Certain repairs / maintenance works of roofs flooring joinery sanitary fittings plastering sunken floor internal water supply and other misc works at KK Ranges in the of AGE B/R II under GE (N) Ahmednagar

Amount

Dismantling of stone slab & tiles of any description in floor, laid, bedded & pointed in any mortar in any situation etc complete all as specified and directed by Engineer-in-Charge

Demolition of cement concrete (un-reinforced) in ground floor & paving n.exc. 15cm thick below or above ground level etc complete all as specified and directed by Engineer-in-Charge

Demolition of cement concrete (reinforced) in ground floors and paving not exc 15 cm thickness below or above ground level etc complete all as specified and directed by Engineer-in-Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed by Engineer-in-Charge

Demolition of Brick work/PCC Block or stone/bou-lder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles etc complete all as specified and directed by Engineer-in-Charge

Taking down cement mortar plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkhats or frames not exc. 1.5 Sqm each with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkhats or frames exc. 1.5 Sqm and n exc 4.00 sqm each with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

Taking down shutters of any description n' exc 1 Sqm each etc complete all as specified and directed by Engineer-in-Charge

Taking down shutters of any description exc 1 Sqm but exc 2 sq. m each etc complete all as specified and directed by Engineer-in-Charge

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each and refixing in the same opening after necessary repairs etc complete all as specified and directed by Engineer-in-Charge

Excavation in treanches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc or for shafts, wells exc 10 sqm on plan and getting out in soft / disintegrated rock etc complete all as specified and directed by Engineer-in-Charge

Returning, filling in, excavated soft/disintegrated rock including spreading, leveling, watering and well ramming in layers not exceeding 25cm in soft/loose soil etc complete all as specified and directed by Engineer-in-Charge

Removing surplus Rock to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point etc complete all as specified and directed by Engineer-in-Charge

Surface dressing n exc 15 cm deep and removal of wild growth / shrubs, roots, incl spraying of deweeding chemical 1 m each side, on both sides along sewage line all as directed by Engr-in-Charge. Note:- (i) Payment for removal of wild growth shall be made once upto completion of subject work. (ii) Contractor shall be responsable to keep the site clean upto completion of the work and no payment shall be allowed after words for the stretch paid in above item etc complete all as specified and directed by Engineer-in-Charge

M & L for plain Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete etc complete all as specified and directed by Engineer-in-Charge

M&L for 75mm thick plain cement concrete 1:4:8 type D2 (40mm graded stone aggregate) as in sub base finished rough to receive finishes etc complete all as specified and directed by Engineer-in-Charge

M & L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10mm wide, 30mm deep joints at the rate of 3.00 mt centre to centre and at every turning & filling the joints with bitumen & sand mixture etc complete all as specified and directed by Engineer-in-Charge

M & L for PCC (1:2:4) type B1 using 40mm graded stone aggregate as in surface channels and drain etc complete all as specified and directed by Engineer-in-Charge

M & L for PCC (1:3:6) type C-1 using 20mm graded mechanically crushed stone aggregates as in cills, steps, bands, copings, bed plates, kerbs, hold fasts blocks etc including weathering slightly rounded or chamfered angles of throating including form work complete all as specified and as directed.

M&L for PCC (1:2:4) type B-0 using 12.5mm graded stone agg as in filling in door frames, etc complete all as specified and directed by Engineer-in-Charge

Material and labour for Pre cast reinforced cement concrete (1:2:4) type B-1 using 20mm graded mechanically crushed stone aggregates as cover slab for drain or manhole including necessary form work and making holes with 25 mm dia steel @ 150 mm centre to centre, set and jointed in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

M & L in repair for precast PCC solid block masonry type C1 of (1:3:6) using 20 mm graded stone aggregate exc 10 cm in width built in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

M&L for Walling of random rubble,masonry uncoursed well bonded bedded and solidly hearted built in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

All as per item No 24 (here-in-before) but using old stone obtained from demolition

