SPECIAL REPAIR TO NUCLEAR MEDICINE DEPARTMENT

Amount

Demolition of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified & directed.

M&L for non-skid ceramic coloured digital tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified & directed.

M&L for 10 mm thick rendering in cement mortar 1:4 on walls for fixing of tiles complete all as specified & directed.

M&L for glazed ceramic colour tiles on vertical surface of size 450 X 300 x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified & directed.

M&L for Light coloured vitrified digital tiles, 10-12 mm thick (square / rectangular) joint less digital type, area of each tiles exceeding 0.42 sqm but n exc 1.00 Sqm, in floors etc., set and jointed complete all as specified & directed.

M&L for in repair for 20mm thick granite of any colour, table rubbed & polished, jambs, pillars, wall lining (veneering to wall), window cills, plate forms etc., using marble dust with admixture of pigment to match with sheds of granite with necessary hanging arrangement i.e. stainless steel fastener with nut and bolt etc., as required, complete all as specified & directed.

Dismantling of false ceiling of any description, any thickness including cover fillets and frame work complete all as specified and directed .

M&L for exposed GI frame/grid system duly powder coated for module size of 600 x 600 mm suitable for lay-in aluminium / mineral fibre ceiling tiles, having main T runner of 24 mm size, suspended at 1200 mm C/C and cross T runner of 24 mm size, suspended at 600 mm C/C with interlocking arrangements to form grid of 600 x 600 mm, perimeter runner/channel of 15 mm size, main and cross T runner supported by 4mm dia GI suspender from slab / Roof, wall angle etc. with and including all fixing accessories and making good of disturbed wall surfaces with POP and one coat of oil emulsion distemper, as required to match the existing surfaces, complete all as specified and directed .

M&L for metal false ceiling, lay-in type, 0.5 mm thick, having tegular edge profile, made of aluminium alloy 3105, duly powder coated, perforated type with glass fibre acoustic fleece, suitable for false ceiling grid/frame module of 600 x 600 mm size, complete all as specified and directed .. (Note : The grid /frame shall be measured and paid for separately.)

M&L for complete removal of existing treatment on wall surfaces and applying one coat of Birla white wall care putty & rubbing with ambry paper to achieve smooth, even & regular surface, and applying two coats of oil bound distemper of approved tint/shade over one coat of wall primer complete all as specified and directed .

M&L for applying two coats of plastic emulsion paint with roller on wall surfaces incl preparation to receive paint etc., complete all as specified and directed .

M&L for applying two coats of plastic emulsion paint with roller on ceiling surfaces incl preparation to receive paint etc., complete all as specified and directed.

Taking down chowkhat or frames with shutter (w/o taking off shutter from frame) area n. exc 1.50 Sqm each complete all as specified and directed .

S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/m with 5.5 thick plain/frosted glass including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws etc. complete all as specified and as directed.

Taking down chowkhat or frames with shutter (w/o taking off shutter from frame) area exc 1.50 Sqm but n .exc 4.00 Sqm each complete all as specified and directed .

Supply fabricating and fixing in repair of aluminium door powder coated of extruded aluminium section including frame work complete, consisting of frame vertical and horizontal members, of size 104mmx44.45mmx1.8mm thick. Vertical style of door shutter of size 85mmx44.45mmx1.8mm thick. Top, middle and bottom rail of size 85mmx44.45x1.8mm thick and fixing 5 mm thick plain/frosted sheet glass or prelaminated particle board 9 to 10mm thick with aluminium bedding and rubber gasket/beading fixing of hydraulic floor spring one in single leaf or two nos in double leaf door, one mortice lock for aluminium door (each) and two aluminium tower bolts for each door with 02 Nos 250 mm long American type handle on each shutter fixed with plug including rectification of floor/wall to match the existing surfaces complete all as specified and as directed . (Cost of sheet glass Plain/frosted / particle board shall be included in the unit of this item)

S&F Framed work such as grills, gratings etc. with ends of bars shouldered and/ or riveted, or forged into spikes, frames guard bars, barred iron doors, ladders, railing, frame work of water tanks and similar work conforming to Fe.290.gde-E-165 complete all as specified and directed.

