Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹27.9 LAccepted-AOC | 1 | Accepted-AOC BEING LOWEST | |
| 2 | 2₹29.3 L+₹66,851.50 (2.34%)Rejected-Finance WARD NO 20 BIRLA HOUSE JEDERUA KALA DISTT GWALIOR M P 474006 | GWALIOR | GWALIOR | MADHYA PRADESH | 474006 | 2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | 3₹31.6 L+₹3.0 L (10.6%)Rejected-Finance | 3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | 4₹42.4 L+₹13.8 L (48.3%)Rejected-Finance | 4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | 5₹43.0 L+₹14.4 L (50.4%)Rejected-Finance 197 C P COLONY MORAR GWALIOR GWALIOR MADHYA PRADESH 474006 | GWALIOR | MADHYA PRADESH | 474006 | 5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
25 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) TECH AREA GWALIOR
GE (AF) TECH AREA GWALIOR
REPAIR/MAINT OF TOILET AND CERTAIN E/M INSTALLATION IN TECH AREA AT AF STN GWALIOR
2024_MES_650578_1
8900/1531/GWL/E8
Open Tender
Civil Works
Item Rate
330 days
GWALIOR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) TECH AREA GWALIOR
₹90,000
Yes
24 Jul 2024
20 Apr 2024
1 Jun 2024
20 Apr 2024
25 May 2024
11 May 2024
Amount
Demolition of RCC in cover slab, floors and pavings n.exc 15 cm thickness (below or above ground level ) reinforcement cut as required to facilitate demolition complete all as specified and directed
M & L for providing precast reinforced cement concrete type B1 (1:2:4) (using 20 mm graded aggregate ) as in cover Slab including necessary formwork set in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.
M&L for Mild steel bars (TMT bars) 8mm dia and over cut to length, bent to shape required including cranking bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia, complete all as specified and directed.
Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.
Description same all as per item No 4 above but 15 mm bore complete all as specified and directed.
Refixing old steel tubing 20 mm bore and connections in new or old position ( walls,ceiling, floors, etc) complete all as specified and directed
Description same all as per item No 6 above but 15 mm bore complete all as specified and directed
S&F steel tubing 20mm bore medium grade with all fitting and fixed complete to walls, floor and ceiling etc complete all as specified and directed Note :- cutting chases and making good shall be measured and paid separately under respective item.
Description same all as per item No 8 above but 15 mm bore complete all as specified and directed.
M&L for cutting chases, pinning in making good to facing for concealed water tubing n.exc 10cm girth and making good with (1:3) cement mortar complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for glazed ceramic tiles coloured in vertical surface 450x300x7mm thick as on wall etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed.
Demollition of cement concrete ( unreinforced) including floor tiles, screed bed at ground floors and pavings, coping n. exc 15 cm thick below or above ground level and removing the demolished material to a distance exc 500 m but not exceeding 1.5 km and depositing where directed, complete all as specified and directed.
M&L for PCC (1:2:4) type B0 using 12.5mm graded stone aggregate as in benching, kerbs, haunching and levelling course etc complete all as specified and as directed.
M&L for plain cement concrete 1:4:8 Type D2 (using 40mm graded stone aggregate) as in foundation filling, sub base and mass concrete and sunken complete all as specified and directed
M & L for PCC (1:2:4) type B0, (using 12.5mm graded stone aggregate) as in coping including necessary form work complete all as specified and directed .
M&L for 75 mm thick plain cement concrete (1:3:6) type C2, using (20 mm graded stone aggregate) as in Plinth protection etc and finishing the surface even & fair complete all as specified and directed.
M&L for 100 mm thick plain cement concrete (1:2:4) type B2, using 40 mm graded stone aggregate as in pavings/hard standings and finishing cement concrete surface even & fair,laid in alternate panels complete all as specified and directed.
M & L for 75mm thick cement concrete type D-2, 1:4:8 using (40 mm graded aggregate) as in sub base all as specified and directed.
M&L for 25 mm thick PCC (1:2:4) type B0 (12.5 mm graded stone agg) as in sub base of flooring complete all as specified and directed.
M&L for 20 mm thick screed bed or bedding in layer of mortar for laying floor finishes in cement plaster 1:6 complete all as specified and directed.
M&L for 15 mm thick screed bed or bedding in layer of mortar for laying floor finishes in cement plaster 1:6 complete all as specified and directed.
M&L for non skid coloured ceramic tiles 7-8mm thick (Square/Rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles complete all as specified and directed.
M & L for machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge.
S & F for Non-skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles all as specified and directed.
