for reinforced cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate in chajjas complete (reinforcement to be measured separately).

M&L reinforced cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. Note:- The reinforcement shall be measured and paidseparately.

Mild steel TMT bars 6 to 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Formwork to sides and soffits of slabs n. exc. 200mm thick and similar works rough finished surfaces of concrete complete all as specified and directed.

Use and waste of formwork to chullah hoods, chajjas, throughs and similar items including edges.

M&L for brick work with subclass 'B' brick straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete including demolition of brick work at any position complete all as specified and directed.

Taking down existing cement plaster or grit finished or complete removal of existing pointing and finishes including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:4 on faces of brick work or concrete external surfaces of wall finished even and smooth without using extra cement all as specified and directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 coarse stone dust) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) white cement in place of ordinary cement to be used in the work, panels with groove all around as per approved pattern or design and colour including scrubbing and washing the top layer with brushes and water to expose the stone chippings complete all as specified Note:- The payment for providing grooves shall be measured and paid separately.

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nails to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction.

M&L 15mm thick rendering in cement mortar 1:6 on faces of brick work or concrete internal surfaces of wall finished with using luquied Water proofing compound @ 200ml/50kg of cement even and smooth without using extra cement all as specified and directed.

M&L 5mm thick rendering in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even and smooth complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparing old decorated plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for preparing new plastered surfaces of wall and applying two coats of oil bound distemper white or tinted over and including a coat of 2mm wall care putty on plastered surfaces preparatory to distempering complete all as specified and directed.

M&L for existing treatment complete removal from wall and preparing old decorated surfaces of wall and applying two coats of oil bound distemper over a coat of 1mm wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coat of cement based paint over a coat of cement primer all as sepcified and directed

M&L for complete removal of existing treatment of wall including cornices etc. by washing, rubbing down and stopping holes, and applying two coats of cement base paint over one coat of primer of approved shade complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided all as specified and directed

S&F for steel gate made of mild steel section, grill work including holdfast, 2x MS hinges, stoppers, bushes, and all as CI decorative pieces, locking arrangement etc complete all as specified and directed.

Supply and laying of 20mm outer dia of CPVC pipe SDR 11 and plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete including brass CPVC fittings (i.e elbow, Tee, MTA/MBTA,FTA/FBTA, Tank adaptor, Union, etc suitable for 15mm bore bath fittings). Note- length of pipe with fittings to be measured for payment, no extra payment should be made for fittings.

Supply and laying of 25mm outer dia of CPVC pipe SDR 11 and plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete including brass CPVC fittings (i.e elbow, Tee, MTA/MBTA,FTA/FBTA, Tank adaptor, Union, etc). Note- length of pipe with fittings to be measured for payment, no extra payment should be made for fittings.

S&F steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F Steel water tubes, medium grade, ISI marked, galvanised, 20mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

All as per the description of srl item No 35 above but except GI tubing.

All as per the description of srl item No 36 above but except GI tubing.

S&F rotational moulded polyethylene water storage tanks (cylindrical/rectengular transparant type with closed top) of 200 litres capacity, ISI marked, double layered hoisted and fixed in position including connecting up pipes with fittings including dismantling of existing water tanks complete all as specified and directed.

S&F in repairs 20mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs float valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic wall, screwed for iron pipe and fixed for 20mm bore size (Minimum weight 210gms), complete all as specified and directed.

Cutting chases in brick walls, pinning in, making good any thickness up to wall tile to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubings etc and making good, cutting exceeding 20cm girth complete all as specified and directed.

S&F in repairs brass CP mixer for mixing hot & cold water screwed down high pressure, with long screwed shanks and fly nuts, screwed for pipe 15mm bore with nozel pipes and all fittings complete all as specified and directed.

S&F in repairs wall mixer with provn for over head showers with 115mm long bend pipe on upper side connecting legs and wall flanges all as specified and directed.

S&F in repairs sink wall mixer for sink including legs and wall flanges and all necessary fittings make it functional all as specified and directed.

Labour for repair work to all broken/demaged existing plumbing pipes, fittings, MS clamp/bracket, RCC Jali, MS ring/foot rest etc erected in shaft/duct upto 9 storey bldg with using safety belt or jhula work, complete all as specified and directed Note:- The new items/materials required during repair work shall be measured and paid separately under respective items of BOQ

Supply only PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or in floor 75mm bore complete.

Supply only 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints f complete.

Supply only PVC (SWR) bends any radius, 75mm bore, complete all as specified and directed.