S&F toughened glass (frosted) frameless door with fixed portion, of 12 mm thickness, incl cutting holes, edges rounded and etching works etc. and all kind of SS patch, fitting & fixture, spider patch etc.(except 600 mm long handle & lock) complete all as specified and directed.

S&F stainless steel handle 600 mm long fixed to 12 mm thick toughened glass door with and incl all fixing accessories i. e. bolt washer, adhesive etc., complete all as specified and directed.

S&F SS door lock, glass to glass type, suitable for 12 mm thick frameless toughened glass door with and incl all fixing accessories i. e. bolt, washer, screw, adhesive etc. of suitable size, complete all as specified and directed.

S&F double cylinder floor spring hydraulically regulated suitable for toughened glass door of upto120 Kg weight, with top and bottom SS pivot, having corrosion resistance galvanized steel housing, High grade cast iron mechanism body with SS cover plate, other parts made of MS, heavy duty, ISI marked, complete all as specified and directed.

M&L for preparation of old painted surfaces of wood or wood based material of any description over 10cm, width or girth and applying one coat of synthetic enamel paint on wooden surfaces, complete all as specified and directed.

Taking up or down tubing GI 15 mm dia incl all filling complete all as specified and directed.

All as per srl item No. 24 here-in-before but bore of pipe 20 mm

S&F medium grade concealed galvanised steel water tubing with all fittings fixed to wall or laid in floors for 15 mm bore, with and including for cutting chases, pinning in, making good complete all as specified and directed.

All as per item No. 26 here-in-before but bore of pipe 20 mm.

S&F in repair 1st quality Vitreous China wash basin, white, flat back, size 580x450 mm (for Hospilal use) including waste coupling, wall bracket, waste pipe of suitable size etc complete all as specified and directed.

S&F in repair of white colour, 1st quality vitreous china washdown water closet pan (pedestal pattern) fancy type including built in vitreous china flushing cistern dual flush type of capacity 10 litrs including seat cover, complete all as specified and directed.

S&F 200mm chromium plated shower rose square with rubbit cleaning system with arm complete all as specified and directed.

S&F in replacement of PVC connection 450 long 15mm dia PTMT (PVC), complete all as specified and directed.

S&F in replacement of angular stop cock 15 mm bore with wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified & directed.

S&F in replacement of long body bib cock, 15 mm dia with wall flange made of cast copper alloy, chromium plated, complete all as specified and directed.

S&F in replacement of wash basin mixer, with out popup waste system, long body, made of cast copper alloy, chromium plated fancy type, suitable for 15 mm dia bore pipe, complete all as specified & directed.

S&F in replacement of elbow operated tap ,15mm dia with flange made of cast copper alloy, chromium plated complete all as specified & directed.

S&F in replacement of toilet paper roll holder with flap made of cast copper alloy, chromium plated, complete all as specified and directed.

S&F in replacement of towel rack 600 mm long with lower hangers and wall bracket made of cast copper alloy, chromium plated, complete all as specified and directed.

S&F in replacement of towel ring round shape of 125 mm dia made of cast copper alloy, chromium plated, complete all as specified and directed.

S&F in replacement of 2-in-1 wall mixer with provision for overhead Shower with 115mm long bend pipe on upper side, connecting legs & wall flanges made of cast copper alloy, chromium plated fancy type, complete all as specified and directed.

S&F in replacement of bottle trap 32 mm size with 250 mm long wall connection pipe and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified & directed.

S&F in replacement of two way bib cock suitable for 15 mm bore water pipe, with & including wall flange, made of cast copper alloy, chromium plated fancy type, complete all as specified & directed.

S&F in replacement of hand shower (health faucet) with 1.0 mtr long, 15 mm bore flexible tube, wall hook and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified & directed.

S&F in replacement of PVC multipurpose cabinet with front door looking mirror of overall minimum size 350 x 450 mm, complete all as specified and directed.

S&F SS glossy finish grating of square shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and incl fixing with CM to floor/nahani traps etc. complete all as specified and directed.