All as per item no. 25 here-in-before but as in skirting/dado including jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including 10mm thick cement plaster1:4 as backing coat complete all as specified and directed.
M&L for 10 to 12mm thick Endura designer tiles of size n.exc 0.16 Sqm any colour and shape with grey cement and pigment set, jointed and pointed on neat cement slurry as in floors complete all as specified and directed by Engr-in-Charge. (Make - DUROTA/JOHNSON/ORIENT/SOMANY)
S&F in repair for 200 mm bore dia PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor and wall complete all as specfied and directed.
S&F in repair 200mm PVC(SWR) bends fixed to PVC pipes with necessary solvent cement complete all as specfied and directed.
S&F in repair for 110 mm bore dia PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor and wall complete all as specfied and directed.
S&F in repair 110mm PVC(SWR) bends fixed to PVC pipes with necessary solvent cement complete all as specfied and directed.
S&F in repair 110mm PVC(SWR) junction single, (Single T) eual or unequal fixed to PVC pipes with necessary solvent cement complete all specfied and directed.
S&F in repair for 75mm bore dia PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor and wall complete all as specfied and directed.
S&F in repair 75mm PVC(SWR) bends fixed to PVC pipes with necessary solvent cement complete all as specfied and directed.
S&F in repair for 25mm bore dia PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor and wall complete all as specfied and directed.
S&F in repair 25mm PVC(SWR) bends complete all as specfied and directed.
S&F in repair PVC(SWR) floor trap/nahani trap including PVC grating suitable for 75mm bore pipe complete all as specified and directed.
Demolition Stone slabs and tiles of any description or thickness in floors, walls laid bedded and pointed in any mortar complete all as specified and directed.
M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in platforms for ovall shape wash hand basin inculding cutting to fit the WHB, partition and like in cement mortar (1:4) inclluding pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20mm screed bed in CM 1:6 complete all as specified and directed.
M&L for 60mm thickness Machine pressed precast concrete interlocking paver block any shape and size of M-35 Grade confirming to IS 15658-2006 with grey cement and pigment complete all as specified and directed. (Make :- ISI Marked as approved by GE)
Sand filing under floors or in foundation incl. watering and consolidation complete all as specified and directed.
M&L for applying two coats of OMNIPLAS EP-101 epoxy compound manufactured by M/S OM AGRO INDUSTRIES PLASTIC Pvt Ltd. Bombay or equivalent as approved by GE in proportions as per manufacturer instruction on complete surfaces of floor and wall of sunken portion complete all as specified and directed.
S&F in repair, rotational moulded ploythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of 500 Ltr capacity complete all as specified and directed.
S&F in repair, rotational moulded ploythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of 1000 Ltr capacity complete all as specified and directed.
S&F in repair in repair sinks with drainage board made of stainless steel 1 mm thick in kitchen or laboratory with plug washers and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete as specified and as directed.
S&F in repair, stainless steel grating with centre hole of size 100 mm complete all as specified and directed.
S&F in repair 15mm bore Angle valve fancy type, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union as approved complete all as specified and directed.
S&F in repair 15mm bore two way Angle valve fancy type, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union as approved complete all as specified and directed.
S&F in repair stop valve 20mm bore cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repair chromium plated fency type long body bib taps cast copper alloy with capston head handle screwed down screwed for iron pipe or for brass ferrule & fixed in 15 mm bore pipe complete all as specified and directed.
S&F in repair 15mm bore pillar taps, fancy type, chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
S&F in repair Brass CP Bottle trap 32mm bore with 300mm and 190mm long wall connections pipes including necessary packing, complete all as specified and directed.
S&F in repair, 15mm bore health faucet fancy type chromium plated with accessories complete all as specified and directed.
S&F in repair, 15mm bore basin mixer taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down for pipe, high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.
S&F in repair, 15mm bore wall mixer taps, cast copper alloy, chromium plated, fancy type screwed down for pipe, high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
S&F in repair, float valve/ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed ( Minimum weight 20 mm -210 gms ) suitable for 20 mm dia Pipe complete all as specified and directed.
S&F in repair, for gun metal, globe or gate valves, with iron wheel head , screwed both ends for iron pipe of bore 20 mm and fixed complete all as specified and directed.
S & F in repair, for 10 litre capacity PVC valve less symphonic action type flushing cistern low level , white , with inlet, ball valve, float and handle including brackets complete all as specified and directed.
S&F in repair for PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.
S&F in repair for PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.
S&F in repair, vitreous china squatting pan 'Orrisa' pattern size 580 x 440 mm white integral floor rests ( excluding flushing cistern and flush pipe ) including connection to trap and to flushing pipe, anti syphonage pipe etc complete including making good to floor complete all as specified and directed.
