SITC of fountain work at Kamal Talai gulab bagh with 3-years O and M (e09_/ Light_01)

Designing, Manufacturing, supplying, Installation, testing and commissioning of the WEDDING CAKE Fountain consisting of:. (minimum dimensions) Fountain Grid made up of Aluminum or better material pipes & channels as per required design channel frame and rigidly fitted with J hooks and bolts as per layout drawing.

SITC of Dynamic and Static Fountain Nozzles made up of brass/Gun metal/S.S./ pvc as per requirement. Adjustable nozzles of various sizes and with adapter will be threaded on to the Aluminium pipes and adjusted with suitable hydraulic bank, supported by various split size independent pumps with negligible friction loss As per technical specification & shall be as per manufacturer’s standard to maintain show value of the project. (FOAM JET NOZZLE )

FOAM JET NOZZLE (1 Nos.)

PUMP Designing, supply erection, commissioning and testing of Monoblock submersible pump of Kirlosker / crompton make AC Three phase 220 Volt, 50 cycle, supply with foundation bolt, suction stainless steel mesh cover as per instruction of engineer in charge. 10 HP three phase

Supply and fixing of panel box manufactured by ISI Certified Company make :- L & T / Siemens/ABB/ Schneider for Below pumps of steel sheet enclosure with front door stand mounting Hut type outdoor panel with detachable bottom plate with provision for incoming & outgoing cable, red oxide under coat and paint finish. Panel comprising 1 No main incoming 2 pole MCB, three nos. back up HRC fuse for pump circuit, Contactors unit with overload relay, start stop push button switch Contactors unit with overload relay, all accessories must be or Cat. I duly tested. Electric panels protected against dust and jets of water per rating IP-55 Tested Complete in all respect as directed by Engineer in charge.(CONTROL PANEL)

P/Laying ISI marked P.V.C. insulated submersible cable confirming to(IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, existing pipe / open trench / Cable tray / on surface including making connection etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR.6.0 Sq.mm 3 core flat / Round

dust prof cabinet

operation and maintenance for 3 year complete in all respect as directed by engineer in charge .