M&L for Cast floor trap of 75 mm outlet plain with grating as in repairs including jointing to waste pipe in cement mortar complete all as specified and directed.

M&L for cutting of existing road 1.5 M wide complete all as specified and directed. Note:- Depth of road metal only shall be measured. Soil beneath road metal shall be measured & paid under srl item no. 47 here-in-after.

Excavating in trenches n.exc. 1.5M wide and n.exc. 1.5M in depth for foundation etc. n.exc. 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Excavating over area n.exc. 1.5M in depth and getting out in soft/loose soil complete all as specified and directed.

Excavating over area but exc. 1.5M and not exc. 3.00M in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. .

Removal of excavated material or soil to a distance n.exc 50M and depositing where directed at a level n.exc. 1.5M above the starting point.

S&F in replacement of 150 mm bore cast iron (sand cast) soil waste pipe with cement joints laid in trenches, incl dismantling of old CI pipe complete all as specified & directed.

M&L for PCC 1:3:6 C-2 as in concrete bed to drain pipe incl packing under and haunching against the all sides of pipe 150 mm bore, complete all as specified & directed.

S&F cast iron sluice valve (with caps) class I, 150 mm dia, welded joint with CI pipe complete all as specified & directed.

Taking down CI pipes of any size or pattern including all fitting fixed to wall, floors, complete all as specified & directed.

S&F cast iron soil waste and vent pipes (sand cast pipes) in any length with cement joints fixed to walls, bore of pipe 100 mm complete all as specified & directed.

S&F cast iron soil waste and vent pipe (sand cast pipes) in any length with or without ears with cement joints laid in floors or in trenches, bore of pipe 100 mm complete all as specified & directed.

S&F cast iron Branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) of with parallel branch 100 mm dia complete all as specified & directed.

S&F cast iron bends, Tee (any radius) diminishing pieces or tapers (larger bore measured) of 100 mm bore of pipe fitted with oval access doors complete all as specified & directed.

S&F cast iron soil waste and vent pipes (sand cast pipes) in any length with cement joints fixed to walls, bore of pipe 75 mm dia complete all as specified & directed.

S&F in repair 100 mm dia stack clamps made out of 50 mm wide and 3 mm thick flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed.

S&F in repair 75 mm dia stack clamps out of 50 mm wide and 3 mm thick flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed.

S&F frosted glass, 5.0 mm thick, as in aluminium window/Ventilator/door, including rubber packing and aluminium beading complete all as specified and directed.

S&F in replacement of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples, complete all as specified and directed.

S&F in repair of stainless steel sink, 1.00 mm thick for kitchen or laboratory with plug, waste pipe, washers, including mild steel brackets, connecting union etc. overall approx. size 550 mm x 450 mm with approx. bowl size of 500 mm x 375 mm x 200 mm etc., complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.

M&L for brick work with sub class B bricks old size, straight or curved on plan to any radius in half brick thick walls built in CM 1:4, complete all as specified and directed.

M&L for brick work sub class B bricks old size, straight or curved on plan exc 6 m mean radius built in CM 1:6 etc., complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water etc. complete all as specified and as directed .

M&L for 15mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement , complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and as directed.

S&F in replacement of venetian blinds vertical type 100 mm wide slats made out of fabric cloth of approved shade fixed as per the instructions of manufacturers, complete all as specified & directed.

M&L for 18 mm thick MDF board with both side laminated as in repair fixed with SS screws as in cupboard and cupboard shutters including leeping/beading fancy type and polish of the same etc., including dismantling of boards/ boarding of any description, including fillets fixed in any position with nails including removing the debris / scrap of the premises, etc., complete all as specified and as directed.

S&F soft closing clip on hinge, full / half overlay type, of stainless steel, complete all as specified and as directed.

S&F 100 mm size stainless steel handles, matt finish, complete all as specified and directed.

S&F multipurpose lock 50 mm size with triple keys, suitable for cup board door/drawer , complete all as specified & directed.