Material and labour for TMT bars 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia etc complete all as specified and directed by Engineer-in-Charge

S&F of Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing etc complete all as specified and directed by Engineer-in-Charge

Raking out joints/ pointing from stone walls, random rubble or polygonal rubble uncoursed or brought up to courses in cement mortar or cement lime mortar including existing paint/ cement base paint etc incl scrubing, washing the surface with water before plastering etc complete all as specified and directed by Engineer-in-Charge

Material and labour for sun dried brick work in mud mortar etc complete all as specified and directed by Engineer-in-Charge

Material and labour for mud plastering, 25 mm thick on walls / floors wherever required etc complete all as specified and directed by Engineer-in-Charge

Cross ploughing over areas, ranging from 20 to 30 cms deep including removing of shrubs, roots, bushes, picking up stones exceeding 1" in overall size coming up while ploughing and removing the shrub, bushes, roots , stones etc. to a distance exceeding 200 m and not exceeding 250 m etc complete all as specified and directed by Engineer-in-Charge

Filling in depression formed in the area during exercise of rocketing and gunnery and levelling the surfaces to match with the adjoining surface all as specified and as directed . Note :- The soil shall not be digged from outside MD land and the soil spread from adjoining area to be collected, filled and levelled etc complete all as specified and directed by Engineer-in-Charge

Supply and laying bamboos / ballies 6.5 m in length, dia not less than 8 cm at one end and not less than 6cm at other end etc complete all as specified and directed by Engineer-in-Charge

Cutting the bushes / vegetation / shrubs / thorny plants / trees of any type and not exc 30 cm in girth including roots growing up in the line of sight from watch tower to gunnery area and watch tower to target area and removing to a distance exceeding 150 m but not exceeding 200 m from the area and disposed off etc complete all as specified and directed by Engineer-in-Charge

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed by Engineer-in-Charge

Material and labour for providing water proofing treatment on roofs, as per manufecturer's instructions and as specified after taking down/out as existing at site :- (a) Cleaning the newly plastered surfaces with wire brushes and applying a coat of bituminous primer @ 0.30 ltrs/sqmts and allow to dry. (b) Applying and laying torch APP polymer modified bituminous membrance 3 mm thick with non woven polyster matt as reinforced weighing not less than 3 kg/sqmts by thermofusion process as per manufacturers specification including applying one coat of aluminium paint. Note : (i) Work has to be carried out strictly by the authonticated applicator of the manufacturer and as per manufacturers specification as approved by GE. (ii) Certificate from manufacturer shall be submitted by the contractor.

M&L for rendering 10mm thick in cement and sand mortar (1:4) over concrete surfaces finished even and smooth including water proofing compound as per manufacturers instructions etc complete all as specified and directed by Engineer-in-Charge

Supply only integral water proofing compound etc complete all as specified and directed by Engineer-in-Charge

Material and labour for 100 mm bore SGSW drain pipe grade 'A' laid in trenches and jointed as specified including cement concrete bed to pipe including packing under and hauching against the sides of pipe in PCC (1:4:8) type D-2 using 40 mm graded mechanically crushed stone aggregates,, making necessary connections after cutting into existing sewer line /manhole to make it functional after taking down/out salt glazed ware, AC or reinforced concrete pipe as existing at site etc complete all as specified and directed by Engineer-in-Charge

All as per item No 39 (here-in-before) but 150mm bore pipe

Material and labour for 200mm bore Reinforced cement concrete pipe, type NP-2 with & including cement concrete bed to pipe including packing under and hauching against the sides of pipe in PCC (1:4:8) type D-2 using 40 mm graded mechanically crushed stone aggregates, making necessary connections after cutting into existing sewer line /manhole to make it functional after taking down/out salt glazed ware, AC or reinforced concrete pipe as existing at site etc complete all as specified and directed by Engineer-in-Charge

Cutting into existing manhole for connecting new drain 100 mm internal dia of pipe making good to pipe and rendering cutting out existing benching for good forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 using graded stone aggregates smooth finished and as required complete for 100mm internal dia pipe etc complete all as specified and directed by Engineer-in-Charge

