CERTAIN REPAIR TO INTERLOCKING TILE RETAINING WALLS DRAINS FENCING AND GATE AT SECT C UNDER GE 865 EWS

Amount

Demolition of cement concrete in ground floor and pavings n.exc 15cm thick below or above ground level and removing demolised material out of Military station.

Demolition of cement concrete in any description and any position not otherwise specifically provided for.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition), all as specified and as directed

Dismantling chain link fencing/expanded metal or mesh exceeding 4kg/Sqm fixed in steel, wood fillets, concrete post etc. of any description.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc.laid bedded and pointed in any mortar.

Demolition of bricks (laid flat or on edge) or interlocking tiles in floors, channels, kerbes, aprons, etc laid dry of laid dry and pointed.

Demolition of precast concrete block walling built in cement mortar including all quoins, arches , pillars etc all as specified and as directed

Demolition of stone /boulder masonry built in cement mortar including all quoins, arches , pillars etc and removing demolised material out of Military station all as specified and as directed

M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonry exc 10cm in width with solid block masonry with solid blocks,exc.10cm in width and setting in cement mortar 1:6 all as Spfd

All as per item No 10 above but except blocks.

M&L random rubble stone masonry well bonded bedded solidly hearted in CM 1:6.

All as per item No 12 above but except stones.

Extra over stone walling for hammer dressing for lime sand stone n'exc 40mm deep when held against edge complete all as specified and as directed.

M&L for 15mm thick rendering on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:6 complete all as specified and as directed

M&L for 10mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed

M&L for 15 mm thick rendering on other than faces of stone masonry works finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed

Raised pointing to random or polygonal rubble, uncoursed block walling in CM 1:4 complete all as specified and as directed.

Supply only WPC

M&L for preparation of new plastered wall surface of any description and applying two coats of cement based paint over a coat of chalk whiting complete all as specified and as directed.

M&L for preparation of old plastered wall surface of any description and applayng one coat of cement based paint complete all as specified and as directed.

M&L for Cement concrete type D-2,1:4:8 (40mm graded aggreate) 100 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc..

M&L machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 60mm thickiness M-35 grade over and including 50mm thick (avg) sand cushioning including watering, ramming and rolling complete all as specified and as directed by Engr-in-Charge.

M&L for Cement concrete type D-2,1:4:8 (40mm graded aggreate) 75 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc.

M&L PCC 1:2:4, 25 mm thick type B0 using 12.5mm graded stone aggregate as in floor finished even and fair without using extra cement complete all as directed by Engr-in-charge.

M&L for coloured Chequred cement concrete tiles 30cm X 30cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with white cement & pigments laid over 20mm thick cement screed base (1:6) and all as directed by Engr-in - charge.

M&l for PCC type D-2(1:4:8) using 40mm graded crushed aggregate as mass conc and filling of foundation all as specfed and drected.

M&L dressed granite or trap /Precast cement concrete type C2 (1:3:6) (12.5 mm nominal size of graded course aggregate) Kerb stones roughly squared stones of size 20cm x 30 cm ,so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck flush ( rate included for removal of old damaged Kerb stones of any description).

S&F MS Wind ties for roof including securing bolts, posts & struts including cutting tops to shapes as directed,including all necessary drilling,bolting or riveting etc and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed.

M&L for PCC type C-2, (1:3:6) , using 40mm graded crushed stone aggregate as in lean conc , sub base ,or mass conc , foundation filling etc.

Fixing only Chain link fencing including line wires, any mesh size and type to any type of standards,rails, straining bolts,etc.including provision of binding wire.

Supply only chain link MS galvanised fencing of size as directed by Engr-in-charge.

M&L for PCC type B1 (1:2:4) using 20 mm graded crushed aggregate in coping ,mass concrete.

M&L cement concrete Type C2 (1:3:6) (40mm graded aggregate)in Surface channels and drains all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.

Extra for forming fair finished drain or channel 55cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.

M&L for precast cement concrete Type C1, 1:3:6 (20mm graded aggregate) in lindings, cover slabs (for manholes etc), chullah hoods, chhajja, water troughs, shelves and similar articles with plain faces, setting in CM 1:6, complete all as specified and as directed

Mild steel TMT bars10mm dia and over (for tie bar of chain link fencing), cut length, bent to shape required , including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips .

neelam construction co

Mehar Enterprises

PADMA ENTERPRISES