S&F in repair telescopic type ball bearing slide & runner, suitable for drawers, complete all as specified and directed. Note:- Length in closed position shall be measured.

M&L for MS TMT bar, 8 to 10 mm dia and cut to length, bent to shape including cranking, binding with MS wire(annealed) of dia not less 0.9 mm dia or securing with clips, complete all as specified and directed.

M&L for mild steel TMT bars, 10 mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in mass concrete in foundation etc. complete all as specified and directed.

M&L for use & waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pilasters, buttresses etc. complete all as specified and directed.

M&L for use & waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) fair finished, complete all as specified and directed.

M&L for reinforced cement concrete Design mix M-25 (20mm graded stone agg) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete Design mix M-25 (20mm graded stone agg) as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.

M&L for reinforced cement concrete Design mix M-25 (20mm graded stone agg) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, fair finished, complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as complete all as specified & directed.

S&F 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. all as directed.

S&F 2 mm thick homogeneous PVC tiles/sheets, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive/ anti static adhesive in floor with and including all fixing accessories i.e. PVC fillets, strips, wall corners (corner coving)/angles, thermal welding etc. as per manufacturer’s instructions and including removing of existing PVC tiles/sheets, complete all as specified and directed.

S&F of SS (Gd-304) brackets, angles, hollow tubes, flats etc. of any shape and size with & incl SS screws / fasteners etc. and all kind of machine works i.e. cutting, welding, bending, moulding, grinding, polishing, buffing etc. to get the required shape and size, fixed to any position and at any surface etc., complete all as specified and directed. Note : All fixtures and fittings should be of stainless steel)

Removal of demolished material or soil to a distance n.exc 50M and depositing where directed at a level n.exc. 500M above the starting point. See item 49

M&L for Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.

Supply only integral water proofing compound

M&L for, Priming roof surfaces and applying water proofing treatment over roofs comprising of the following complete all as specified & as directed:- (a) Applying oil bound bituminous primer at the rate of 0.4 Ltrs/Sqm as per IS 3384-1986 on prepared surfaces. Surface shall be kept free till the moment, the primer is impregnated and the solvent oil in primer is evaporated. (b) Applying one coat of hot straight run bitumen @ 1.20 Kg/Sqm of grade 30/40 confirming to IS-73 (Grade S-35). (c) Laying 3mm thick APP polymeric water proofing membrane of weight not less than 3.6 kg/sqm, black finish reinforced with non woven polyester matt, with a thermo fusible finish, torching overlaps with a propane or a butane gas torch, with a overlap of 75 mm at sides and 100 mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instruction including preparation of surface. (d) Applying one coat of hot straight run bitumen grade 30/40 (Grade S-35) conforming to IS-73 @ 1.20 kg/Sqm. Note :- The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators.

M&L for water proofing treatment in Delay Tank with following stages :- (a) Cleaning of RCC surface to remove dust, loose particles, etc. with compressed air or any other suitable technique depending on site conditions, grinding any sharp edges, etc. (b) Providing and applying a glass fibre reinforced elastic, coloured acrylic – cementations coating system. Base coat: SikaTop® Seal-109 hi. Consumption base coat: 0.70 kg/m2. Reinforcement: Sika® Fab-1. Top coat: SikaTop® Seal-109 hi. Consumption top coat: 1.50 kg/m2. System requirements: conforms to IS 2645, IS 101; elongation at break: 35 %; slant shear bond strength: approx. 4 N/mm2 as per FIP 5.15; water permeability passes as per IS 2645; weather resistance as per IS 101 (c) Supply and apply a protection plaster (12 – 15 mm) admixed with appropriate integral waterproofing compound Admixture: Sika® Plastocrete Plus Consumption: 0.10 kg per bag of cement. Product requirements admixture: conforms to IS 2645 (d) Supply and apply a low solvent Primer: 1 coat of Sikagard®-67Sikagard® -67 + 20 % water by weight , 2 Coats of Sikagard® -67 by rollers, consumption 0.50kg in 2 coats.