Cutting into existing manhole for connecting new drain 150 mm internal dia of pipe making good to pipe and rendering cutting out existing benching for good forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 using graded stone aggregate smooth finished and as required complete for 150mm internal dia pipe etc complete all as specified and directed by Engineer-in-Charge

Supplying and fixing precast manhole cover (LD) of size 12" x 12" made up of steel fibre reinforced concrete M-30 grade as per IS etc complete all as specified and directed by Engineer-in-Charge Note : Make : Dehere, Everest, Shakuntal Industries or equivalent makes mentioned in list of makes in Appendix `C'

All as per item No 44 (here-in-before) but size 18" x 36" etc

M&L for Sand filling in floor or paving laid in layer not exc 15cm thick spread, levelled and rammmed including watering etc complete all as specified and directed by Engineer-in-Charge

Supply only empty polypropylene bags white in colour of 50 kg (1.25 cft) capacity, which is generally used for storing cement etc complete all as specified and directed by Engineer-in-Charge

Supply of crushed stone sand including filling in empty polypropylene bags and placed in circle wise position of required size and shape including stitching of polypropylene bag etc complete all as specified and directed by Engineer-in-Charge

M&L for 25mm to 40 mm thick rough dressed shahabad stone as in floor etc over and including 15 mm screed bed in cement and sand mortr (1:6) and pointed in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

Hacking out old broken glass from steel or wooden frames including punching for drilling out old glazing pins / spring clips or with putty etc complete all as specified and directed by Engineer-in-Charge

Taking down pipes from bldgs and rain water pipes (any size or pattern), including all fittings, head shoes, bends, swan-necks atc., incl cleaning or refixing or removal to store (mesured overall as fixed along the centre line over fittings the accessories) etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing PVC (SWR) pipe 110/100mm bore single socketed in any length with rubber ring fixed to wall with approved solvent/adhesive etc complete all as specified and directed by Engineer-in-Charge

All as per Sr item No 52 (here-in-before) but 75 mm bore

Supply and fixing PVC (SWR) bends any radius, for 110/100 mm bore of pipe fixed with approved solvent/adhesive etc complete all as specified and directed by Engineer-in-Charge

All as per srl item No 54 (here-in-before) but 75 mm bore

Supply and fixing PVC (SWR) 110mm bore 'T' equal or unequal etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs 110 mm bore PVC (SWR) branch piece single (single Y) equal or unequal etc complete all as specified and directed by Engineer-in-Charge

All as per item No 57 (here-in-before) but 75 mm bore

Supply and fix in repairs 110 mm bore PVC (SWR) branch piece double (double Y) equal or unequal etc complete all as specified and directed by Engineer-in-Charge

All as per item No 59 (here-in-before) but 75 mm bore.

M&L for keyed pointing to random or polygonal rubble, uncoursed or brought upto course in cement and sand mortar (1:4) etc complete all as specified and directed by Engineer-in-Charge

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base 15mm thick in cement and sand mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge

Material and labour for coloured glazed ceramic tiles digitally printed premium series of size exc 0.06 Sqm and n'exc 0.10 Sqm , 8-10 mm thick as approved by GE as in dado/skirting or on vertical surfaces, over and including 10 mm thick backing coat in cement and sand mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for Anti skid ceramic coloured tiles to match dado tiles makes as specified in PS,7-8 mm thick as approved by GE (square / rectangular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm, as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for joint free ceramic coloured tiles SSR series of Johnson/ FT series of orient/bell/Duro cotto series of Nitco equivalent in makes as specified in PS, 7-8 mm thick as approved by GE (square / rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm, as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) set and jointed with white or coloured cement to match etc complete all as specified and directed by Engineer-in-Charge

All as per srl item No 65 (here-in-before) but over 10 mm thick backing in cement and sand mortar (1:4) as in dado / skirting or on vertical surfaces