S&F in repair vitreous china wash down water closet pan (pedestal pattern), white including seat cover , fixing bolts and flush pipe complete all as specified and directed.
S&F in repair vitreous china counter top wash hand basin, white/coloured, flat back, size 560 x 455mm excluding taps, waste pipe & PTMT waste coupling of 32 mm dia complete all as specified and directed. MAKE : Parryware, Cera, Jaguar,Hindware or equivalent Make as approved by GE.
S & F in repair vitreous china wash basin, white, flat back size 550 X 400mm including waste pipe complete all as specified and directed.
S&F in repair Vitreous China urinals half stall type flat back white , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinals to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing flush pipe grating and union for discharge pipe complete all as specfied and directed.
S&F in repair 8-10 mm toughned glass urinal partition of size 450X900mm including necessary brackets complete all as specified and directed.
S&F in repair coloured vitreous china EWC including cistern (Cascade Pattern) wall hung/floor mounting as single piece closet of parryware or equivalent including all fitting & fixtures required for proper function complete including necessary pipe, bend, making holes into existing wall, floor etc and making good with PCC 1:2:4 type B1 using 20mm graded stone aggregate complete all as specified and directed.
S&F in repair waste pipe, complete all as specified and directed.
S & F in reapir flush pipe of polythylene of low or high level density or PVC ,32 mm dia ,for low level cistern complete all as specified and directed.
S&F in repair CP waste coupling 32 mm full threaded for WHB complete all as specified and directed.
S&F in repair Waste coupling of CP brass (half or full threaded) suitable for urinals, 32 mm dia complete all as specified and directed.
S&F in repair chromium plated Self Closers Pillar Tap completecomplete all as specified and directed.
S&F in repair chromium plated Flush Cock (Push Type) 25mm complete all as specified and directed.
S&F in repair chromium plated Pillar Cock Swan Neck (T/M) complete all as specified and directed.
S&F in repair chromium plated Urinal spreader with 15mm dia pipe complete all as specified and directed.
S&F in repair CP toilet paper holder box type with necessary brass screw complete all as specified and directed.
S&F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
S&F in repair old unserviceable PVC top cover of tanks over head tank of 300 to 500 ltrs capacity with hinging device, with necessary nuts, bolts and washers installed at roof top, all as specified and directed by Engineer-in-Charge.
All as per item No 79 above but capacity exceeding 500 Ltrs and not exceeding 1000 Ltrs all as specified and directed by Engineer-in-Charge.
S & F in repair 2mm thick pvc tiles/ sheets , liminated plain coloured ,marbled mosaic or mottled finish laid with approved rubber based adhesive in floors including all cutting and waste and work in all position complete all as specified and directed .
Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillasters etc complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for brick work with sub class 'B' bricks , straight or curved on plan exc. 6 m mean radius built in CM 1:4 complete all as specified and directed.
Description same all as per item No 84 above but, except brick using old retrieved bricks obtained from demolition in serviceable conditions complete all as specified and directed.
M & L 15 mm thick rendering in CM 1:4 on fair faces of bricks/concrete, finished even & smooth without using extra cement and mixed with water proofing compound (liquid type) @ 200 ml per 50 Kg of cement, complete all as specified and directed by Engineer-in-Charge. (Note : WPC (liquid type) shall be measured and paid separately as supply only)
Supply only water proofing compound complete all as specified and directed.
M&L for 15mm thick rendering other than fare face of brick/stone masonry walls in CM 1:6 finished complete all as specified and directed.
M&L for 15mm thick rendering on fare face of brick/stone masonry walls in CM 1:4 finished complete all as specified and directed.
M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper with roller over one coat of primer white or tinted as approved complete all as specified and directed.
M&L for preparation of new plastered surfaces on walls and applying two coats of exterior emulsion paint (weather coat) with roller over a coat of primer white or tinted as approved all as specified and directed.
Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each including all hard ware fitting complete all as specified and directed.
Taking down chowkhat or frames with shutters(without taking off shutters from the frame) n. exc 1.5 Sqm each including iron mongories complete all as specified and directed.
Taking down chowkhat or frames with shutters(without taking off shutters from the frame) exc 1.5 Sqm but n'exc 4 Sqm each including iron mongories complete all as specified and directed.
S&F 30mm thick Flush Shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
M&L for Preparation of new wooden surfaces and applying two coat of synthetic enamel paint over one coat of pink primer of any description, not otherwise described, over 10cm width or girth complete all as specified and directed.
S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc (minimum thickness of powder coating 50 micron) complete all as specified and directed by Engr-in-Charge.