Taking down old unserviceable point wiring from existing conduit / batten type (light, fan, socket or power point) complete with fittings such as switches, ceiling rose, pendent holder, regulator, socket, sunken boxes etc. and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc. as original i.e. brick work, plastering, white washing complete all as specified and directed.

Taking down all types of sub main wiring complete all as specified and directed

Material and labour for point wiring complete with 1.5 Sq. mm (nominal area) FRLS, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked in and including concealed PVC conduit medium grade wall thickness not less than 1.6 mm and 1.5 Sq. mm (nominal area) FRLS, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked as earth wire, connecting to common earth dolly, fixing of Metal flush box of suitable size including top cover of suitable size for fixing modular switches / sockets / fan regulator etc. and making good surface as original by plastering and whitewash/ colour/ distemper etc., complete all as specified and directed for one light point / fan point / exhaust fan point / bell / buzzer controlled by one 1-way switch/ bell push. (Note : Modular type Metal boxes and modular accessories like inner/outer cover plates etc. will be measured and paid separately as supply only.)

All as per srl item No. 96 here in before but point wiring for one socket outlet point 5 amps on the same board.

All as per srl item No. 96 here in before but point wiring for one socket outlet point 5 amps on the independent board.

All as per item No. 96 here in before but wiring with 2.5 Sqmm FRLS copper wire and 2.5 Sqmm earth wire for socket out let 6/16 Amps on independent board.

Material and labour for Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn PVC concealed conduit 25 mm dia and wall thickness not less than 1.6mm and including 4.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as specified and directed. Note : The two run of main wire, one run of earth wire and PVC conduit shall be measured as unit length.

All as per srl item No. 100 here-in-before but with 2 run of 6.0 sq. mm FRLS copper wire with 6.0 Sqmm FRLS copper cable as earth wire.

All as per srl item No. 100 here-in-before but with 2 run of 10.0 sq. mm FR copper wire with 10..0 Sqmm FRLS copper cable as earth wire.

All as per srl item No. 100 here-in-before but with 4 run of 10.0 sq. mm FR copper wire with 1x10 Sqmm FRLS copper cable as earth wire with 40 mm dia PVC concealed conduit. Note : The four run of main wire, one run of earth wire and PVC conduit shall be measured as unit length.

Supply & fixing Modular switch 6 Amp, 1 way, 1 module size complete all as specified and directed.

Supply and fixing Modular switch 16 Amp, 1 way, 1 module size complete all as specified and directed.

Supply and fixing Modular socket 6 Amp, 2/3 pin, shuttered type, 2 module size complete all as specified and directed.

Supply and fixing Modular socket 16 Amp multipurpose shuttered type, 2 module size complete all as specified and directed.

Supply and fixing Modular Bell push switch with indicator 6 Amp, with indicator lamp, 1 Module size complete all as specified and directed.

Supply and fixing Modular Fan regulator step type, 120 watts, 2 Module size complete all as specified and directed.

Supply and fixing Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps ,complete all as specified and directed.

Supply and fixing electric bell of DINGDONG type, 6 Amps, 240 volts, single pole and making all necessary connections complete all as specified and directed.

M&L for in replacement MCB 6 to 32 Amp, C Curve type, 10kA, single pole with over load and short circuit protection complete all as specified and directed.

All as srl item no 112 here in before but of 40 to 63 amps capacity.

All as srl item no 112 here in before but of 40 to 63 amps capacity and SPN type.

Supply and fixing in replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections complete all as specified and directed.

All as srl item No. 115 here in before but of SPN 08 way type.

All as srl item No. 115 here in before but of SPN 04 way type.

All as srl item No. 115 here in before but of TPN 04 way type.

Supply and fixing in replacement of MCB protected modular AC/Geyser box complete with and including 6 pin socket, plug top, modular cover plate, mini MCB SP 25 Amp capacity and PVC gang box etc, complete all as specified and directed.

Supply and fixing of Rigid non metallic PVC conduit ( ISI marked) medium grade, 20 mm dia (external) for sub main / telephone / TV wiring of 1.6 mm wall thickness inclusive of all fittings such as tees, bends, elbow, reducers, bell mouth tube ends etc and all fixing accessories such as couples, bolts, nuts, saddles, pipe hooks etc including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as specified and directed.