Material and labour 16 to 18mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, full round moulding the edge laid over screed bed 15mm thick in cement and sand mortar (1:4) jointing , pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror etc complete all as specified and directed by Engineer-in-Charge

S&F fix in repairs wash hand basin vitreous China white , flat back or angle type of size 500 X 400 mm incl pillar tap 15mm dia CP, waste chain and plug and porcelain stopper , waste pipe, a pair of brackets, or erecting stand and PVC connection etc complete all as specified and directed by Engineer-in-Charge Make :- Cat Part No C0471 (CHT) Indus series Of Parryware or equivalent makes as per list of make mentioned in appendix `C

Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistren etc complete all as specified and directed by Engineer-in-Charge. Make :- Cat Part No C0117 Of Parryware or Cat Part No 20042 Of Hindware or equivalent makes mentioned in list of makes in Appendix `C'

Supply and fix PVC valveless, syphonic action type, flushing cistern,low level, all accesories etc complete all as specified and directed by Engineer-in-Charge Make :- Sleek essence series Of Hindware or Cat part No E8303 Of Parryware or equivalent makes mentioned in list of makes in Appendix `C'

Supply and fix in repair health faucet (hand shower) with 8 mm dia 1 m long flexible tube wall mounted / hooked etc complete all as specified and directed by Engineer-in-Charge Cat Part No 573 of Jaquar or equivalent makes mentioned in list of makes in Appendix `C'

Supply and fixing in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device complete connecting to 'P' or 'S' trap etc complete all as specified and directed by Engineer-in-Charge Make:-Petite series Cat part No C0287(S)/88(P) Incl seat cover Cat part No E8309 of Parryware or equivalent make mentioned in list of makes in Appendix `C'

Supply and fixe in repairs stainless steel kitchen sink matt finish without draining bowl size 410 X 410 X 230 mm, made out of 1.00 mm thick SS sheet of high quality including a pait of brackets, waste coupling, plug and chain, 32 mm dia PVC flexible waste pipe and nahani trap etc complete all as specified and directed by Engineer-in-Charge Make : (i) Model Olympia Satin Finish silent square range of Nirali or equivalent in Dimond and Blue Star (ii) Waste Coupling of make as per sink

Supply and fix in repairs looking mirror of size 600 mm X450 mm etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No C 8606 Of Parryware or equivalent makes mentioned in list of makes in Appendix `C'

Cutting chases in brick/ block wall, pinning in. making good to facings where required and pointing in cement and sand mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth etc complete all as specified and directed by Engineer-in-Charge

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re- fixing or removal to store etc complete all as specified and directed by Engineer-in-Charge

All as per item No 76 (here-in-before) but 20 mm bore tubing

M & L for 15 mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings or laid in floors etc complete all as specified and directed by Engineer-In-Charge.

M & L for 20 mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings or laid in floors etc complete all as specified and directed by Engineer-In-Charge.

Taking up or down 25 mm bore steel tubing and connections, including cleaning for re- fixing or removal to store etc complete all as specified and directed by Engineer-in-Charge

M & L for 25 mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings or laid in floors etc complete all as specified and directed by Engineer-In-Charge.

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs stop cock cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No MOR 1320(Orintal series) of MARC or equivalent makes mentioned in list of makes in Appendix `C'

Supply and fixing in repairs tubular towel rail, brass chromium plated 20 mm dia `D' type, 60 cm long between flanges including a pair of brackets etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No MOR 1020 A(Orintal series) of MARC or equivalent makes mentioned in list of makes in Appendix `C'

Supply and fixing in repairs 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No MOR 1010(Orintal series) of MARC or equivalent makes mentioned in list of makes in Appendix `C'

M&L for cast iron floor trap with grating 75mm dia including jointing to waste pipe fixed in cement concrete type (1:2:4) type B1 using graded stone aggregate including removing old traps etc complete all as specified and directed by Engineer-in-Charge

M&L for Grating doom 100mm dia of PTMT (Minimum weight 25gms) etc complete all as specified and directed by Engineer-in-Charge

M&L for Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) etc complete all as specified and directed by Engineer-in-Charge

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aparture 1mm etc complete all as specified and directed by Engineer-in-Charge.