Supply only PVC (SWR) bends with access door any radius, 75mm bore, complete all as specified and directed.

Supply only PVC (SWR) bends any radius, 110mm bore, complete all as specified and directed.

Supply only PVC (SWR) bends with access door any radius, 110mm bore, complete all as specified and directed.

Supply only PVC (SWR) junction single (single T), equal or unequal, 75mm bore, complete all as specified and directed.

Supply only PVC (SWR) junction single (single T), equal or unequal, with access door 75mm bore, complete all as specified and directed.

Supply only PVC (SWR) junction single (single T), equal or unequal, 110mm bore, complete all as specified and directed.

Supply only PVC (SWR) junction single (double T), equal or unequal, with access door 110mm bore, complete all as specified and directed.

Supply only PVC (SWR) branch piece, double (double Y) equal or unequal of 110mm bore complete all as specified and directed.

Supply only PVC (SWR) vent cowl, 75mm bore complete all as specified and directed.

M&L for precast reinforced cement concrete jallies 30 to 45mm thick including all mouldings 1:2:4 type B-0 (12.5mm graded crushed stone aggreagte) set in cement mortar 1:4 including taking down old RCC Jallies complete all as specified and directed.

S&F in repairs stainless steel plate rack (utensil rack) of size (600mm x 750mm) and depth 300mm made with 0.55mm thick stainless steel sheet provided with brass screw including necessary fittings, nut/bolts complete all as specified and directed.

S&F in repairs soap dish disc (oval) type, mild steel chromium plated of approximate size 100mm x 50mm x 10mm, complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass self 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repairs 75mm PVC (SWR) floor trap, plain with grating doom including jointing with solvent cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate mix with WPC complete all as specified and as directed.

S&F in repairs stainless steel sink with drainage board, made out of 1.00mm thick sheet with plug, washers, waste pipe, cast iron cantilever brackets, connecting union over all size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs tubular towel rail of brass chromium plated, 20mm dia, 'D' type, 60 cm long between flanges complete all as specified and directed.

S&F in repairs stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed.

S&F in repairs bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed.

S&F 32mm dia bore low density polyethylene pipes (LDPE) of pressure rating 6kgf/cm2 fixed complete to walls,ceilings or in floors etc for WHB and sink complete all as specified and directed.

S&F in repairs brass chromium plated shower rose 65 to 90mm size with swivel joints, wall flange complete all as specified and directed.

S&F in repairs 10 litre capacity PVC low level flushing cistern ‘ white’ with inlet, float valve including bracket with 32mm dia PVC waste/flush bend pipe appx 600mm long complete all as specified and directed.

S&F in repairs PVC connection 600mm long and15mm dia with brass fly nut at both ends complete all as specified and directed.

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, of size 580mm x 440mm white with integral foot rest complete including provn of cement concrete bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe etc complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) including trap, white including fixing bolts, flushing cistern and flush pipe connection to trap and to flushing pipe in bend cluding provn of cement concrete beading complete all as specified and directed.

S&F vitreous china wash hand basin white, flat back of size 550mm x 400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32mm dia PVC waste pipe including fixing of tap, waste fitting etc complete all as specified and directed.

S&F in repairs chromium plated brass angle valve concealed type for 15mm bore pipe, fixed in repairs complete all as specified and directed.

S&F in repairs EWC seat cover black/white colour as approved of PVC closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repairs CP Jet for 15mm dia with pipe chromium plated 1.25m long flexible tube and complete all as specified and directed.

S&F fibre glass reinforced plastic (FRP) door frames shall be of cross section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness. The laminate door frame moulded with fire retardant grade unsaturated polyester resin and chopped mat. Door frame moulded with fire retardant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs, The frame shall be covered with fiber glass from all sides. MS Stay shall be provided at the bottom to steady the frame all as specified and directed.

S&F FRP door shutter shall be 30mm thick glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacturers. Made with fire retardant grade unsaturated polyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP panels and confirming to IS-14856-2000 complete all as specified and directed.

S&F in repairs solar reflective sheet glass, 5 to 6mm thick and glazing with aluminium glazing clip, rubber gasket etc in aluminium window any type in square complete all as specified and directed.

S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm, fixed with stainless steel wire staples beads, tinned tacks to steel windows and wooden doors shutters complete all as specified and directed.

S&F in repairs stainless steel, wire cloth 0.56mm nominal dia of wire, and average width of aperature 1.18mm and fixed to steel or wooden window or doors with necessary fixing arrangement complete all as specified and directed.

S&F flush shutters 30-35mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides with leaping and beading complete all as specified and directed.

