Kuldiha Railway station to Deuli_Road_SDBC_0.000 to 0.300 0.371 to 1.623 2.222 to 4.757 5.157 to 6.215 7.442 to 7.635 7.979 to 8.981 9.004 to 9.315

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material

Providing, laying, spreading and compacting graded stone aggregates to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant, carriag of mixed material by Tiper to site, laying in uniform layers with paver in sub base/base course on wel prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H specification for Road and Bridge works (4th Revision)

Providing & applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means as per clause 502 of MOSRT&H Specifications for Road & Bridges work (4th Revision)

Providing and applying Tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm. on the prepared bituminious/ granular surface cleaned with mechanical brooms as per clause 503 of MORTH & H specification for road and bridge works ( 4rth Revision ) etc. complete as per the direction of the Engineering in charge.

Providing and laying semi dense bituminious concrete with batch type hot mix plant using crushed aggregates of specified grading , premixed with bitumininious binder of 60/70 penetration grade of bitumen , transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade , level and allignment , rolling with smooth wheeled , vibratory and tandom rollers to achieve the desired compaction as per clause 508 of MOSRT & H Specificaion for road and bridge works ( 4rth Revision ) etc. complete as per specification and direction of the Engineering in charge

Conveying from stacks and spreading moorum on road surface to proper thickness and camber for topping including cost and carriage of materials etc.complete as per direction of Engineer in charge