S & F 3 mm thick figured glass pin head type, and glazing with oil putty in square n exc 0.5 Sqm in each pane to steel windows including glazing pins etc. complete all as specified and directed by the Engineer-in-Charge.

S & F 3 mm thick plain sheet glass and glazing with oil putty in square n exc 0.5 Sqm in each pane to steel windows including glazing pins etc. complete all as specified and directed by the Engineer-in-Charge.

Hacking out old broken glass from steel or wooden frames including punching for drilling out old glazing pins / spring clips or with putty complete all as specified and directed and providing 6mm thick fiber glass glazing with oil putty in area not exc 0.5 sm each etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair 20mm dia mild steel chromium plated curtain rods incl brackets etc complete all as specified and directed by Engineer-in-Charge

Material and labour for 60 mm thick, PCC pavers interlocking tiles of glossy finish, with grey cement and no pigment ,any shape & size conforming to IS 15658 of 2006. M-35 grade made up with 12.5mm graded mechanically crushed stone aggregates, factory made over and incl 30mm thick sand cushioning and joints filled with fine sand incl levelling & sweeping etc complete all as specified and directed by Engineer-in-Charge

S&F Factory made solid panel PVC door shutter30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.etc complete all as specified and directed by Engineer-in-Charge

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing etc complete all as specified and directed by Engineer-in-Charge

S&F 100 mm size butt hinges medium weight, cold rolled mild steel, and fixed etc complete all as specified and directed by Engineer-in-Charge

S&F 150 mm size aluminium anodised, barrel tower bolts of ex- truded section and fixed etc complete all as specified and directed by Engineer-in-Charge

All as per item No. 99 (here-in-before) but in repairs

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised

All as per item No 101 (here-in-before) but in repairs

Material and labour in repairs for false ceiling with Vinyle faced Arm-Gyp-FB, ceiling 600 x 600 x 9mm thick with washable metallized polyster foil backing with Vinyle covered edges, supporting sections shall be of suitable size from same makes embossed on sections and level adjuster duly suspended by 2 mm dia GI wire fixed to roof at 600mm centre to centre as per manufacturere's instructions / specification and all as directed including taking down/ out existing etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering 15mm thick in cement and sand mortar (1:6) on fair faces of concrete surfaces finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

M&L for Rendering 10mm thick on fair faces of brick work or concrete surface in cement and sand mortar (1:4) finished even & smooth without using extra cement including water proofing compound as per manufacturers instructions etc complete all as specified and directed by Engineer-in-Charge

Supply and fix rotational moulded polyethylene water storage tanks double layer ISI marked conforming to IS 12701-1996 (cylindrical vertical with closed top) and made out of virgin FDA approved polyethylene material of 500 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting etc complete all as specified and directed by Engineer-in-Charge

All as per item No.106 (here-in-before) but 1000 ltr capacity

Supply and fixing 300 mm long Aluminium anodized sliding door bolt with hasp , staple (bolt type) fixing clips of sheet cast or extruded section & fixing bolts , sliding bolts of extruded section etc complete all as specified and directed by Engineer-in-charge.

All as per item No. 107 (here-in-before) but in repairs

S&F 2 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed by Engineer-in-charge.

M&L for 35 mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial plywood. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and directed by Engineer-in-charge.

S&F 30 mm thick IInd class hardwood factory made glazed & skeleton shutters open rebated and prepared to receive glass gauge, divided into square or rectangles with plain chamfered or rounded mitred & rebated slash bars including beads mitred for securing glass wire gauge etc complete all as specified and directed by Engineer-in-charge.

S & F 105 x 60 mm size pressed steel frames for doors with one or more rebates incl necessary hold fasts, hinges, lock strike plate etc complete all as specified and directed by Engineer-in-charge.