S&F powder coated aluminium door shutters aluminium section weight 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws (Thickness of powder coating not less than 50 micron) etc complete all as specified and directed by Engr-in-Charge.
S&F powder coated aluminium window and ventilator shutters, side hung type without sash bar, aluminium sections weight 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws (Thickness of powder coating not less than 50 micron) etc complete all as specified and directed by Engr-in-Charge.
S&F 4mm thick ACP (Aluminium composit panel) of any colour fixed to door with necessary rubber gasket and aluminium snap beadings tint match with existing complete all as specified and directed by Engr-in-Charge.
S&F 5mm thick tinted glass fixed with necessary rubber gasket and aluminium snap beadings tint match with existing complete all as specified and directed.
S&F Factory made solid PVC Moulded door shutter (with Wood free EPS), 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face complete all as specified and directed.
S & F solid PVC moulded door frame of size 50 mm x 47 mm made out of 5 mm thick PVC sheet (shade matching with door shutter) reinforced with MS Square tube and edges will be painted to match with printed sheet complete all as specified and directed.
S&F 100 mm long powder coated Aluminium tower bolt, tint existing to match complete all as specified and directed.
S&F 150 mm long powder coated Aluminium tower bolt, tint existing to match complete all as specified and directed.
S&F 150mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F 150mm long Aluminium handles, cast type anodised, complete all as specified and directed.
S&F 100 mm long powder coated Aluminium handles, tint existing to match complete all as specified and directed.
S&F for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed and specified
S&F in repair for 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staples(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or csat aluminium alloy complete all as directed and specified
S&F 75 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as directed and specified
S&F 100 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as directed and specified
S&F in repair cast iron body, door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.
S&F in repair double action floor spring hydaulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty including necessary cutting to floor and concrete work complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including Dismantling of existing Plain or corrugaaated steel sheeting/AC Sheet complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including Dismantling of existing Plain or corrugaaated steel sheeting/AC Sheet complete all as specified and directed.
Dismantling mild steel work of any description not otherwise provided for complete all as specified and directed
S&F Roof trusses (framed), trussed, purlins, crane gantries,rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410-W (Gde-E-250) quality-A complete all as specified and as directed (Make : ISI Marked as approved by GE)
M&L for MS work for wind tie in roofs and similar work including securing bolts, drilling hole etc confirming to Fe- 290 Gde E-165 complete all as specified and directed.
M&L for Preparing new steel and iron surface of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.
M&L for Preparing new steel and iron surface of any description n.exc over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.
M&L for preparing old decorated plastered or unplastered surfaces of walls and applying one coat of white wash complete all as specified and as directed.
M&L for preparing old decorated plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.
M&L for Preparing old decorated plastered or unplastered surfaces of external walls and applying one coat of exterior emulsion paint (weather coat) with roller as approved including filling the cracks and depressions with putty / POP to make the surface even and smooth matching to the adjacent wall surfaces complete all as specified and directed.
M&L for Preparation of old surface of wall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including filling the cracks and depressions and applying one coat of distemper oil emulsion with roller white or tinted as approved complete all as specified and directed.
M&L for Preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for Preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
S&F in repair for 4mm thick HPSC pre-prime non absestos fibre cement building board (E-classic) decorative finish fixed to existing Aluminium/GI frame work at any position matching to existing including re-fixing false ceiling lights, electric fittings/fixture etc complete all as specified and directed.
S&F in repair chromium plated fency type 15mm bore Two way bib tabs cast copper alloy with capston head handle screwed down screwed for iron pipe or for brass ferrule & fixed in 15 mm bore pipe complete all as specified and directed.
Taking down carefully aluminum /copper point wiring (light, fan, switch & power) complete including fittings such as switches, ceiling rose, pendent, by unscrewing from board ,out let box, fitting and fixture such as bulk head fitting, sketch fittings and making good the disturbed rurfaces of walls floors etc all as directed.
M&L for point wiring with stranded copper conductor 1.5. Sqmm 1100 Volts grade FRLS PVC insulated and unsheathed including ISI marked PVC casing capping of required sizes as indicated including all accessories, copper conductor cable 1.5 Sqmm insulated and unsheathed PVC cables as earth wire, trminal boxes closed recossed type. PVC Plastic board all as required as specified and directed for the following :- (a) One light/ Fan point controlled by one way switch.
(b ) One 5 Amps switch socket combination on independent board.
(c) One 5 Amps socket on same board with other switches.
All as per item No-135 here in above but 2.5 Sqmm stranded copper conductor and independent board for 15 Amps switch/ socket point as directed.