S&F mild steel conforming to Fe 410-0 or Fe 310-0 in framed work such as grills, gratings, door frame etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete all as specified and directed.

S&F for mild steel, plain, black sheet of 1.60mm thick in wall cladding steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up mitred angles etc as required

S&F plate girder or single stanchions, Fe-410-W (Gde-E-250) built up of one beam or channel section with flange plates, caps bases. Splices, angle brackets cleats and other connections

Rolled mild steel sections conforming to Gde Fe-410-0 or Fe-310-0 as in guard bars, railing, support, steps and similar work complete all as specified and directed.

M&L for running welding in repairs thickness of metal exc 6mm but n exc 9mm to be welded complete all as specified and directed.

Taking down/dismantling old particle board or any board kitchen cabinet with wardrobe including fillets and making good disturbed surfaces all assessary complete all as specified and directed.

S&F 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupboard, kitchen cabinet etc all as specified and directed

Extra over rates of width 18/19mm of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails complete all as specified and directed.

S&F 2nd class hard wood plain fillets square, rectangular or triangular in section of size exc 13 and n exc 25 Sqcm , wrought, secured with nails or brads to wall, column etc complete all as specified and directed.

S&F magnetic catches with steel body ‘H’ type, fixed to shutter complete all as specified and directed.

S&F in repairs telescope basket/drawar (channel) 18/25 inch length extruded MS galvanised over rollers of approved make

S&F continuous (piano) hinges of width 30mm when open flap), mild steel, bright finish or electro galvanised

S&F floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140mm complete all as specified and directed.

S&F 100mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 4 levers brass cupboard locks grade-I, size 65mm complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F butt hinges, 100mm size medium weight, cold rolled mild steel complete

S&F aluminium handles 150mm size cast type, anodised complete all as specified and directed.

S&F 300mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed.

S&F stainless steel chromium plated tubing of 25mm dia curtain rod fancy type including fancy type CP brabs brackets (wall to wall or flush to wall) with finials or end caps decorative type as approved by GE for securing to curtain rod to wall in position, fixed in repairs complete all as specified and directed.

M&L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed.

M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed.

M&L for two coats of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10cm width or girth complete all as specified and directed.

M&L for two coats of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10cm width or girth complete all as specified and directed.

Removing of existing water proofing membrane, damage plaster, vegitation/plants, PCC, mud fuska, brick tile, tar-felt, loose particles and all foreign materials over the roof and shifting the debris from site to out-side area as directed.

Cleaning the surface & removing of dust, existing paints from wall & roof surface, finding visible crack Making V - groove by machine on crack area, providing & applying Polymer Bonding agent (1:2) & filling those grooves by modified cement & sand mortar (1:4) with WPM liquid (5% by wt. of cement). Waterproofing coating-Providing & applying 1st coat WPM with brush/roller after mixing with cement at 1:1.5 (1 part ofand 1.5 part of cement & 2nd coat with an interval of 10 to 12 hrs by brush or roller to get average thickness of 1.5 mm. The system will be allowed to air cure for 7 days covering including parapet both side wall.

M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregates as coping including weathering, slightly rounded, chamfered angles and finishing exposed surface even and smooth including necessary form work complete all as specified and directed.

M&L for preparation of new or old plastered surfaces of wall and applying two or more coat of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surface complete all as specified and directed.

Disconnecting existing tanks of capacity exc 250 Ltr and n exc. 500 ltrs, setting aside (or lowering if required) for rapairs, cleaning, etc. and hoisting if required reconnecting and refixing in position. Note:- The cleaning, repairing etc shall be measured and paid separately.

M&L for cleaning and removing all scale and dirt, etc from tanks of capacity exc 250 & n exc 500 ltr and from mouths of circulating pipes etc.

M&L for 15mm thick Cement plaster on surfaces of concrete in CM 1:4 on roof surfaces mixed with WPC @ 200ml per 50 Kg of cement complete all as specified and dierected. Note : WPC shall be measured and paid separately

Supply only liquid water proofing compound

M&L for 40mm thick 1:2:4 plain cement concrete type B-1, (20mm graded crushed stone aggregate) as in floors and finishing cement concrete surface even and smooth with using extra cement complete all as specified and directed.

M&L for plain cement concrete M-10, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 75mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified & directed. Note:- The unit rate include for use of form work (straight or curved).

Rohan Construction Company

The new hut furnitures

ANSH VANSH CONSTRUCTION COMPANY

M/S ANIL KUMAR

friends associeates

Keshav Brothers

Paradise Interior