S & F 125 x 60 mm size pressed steel frames for doors with one or more rebates incl necessary hold fasts, hinges, lock strike plate etc complete all as specified and directed by Engineer-in-charge.

S&F 300mm MS ordinary rat tail rod pattern spring including roller and roller plate etc complete all as specified and directed by Engineer-in-charge.

S & F floor door stopper, aluminium alloy body and tongue anodised with hard drawn steel spring of 140mm size overall etc complete all as specified and directed by Engineer-in-charge.

Supply and fix in repairs ball high pressureof PTMT with epoxy coated alumium rod & density plastic ball srewed for iron pipe and fixed (Minium weight 15mm-142 gms) 15 mm etc complete all as specified and directed by Engineer-in-charge.

All as per item No 117 (here-in-before) but 20 mm dia bore.

Supply and fixed in repairs 32 mm dia PVC waste pipe (outlet pipe) plain fixed to waste coupling of WHB or Sink etc complete all as specified and directed by Engineer-in-charge.

All as per item No 119 (here-in-bfore) but 38 mm dia

Supply and fix in repair Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms). etc complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old decorated plastered or unplastered surfaces of walls including cornices etc and applying one coat of white lime wash on walls etc complete all as specified and directed by Engineer-in-charge.

Preparation of old/new decorated plastered or unplastered surfaces of walls including cornices etc and applying two coats of white lime wash on walls etc complete all as specified and directed by Engineer-in-charge.

All as per item No.123 (here-in-before) but on ceiling.

M&L for complete removal of existing treatment of walls or other plastered surfaces and preparing the surfaces and applying two coats of OBD (washable) over a layer of 2 mm birla putty including preparation of surfaces and roller finish etc complete all as specified and directed by Engineer-in-charge.

M & L for preparation of new plastered surfaces applying two coats for cement paint with roller finished etc complete all as specified and directed by Engineer-in-charge.

M & L for preparation of old plastered surface of wall and applying one coat of cement base paint etc complete all as specified and directed by Engineer-in-charge.

M & L for preparation of old plastered surface of wall and applying Two coats of cement paint with different tint for camoughflage finish of atleast three shades etc complete all as specified and directed by Engineer-in-charge.

M&L for preparing new wooden surfaces of any description, not otherwise descri-bed, over 10cm width or girth applying two coats of synthetic anamel paint over one coat of pink primer etc complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old painted Wood or wood based surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel etc complete all as specified and directed by Engineer-in-charge.

All as per item No 130 (here-in-before) but on Steel or Iron surfaces.

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings etc complete all as specified and directed by Engineer-in-charge.

S&F 6mm thick Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings etc complete all as specified and directed by Engineer-in-charge.

M&L for Steel windows with side hung shutters including projecting type hinges with steel handles and steel peg stay, complete with glazing bars, dovetailed or welded etc complete all as specified and directed by Engineer-in-charge.

M&L for Steel ventilators with top hung shutters including hinges steel peg stay, etc complete all as specified and directed by Engineer-in-charge.

M&L for Cleaning of service tank upto 500 ltrs by removing all scale, dirt, silt, mud etc, from tanks and from mouths of circulating pipes including washing of tank internally with bleaching powder after removing scale dirt mud ec from tank and removing algae outside from tank from below bottom of tank and disinfecting tank by soraying sodium hypo chlorite solution in tank writing down date of cleaning on tank by synthetic enamel paint size of alphabet/numerical shall be minimum 7 cm using stencils et complete all as specified and directed by Engineer-in-Charge. Note:- The quoted rate shall include dismantling and refixing of water tank and check float valve refixed or provide new as applicable as etc complete all as specified and directed by Engineer-in-Charge

All as per item No 136 (here-in-before) but 1000 ltrs

An amount of Rs 19,180.00 shall be deducted from BOQ on account of schedule of credit

M/s.D.K.ALKUTE

M/s R H Dare

M/s. Sagar Traders

S.K.HARAL

M/S Bhima Construction

M/s. N D Karande