Taking down ceiling fans/exhaust fans/wall fan/cabin fans including disconnection of electric connection all as directed

Fixing only ceiling fan complete and connecting up including provn of cable from ceiling rose to fan 0.75 sqmm 3 core and painted with white paint with marking of MES No with black paint of suitable size letters all as directed

Fixing only exhaust complete and connecting up including provn of cable from ceiling rose to fan 0.75 sqmm 3 core and painted with white paint with marking of MES No with black paint of suitable size letters all as directed

Supply and fix exhaust fan AC single phase 220-240V of size 300 mm sweep metal, body heavy duty including self closing louver and fixing accessories, complete all as specified and directed. Note- PCC work, making round hole in wall suitable for 300 mm size exhaust fan included in quoted rates.

M&L for in replacement tube light fitting 10 watt (CW), 2 feet long in extruded aluminium batten with high efficient LEDs available in clear & milky diffuser and Colour Rendering Index (CRI>70), IP20, correlated Colour Temperature (CCT- 5700K to 6500K) , PF>0.9 and Voltage rated 220V to 240V complete all as specified and directed.

M&L for in replacement tube light fitting 18 watt (CW), 4 feet long in extruded aluminium batten with high efficient LEDs available in clear & milky diffuser and Colour Rendering Index (CRI>70), IP20, correlated Colour Temperature (CCT- 5700K to 6500K) , PF>0.9 and Voltage rated 220V to 240V complete all as specified and directed.

M&L for in replacement of recessed/pendant mounting LED light fitting (flat panel) 2' x 2' with high efficient LEDs and Glare free opal diffuser of 36 watt (CW) including fixing accessories likes strip clips and Colour Rendering Index (CRI>70), IP20, correlated Colour Temperature (CCT- 5700K to 6500K) , PF>0.9 and Voltage rated 220V to 240V etc.

M&L for in replacement recessed mounted LED light fitting 15 watt(CW) slim round down lighter with high efficient LEDs and glare free opal diffuser including fixing accessories likes strip clips and Colour Rendering Index (CRI>70), IP20, correlated Colour Temperature (CCT- 5700K to 6500K) , PF>0.9 and Voltage rated 220V to 240V etc complete all as specified and directed.

Supply and fixing in replacement of MCB TPN 80 Amps, 10 kA with over load and short circuit protection complete all as specified and directed.

Supply and installation, testing, commissioning of fume hood lined with lead, made out of stainless steel, 220v 50 Hz without table including accessories such as Gama Probe to view activity inside, Motor speed controller, Options for Hepa/active carbon filter, air and fluid connection all as specified and directed by Engineer-in-Charge. (a) Depth -70 CM (b) Height - 68 CM (c ) width - 100 CM (d) Lead thickness -03 MM (e) Blower (AMC certified blower with CE certified motor) - 01 Nos (f) Tube light fitting - 01 Nos (g) Socket 5/15 Amps -01 Nos (h) Working Area- The working chamber is made of stainless steel. The front door is equipped with acrylic glass wingow. Make- SAXSONS international Pvt. Ltd.

Supply and fix air cooled split unit air conditioner electric driven, single phase of capacity of 1.5 TR, BEE 5 star rated having cooling and heating, indoor and outdoor unit including connections complete all as specified and directed.

Supply and fixing voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170V to 250 Volt with output voltage stabilized at 230 Volt with accuracy of +- and of capacity 4 KVA.

Supply only 1 to 2 module metal flush boxes with top, bottom, side back wall knockout for conduit entry from any direction with inner and outer cover plate elegant look complete all as specified and directed.

All as per item No 133 here-in-before but 3 module

All as per item No 133 here-in-before but 4 module

All as per item No 133 here-in-before but 6 module

All as per item No 133 here-in-before but 8 module

All as per item No 133 here-in-before but 12 module

sony engineering works

ACR ENTERPRISES

GLIBS CONSTRUCTION

J D ENTERPRISES