S&F switch piano flush type single pole one way 5 Amps 230 V ISI marked complete all as specified and directed.
S&F switch socket out let 3 pin 5 Amps flush type 230 Volts multipurpose, ISI marked complete all as specified and directed.
S&F switch socket out let 5 Amps and 15 Amps multipurpose( 3 Pin 15 Amps and one pin 5 Amps controlled by one switch.) ISI marked complete all as specified and directed.
S&F in repairs fan regulator Electronic Step type (min 5 steps) 2module, 100W ISI marked by removing old u/s resistance type fan regulator including necessary connection in existing laminated switch board by making necessary holes etc., complete all as specified and directed.
S&F in repairs lamp holder insulated body with back plate for battern fittings complete all as specified and directed.
M&L for sub main wiring in replacement using two single core PVC insulated, unsheathed stranded copper conductor cable of size 4 Sqmm FRLS of voltage rating 1100 Volts drawn in and including surface in PVC casing caping with standard accessories, along-with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 4 Sqmm as earth continuity conductor complete all as specified and directed. NOTE: Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit.
M&L for sub main wiring in replacement using two single core PVC insulated, unsheathed stranded copper conductor cable of size 6 Sqmm FRLS of voltage rating 1100 Volts drawn in and including surface in PVC casing caping with standard accessories, along-with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 6 Sqmm as earth continuity conductor complete all as specified and directed. NOTE: Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit.
M&L for sub main wiring in replacement using two single core PVC insulated, unsheathed stranded copper conductor cable of size 4 Sqmm, FRLS of voltage rating upto and including 1100 Volts drawn in existing conduit along-with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 4 Sqmm as earth continuity conductor complete all as specified and directed. Note:- Two run of single core PVC cable with one run of earth conductor shall be measured as one unit.
M&L for sub main wiring in replacement using two single core PVC insulated, unsheathed stranded copper conductor cable of size 6 Sqmm FRLS of voltage rating upto and including 1100 Volts drawn in existing conduit along-with one run of PVC (Green colour) insulated , unsheathed, stranded copper conductor of size 6 Sqmm as earth continuity conductor complete all as specified and directed. Note:- Two run of single core PVC cable with one run of earth conductor shall be measured as one unit
Supply, fixing, connecting & testing in repair of sheet metal enclosures single pole and neutral with a two pin earth plug and socket complete with one single pole 20 amp MCB complete all as specified and directed.
Supply, fixing, connecting & testing in repair of sheet metal enclosures (IP-54 Protection) triple pole and earth with three pin earth plug and socket complete with one TPN 32 Amp MCB complete all as specified and directed.
Supply, fixing, connecting & testing in repair of sheet metal enclosures double door (IP-42 Protection), triple pole and neutral, 4 way DBs for using MCBs / MCB isolators with having aluminium bus bars suitable for 200 Amps rating complete all as specified and directed.
All as per item No.144 here-in-before but distribution board single pole and neutral, 12 waycomplete all as specified and directed.
All as per item No.144 here-in-before but distribution board single pole and neutral, 8 way complete all as specified and directed.
All as per item No.144 here-in-before but distribution board single pole and neutral, 4 way complete all as specified and directed.
Supply and fixing in replacement of LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed by Engr-in-charge.
All as per item No. 148, but LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.
All as per item No. 148, but LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.
Supply& Fixing in replacement of LED Batten fittings 1x20 Watt complete with round block etc, incl PVC gutties and flexible wire and connecting to ceiling rose complete all as specified and directed.
Supplying and fixing in replacement of decorative surface mounting 36 watt LED full out put luminaries which provides soft light glare free symmetrical illumination suitable for Armstrong/Grid ceiling, white powder coated sheet steel housing with paralite P5 square parabolic louver block in metallic perforated frame for low glare, aluminium reflector and accessories ,connecting the same to electric source with and including copper conductor 23/0.0076 flexible twisted twin core cable , including all accessories and fixing arrangements for fixing the 2x2 LED light fitting to false ceiling complete all as specified and directed.
S&F in replacement of 10 Watt LED bollard light one meter long with Opel acrylic diffuser and IP-65 protection including necessary PCC base work complete all as specified and directed.
Supply and fixing in replacement of post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.
S & F in replacement of LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed .
Supply and fixing in replacement of LED building security/street light light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
J.N.R. Engineers and Builders
M/S NIRMAL SINGH DHANJAL
m/s vikash Engineers
lodhi builders
M/S LAKSHYA CONSTRUCTIONS
M/s Manish Contractor
M/s Sagar Construction
M/S YOGANSH CONSTRUCTION CO.
SHRI RAM CONSTRUCTION
M/s Anjali Construction
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .