REPAIR AND REPLACEMENT OF ELETRIC WIRING, LIGHT FITTINGS AND CONNECTED E/M ITEMS UNDER MANEKSHAW MARG SERVICE CENTRE UNDER GE (EAST) DELHI CANTT-10

Amount

Taking down/ out carefully copper/aluminium point wiring for light/fan/bell/ sockets 5/15 Amps complete alongwith accessories as switches,Sockets, holders,ceiling roses,light fitting regulators etc ( to be measured separately) and making good the disturbed surface all as directed.

Taking down switch, socket, fan regulator, ceiling rose, lamp holder etc of any type and capacity from independent locations and making good the surfaces all as directed by Engr -in- Charge.

M&L for point wiring with single core fire retardant low smoke PVC insulated, unsheathed multi stranded copper conductor of size 1.5 sqmm alongwith 1.5 sqmm earth wire of multi strand copper conductor (with same specification) connected to common earth dolly and drawing through existing surface/concealed conduit pipe and in existing MS box/modular box covered with existing hylem sheet / modular plate (top cover) for mounting switches, sockets or fan regulators etc for the following :-

(a) One light point/ fan point/ bell point controlled by one switch

(b) One socket outlet 5 Amps controlled by one switch on same board

(c) One socket outlet 5 amps controlled by one switch on independent board

(d) one light point controlled by two 2 way switches

All as per item No.2 here in before but wiring with 2.5sqmm copper wire and 2.5sqmm earth wire for socket out let on independent board.

S&F switch piano flush type, 6 amps one way,SP,230 volts AC all as directed.

S&F switch piano flush type, 6 amps two way,SP,230 volts AC all as directed.

S&F switch piano flush type, 16 amps one way,SP,230 volts AC all as directed.

S&F switch piano bell push flush type, 6 amps one way,SP,230 volts AC all as directed.

S&F socket outlet 6 amps 5 pin , all as directed.

S&F socket outlet 6&16 amps 6 pin all as directed.

S&F piano type Step fan regulator, 120 watts single/ double module all as directed.

S&Fmodular switch flush type, 6 amps one way,SP,230 volts AC all as directed.

S&F modular switch flush type, 6 amps two way,SP,230 volts AC all as directed.

S&F modular switch flush type, 16 amps one way,SP,230 volts AC all as directed.

S&F modular switch bell push flush type, 6 amps one way,SP,230 volts AC all as directed.

S&F modular socket outlet 6 amps 5 pin 2 module all as directed.

S&F modular socket outlet 6 & 16 amps 6 pin multipurpose combined 2 module all as directed.

S&F modular Step Fan regulator, 120 watts single / double module all as directed.

S&F Modular cover plate with frame 1 module all as directed

S&F Modular cover plate with frame 2 module all as directed

S&F Modular cover plate with frame 3 module all as directed

S&F Modular cover plate with frame 4 module all as directed

S&F Modular cover plate with frame 6 module all as directed

S&F Modular cover plate with frame 12 module all as directed {Make for item No. 11 to 23 : Indoasian ( Elvira / Glint ) or Legrand ( Myrius/ Arteor) or Schneider (Livia)}

S&F in repair Modular Metal Flush Box 1/2 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed

S&F in repair Modular Metal Flush Box 3 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed

S&F in repair Modular Metal Flush Box 4 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed

S&F in repair Modular Metal Flush Box 6 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed

S&F in repair Modular Metal Flush Box 12 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed

Supply and fixing in replacement of lamp holder PVC/ Polycarbonate type insulated body with back plate suitable for batten fittings complete all as specifed and as directed. Make : Anchor/SSK/Cona.

Supply and fixing in replacement of Ceiling rose, insulated body, 3 terminal, 240 volts complete all as specified and as directed. Make : Anchor/SSK/Cona.

Supply and fixing in replacement of electric bell of DINGDONG type, 6 Amps, 240 volts, single pole and making all necessary connections complete all as directed. Make : Anchor/SSK/Cona/GM.

Material and labour for replacement of submain wiring complete with 2 x 4.0 sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 4 sqmm( same specification ) as earth wire in existing PVC conduit complete all as directed.Make : Polycab/Havells/Finolex.

Material and labour for replacement of submain wiring complete with 2 x 10.0 sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 10 sqmm( same specification ) as earth wire in existing PVC conduit complete all as directed.Make : Polycab/Havells/Finolex.

Material and labour for replacement of submain wiring complete with 2 x 16.0 sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 16 sqmm( same specification ) as earth wire in existing PVC conduit complete all as directed.Make : Polycab/Havells/Finolex.

Supply and fixing in replacement of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed. Make : L&T / Legrand Lexic/ Indoasian/Havells.

Supply and fixing in replacement Isolator SPN 40 A including connections complete all as specified Make : L&T / Legrand Lexic/ Indoasian/Havells.

Supply and fixing in replacement Isolator SPN 63 A including connections complete all as specified Make : L&T / Legrand Lexic/ Indoasian/Havells.

All as srl item no 37 here in before but of 40 amps capacity and TPN type.

All as srl item no 37 here in before but of 63 amps capacity and TPN type.

All as srl item no 37 here in before but of 100 amps capacity and TPN type.

Supply and fixing in replacement of Modular AC Socket with 25 Amps SP mini MCB, 230 Volts, 50Hz. In 4 module sheet metal enclosure complete all as specified and as directed. Make : Anchor / Havells / Legrand/ Indoasian

Supply and fixing of PVC casing & caping ( ISI marked) 20 mm width double lock type inclusive of all fittings such as tees, bends, elbow, etc and all fixing accessories such as couples,Pvc Rawal Plugs, saddles, etc complete all as directed.

Supply and fixing of PVC casing & caping ( ISI marked) 25 mm width double lock type inclusive of all fittings such as tees, bends, elbow, etc and all fixing accessories such as couples,Pvc Rawal Plugs, saddles, etc complete all as directed.

S&F in replacement of rigid non metallic PVC conduit 20 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete surface mounted / concealed and making good the surface all as specified and and as directed. Make Kalinga/Plaza/Finolex.

S&F in replacement of rigid non metallic PVC conduit 25 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete surface mounted / concealed and making good the surface all as specified and and as directed. Make Kalinga/Plaza/Finolex.

Supply and fixing in replacement of wall light fitting comet type suitable for LED lamp complete all as directed. Make :Philips cat part No.30575 or Wipro Garnet or Havells Floret/Stylo

Supply and fixing in replacement of LED bed side light, 5/6 Watts, wall mounted type and making all electric connections complete all as specified and directed.

S & F in replacement LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 20 Watts, cool/warm white as per site requirement complete all as specified and directed.. Make : Havells/Bajaj/Philips/Wipro/Syska / Fiem/Polycab

S & F in replacement of LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 10 Watts, cool/warm white as per site requirement complete all as specified and directed.. Make Havells/Bajaj/Philips/Wipro/Syska / Fiem/Polycab

S&F in replacement of bulk head fitting 6.5 W with PMMA diffuser complete all as specified and directed. Make:- Havells/Phillips/Bajaj/ Crompton/Syska/Polycab

Supply and fixing in replacement of LED ceiling light fitting 15 watt, in round shape, surface/recess type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed. Make :Make:-Havells/Bajaj/Philips/Wipro/Syska/Fiem/Polycab

Supply and fixing in replacement of LED ceiling light fitting 10 watt, in round shape, surface/recess type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed. Make :Make:-Philips/Wipro/Havells/Fiem/Bajaj/Syska/Polycab.

Supply and fixing in replacement of LED ceiling light fitting 6 watt, in round shape, surface/recess type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed. Make :Make:-Havells/Bajaj/Philips/Wipro/Syska/Fiem/Polycab

Supply and fixing in replacement of light fitting comprising of milky white PVC globe dia 200 mm and gallary suitable for mounting on 32/40 mm GI pipe suitable for LED lamp and B22 base including necessary electric connections complete all as specified and as directed. Make : Havells/Bajaj/Philips/Wipro/Syska/Fiem/Polycab

Supply and fixing in replacement of LED post top lantern fitting powder coated aluminium die cast and spun aluminium with clear/opal diffuser 25 Watt incl LED driver with gallary suitable for mounting on 32/40 mm GI pipe including necessary electric connections complete all as directed. Make : Havells/Bajaj/Philips/Wipro/Syska/Fiem/Polycab

S & F in replacement of LED Bollard Fittings 10W suitable for pathway lights incl making electric connections complete all as specified and directed. Make:- Halonix/Havells/Jaquar/Syska/Polycab

S & F in replacement of energy efficient LED fittings 45W LED suitable for building security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as directed. Make : Havells/Bajaj/Philips/Wipro/Syska/Fiem/Polycab

Supply and fixing in replacement of area lighting LED flood fitting 120W complete all as specified and as directed. Make Syska/Bajaj/Havells / Wipro/Polycab

Supply and fixing in replacement of suspended architectural 40 W LED luminaire provides soft light and glare free symmetrical illumination ( with continuous mounting end cap ) fittings, complete all as specified and as directed. Make Havells /philips/Wipro/ Bajaj/ Crompton

S & F in replacement garden light pole GI pipe medium grade 40mm dia cut to length,suitable for fixing of garden light fitting including painting with black synthetic enamel paint (2 coat) over a coat of red oxide primer complete all as specified and directed.

Supply and fixing in replacement of street light fitting bracket, 1.0 mtr long made out of galvanized iron pipe of 32 mm dia size light grade complete with nut, bolts, washer, clamps etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed.

Supply and fixing in replacement of Ventilating fan 250 mm sweep plastic body type including self cosing louver and making all electric connections complete all as directed. Make : Havells/Crompton/Bajaj /Orient (Note: Old U/S BER fan shall be deposited to MES store yard)

Supply and fixing in replacement of Ventilating fan 200 mm sweep plastic body type including self cosing louver and making all electric connections complete all as directed.Make : Havells/Crompton/Bajaj /Orient (Note: Old U/S BER fan shall be deposited to MES store yard)

Supply and fixing in replacement of Wall Mounted Fan 400 mm sweep plastic body type including making all electric connections and depositing the old u/s to MES store yard complete all as directed.Make :Havells /Crompton/Bajaj/Orient (Note: Old U/S BER fan shall be deposited to MES store yard)

Supply and fix in replacement of motor copper wound with threaded PVC cover suitable for 200/250mm ventilation fan complete all as specified and as directed.

M&L for rewinding of exhaust fan(300mm)/wall mounting fan(400mm) with super enamelled copper wire of required size duly varnishing including greasing/oiling and commissioning/testing to the entire satisfaction of Engineer-in-charge.

M&L for rewinding of exhaust fan(380/450mm) with super enamelled copper wire of required size duly varnishing including greasing/oiling and commissioning/testing to the entire satisfaction of Engineer-in-charge.

M&L for rewinding of Ceiling fan 1200/1400mm sweep with super enamelled copper wire of required size duly varnishing including greasing/oiling and commissioning/testing to the entire satisfaction of Engineer-in-charge.

Supply and fixing exhaust fan upto 225 mm sweep metalic body type and making all electric connections complete all as directed and depositing the old U/s item to MES store yard.Make Bajaj /Havells/Crompton/Orient (Note: Old U/S BER fan shall be deposited to MES store yard)

S & F in replacement plastic body capacitor of capacity 2.5 mfd with wire suitable for single phase motor and making connection complete all as specified and directed Make : Surya/Usha/TIBCON/Havells

All as per Srl item No 70 above but 3.15 mfd capacity. Make : Surya/Usha/TIBCON/Tibcap

All as per Srl item No. 70 above but 4.0 mfd capacity. Make : Surya/Usha/TIBCON/Tibcap

S&F in replacement of ball bearing No 6201/6202 suitable for ceiling fan complete all as specified and directed. Make Usha/NBC/SKF.

M & L for ceiling fan down rod fabricated out of MS pipe medium grade 15 mm dia cut to length as per site requirement duly painted white with synthetic enamel paint over a coat of red oxide primer having through hole and cut of suitable size at both end for fixing ceiling fan and clamp etc complete all as specified and as directed

S&F MS clamp with rubber real including nut, bolt and split suitable for ceiling fan to hook complete all as specified and as directed.

S&F PVC Gang Box suitable for one No 5 Amps Switch and one No 5 Amps Socket complete all as specified and as directed. Make : Presto plast/Pressfit/Polyplast.

S&F PVC Gang Box suitable for two No 5 Amps Switch and two No 5 Amps Socket complete all as specified and as directed. Make : Presto plast/Pressfit/Polyplast.

S&F PVC Gang Box suitable for one No 15 Amps Switch and one No 15 Amps Socket complete all as specified and as directed. Make : Presto plast/Pressfit/Polyplast.

S&F Steel fastneer of 4" long and 8mm dia with Nuts & washer complete all as specified and as directed.

S & F in replacement of MCCB, 415 volts, three pole of cap 100/125 Amps, 10 KA, ICS = 100% ICU, with Thermal - Magnetic Release, including necessary spreader / thimbles of suitable size and making connections complete all as directed. Make : C&S/Havells/Legrand/Siemens/L&T

All as per item No. 80 here in before but of capacity 160 Amps, 25 KA.

All as per item No. 80 here in before but of capacity 200 Amps, 36 KA.

S & F in replacement of aluminium cable 1100 Volt grade, served with inner sheathing of PVC tape and overall PVC sheathed twin core cable circular of size 4 Sqmm ISI marked in service connections, including taking down old unserviceble cable complete all as directed. Make:- Polycab/Havells/Plaza/Finolex.

All as per srl item no. 83 here-in-before but with 6.0 sq mm ISI marked in service connections, including taking down old unserviceble cable complete all as directed.Make : Polycab/Havells/Plaza/Finolex.

S & F in replacement of plug top 3 pin 10/20 amp earth metal clad suitable for industrial type DB complete all as directed. Make : Anchor/HPL/C&S/Standard.

S & F in replacement of socket 3 pin 10/20 amp earth metal clad suitable for industrial type DB complete all as directed. Make : Anchor/HPL/C&S/Standard.

S&F PVC top, 3 pin 15 Amps, 230 Volts, 50 Hz. Make : Anchor/Cona/Kinjal.

S&F in replacement of Recess/Surface mounting 2x2 square flat panel ultra slim scoop LED light 36 W warm/cool white with driver/transformer etc suitable for Grid ceiling/Gypsum board/POP ceiling incl making electric connection complete as as directed. Make: Syska/havels/philipsCrompton/Polycab/Fiem

Supply and fixing in replacement of 'T' cover Bakelite sheet 2 mm thick in round shape complete all as specified.

Supply and fixing in replacement of Bakelite sheet 3mm thick of size 5"x5" duly wire cut for switches, sockets, regulator etc as per site requirement as directed.

S&F in replacement of Bakelite sheet 3mm thick of size 8"x5" duly wire cut for switches, sockets, regulator etc as per site requirement as directed.

S&F in replacement of Bakelite sheet 3mm thick of size 8"x10"duly wire cut for switches, sockets, regulator etc as per site requirement all as directed.

S&F in replacement of Bakelite sheet 3mm thick of size 10"x12" duly wire cut for switches, sockets, regulator etc as per site requirement all as directed.

Taking down old unserviceable LT U/G cable any size and core complete all as specified.

S&F XLPE insulated armoured heavy duty U/G aluminium conductor cable served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and overall PVC sheathed of size 10 Sqmm 2 core. Make:Polycab/Gloster/Havells/Plaza/Finolex.

All as per item sl No 95 but 16 sqmm, 2 core.

All as per item sl No 95 but 16 sqmm, 4 core.

All as per item sl No 95 but 25 sqmm, 4 core.

All as per item sl No 95 but 50 sqmm, 3 1/2 core.

Excavation in trenches in soft / loose soil not exceeding 1.5 meter depth and not exceeding 1.5 meter wide and getting out including trimming of sides complete all as directed.

Material and labour for brick protection to cable using old size class 'B' bricks, laid flat, dry butt jointed, laid lengthwise perpendicular to the axis of cable complete all as directed.

Material and labour for sand cushioning with a layer of fine sand 8 cm thick before laying the cable and 15 cm after laying the cable in trenches to cover under ground cable complete all as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as directed.

Removal of excavated material n exc 50m and depositing n exc 1.5m above starting point complete all as specified and as directed..

M&L Cement concrete in foundations, filling and mass conc in ratio 1:2:4 type B1 with 20mm stone graded complete all as specified.

S&F Galvanised Steel tubing light grade of size 50mm bore. Make : Prakash/Jindal/TATA.

Supply and fix in replacement Industrial Switchgear Busbar Chambers, current rating 100 Amps, 4 Way with 04 Nos copper busbar complete all as sfd. Make : Havells/Legrand/ Siemens/L&T

Supply and fix in replacement Industrial Switchgear Busbar Chambers, current rating 200 Amps, 4 Way with 04 Nos copper busbar complete all as sfd. Make : Havells/Legrand/ Siemens/L&T

Supply and fix in replacement Industrial Switchgear Busbar Chambers, current rating 400 Amps, 4 Way with 04 Nos copper busbar complete all as sfd. Make : Havells/Legrand/ Siemens/L&T

Supply and fix in replacement of Sheet Metal MCCB box with top cover suitable for fixing MCCB, 3/4 Pole Upto 400Amps. Note : MCCB will be measured and paid separately.

S&F in replacement of electronic driver 36/40W suitable for 2x2 Led ceiling Lights complete all as specified and as directed. Make : Philips/Havells/Crompton.

S&F in replacement of MCB DB confirming to IP 43 - IK 09 with double door, SPN 16 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces. Make : Havells/Legrand/Siemens /Indoasian

S&F in replacement of MCB DB confirming to IP 43 - IK 09 with double door, SPN 08 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces. Make : Legrand/Siemens/Indoasian

S&F in replacement of MCB DB confirming to IP 43 - IK 09 with single door, SPN 04 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces. Make : Legrand/Siemens/Indoasian

Supply and fixing in replacement of MCCB incommer Distribution Board ( Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections and taking out the old unserviceable DB complete all as directed. Make : Legrand/Havells/Indoasian Note:- MCCB & MCBs will be measured and paid separately

S&F in replacement of TPN DB 04 way double door confirming to IP43 & IK 09 protection complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces. Make : Legrand/Havells/Indoasian

Supply and fixing in replacement of Geyser 25 ltre capacity vertical type with steel tank and glass inner linen , 5 star rating complete including taking down the old u/s geyser and depositing to MES store yard complete all as specifed and directed. Make Bajaj / Havells / Crompton / Venus (Note: Old U/S BER Geyser shall be deposited to MES store yard)

Supply and fixing in replacement of heating element 1.5/2 KW capacity round/triangular type for geyser of any type/Make and capacity including making necessary electric connections and testing the geyser complete all as directed. Make : Dasspass/Theeta/Venus/Bajaj. Note : The petty items such as nut, bolt, clamps etc are deemed to be included in quoted rates.

Supply and fixing in replacement of heating element 1.5/2 KW capacity banana type for geyser of any type/Make and capacity including making necessary electric connections and testing the geyser complete all as directed. Make : Dasspass/Theeta. Note : The petty items such as nut, bolt, clamps etc are deemed to be included in quoted rates.

Supply and fixing in replacement of heating element 1.5/2 KW capacity round/square type having provision for thermostat inside for geyser of any type/Make and capacity including making necessary electric connections and testing the geyser complete all as directed. Make : Dasspass/Theeta. Note : The petty items such as nut, bolt, clamps etc are deemed to be included in quoted rates.

Supply and fixing in replacement of thermostat ISI marked for geyser of any type/Make and capacity as per sample, including making necessary electric connections and testing the geyser complete all as directed. Make : Dasspass/Theeta/Bajaj/Venus

M &L in replacement Stainless steel Geyser tank 25/35 Ltr capacity suitable for fixing in 6/9 nut base plate assembly complete all as specified and directed.

M &L in replacement Stainless steel Geyser tank 50 Ltr capacity suitable for fixing in 6/9 nut assembly complete all as specified and directed.

M &L in replacement of base plate assembly of 6/9 holes suitable for fixing on a geyser tank 25/35/50 Ltr capacity incl Nuts & rubber packing for water tight joint complete all as specified and directed.

Supply and fixing in replacement of steel wired connection 600mm long and C P brass adopter suitable for 15mm dia stop cock with washer for geyser of any type/Make and capacity complete all as directed.

Supply and fixing in replacement of CP non return valve in position internally screwed on one end and externally screwed on other ends, suitable for iron pipe of size 15mm dia, suitable for geyser of any type/Make and capacity complete all as directed.

Supply and fixing in replacement of fuseable type pressure valve, suitable for geysers of any type/Make and capacity complete all as directed.

Supply and fixing in replacement of indicator lamp red/green suitable for geyser of any type/Make and capacity including making necessary electric connections and testing complete all as directed.

M&L for soldering & brazing of inner copper tank of size 25/35/50 Ltrs and refixing it into the geyser complete all as specified.

Supply and fixing in replacement of high pressure booster pump with 8 ltr capacity pressure tank, coupled with electric motor of capacity 0.50 HP, 230 volts, single phase, 50 Hz incl Pressure Guage, Pressure switch & connecting accessories of GI i.e bend, nipple, socket, tee of requisite size etc incl cutting of existing pipe complete all as directed. Make: Usha/Crompton/V Gard/Khaitan/CR/Leader/Accord

Supply and fixing in replacement of high pressure booster pump with 8 ltr capacity pressure tank, coupled with electric motor of capacity 0.93/1 HP, 230 volts, single phase, 50 Hz incl. Pressure Guage, Pressure switch & connecting accessories of GI i.e bend, nipple, socket, tee of requisite size etc incl cutting of existing pipe complete all as directed. Make: Lubi/Crompton/V Gard/Khaitan/CR/Leader/Accord.

M&L in replacement for pressure cylinder of capacity 8L suitable for 0.5 to 1 HP Booster pump complete all as specified.

S & F in replacement of Pressure Guage 50mm dia suitable for pressure vessel radial. 0-180 Psi Pressure Range complete all as specified and directed. Make:- Fiebig/AE

S&F in replacement of 5 port Brass Splitter Manifold Distributor 1 inch 1/4" for pressure Vessel Expansion suitable for Booster Pump upto 1 Hp capacity complete all as specified and directed.

S&F in replacement Booster Pump relay SK9/ PM5 type, 240 Volts, 50Hz suitable for 0.5HP to 1 HP booter pump complete all as sfd. Make:- Danfoss/Zerodis

S&F in replacement Booster Pump relay KP 35/36, 240 Volts, 50Hz suitable for 0.5HP to 1 HP booter pump complete all as sfd. Make:- Danfoss

S & F in replacement spring loaded non-return valve/Check valve of suitable size for fixing in suction line of booster pump upto 1 HP capacity complete all as specified.

S & F in replacement of PVC flexible pipe 20mm dia complete all as specified and directed.

S& F in replacement of Static Energy Meter single phase electronic type with LCD display of capacity 10-60A including connection with seal and sealing wire including taking out the old u/s and depositing to MES store yard complete all as specified and as directed Make Benlo/L&T/Havells/HPL

Material and labour for earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground not less than 2.25 mtrs below ground level with top edge of plate not less than 1.5 mtr deep below normal ground level connected to galvinised earth wire 4 mm by means of nuts, bolts and check nut to earth plate and to main board or DB including necessary PCC 1:2:4 type B-1 pit, cover frame , GI pipe 15 mm dia light grade for protection and GI pipe 20 mm dia medium grade for watering with funnel, wire mesh, salt and charcoal dust all over the plate all as specified and as directed.

Taking down Window/Split Type Air Conditioner of any make, size of 1.5/2 Ton capacity from existing site including provisioning of dismantling all electrical items/connected parts such as relay capacitor, compressors grills etc and spray cleaning by means of electric air blower and water descaling by using acid on both side of cooling coil and condenser cleaning with nylon brush and washing with clean water to ensure proper cleaning before reassembling complete unit and refixing at site including testing and commissioning complete all as specified & as directed at site to the entire satisfaction of GE. Note :- (a) Parts found defective after dismantling of ACs requiring replacement will be measured and paid separately under relevant items described here in after however other parts required for dismantling/reassembling of the ACs will be deemed to be included in the quoted rate.

Material and labour for replacement of rotary type compressor for window type AC cap 1.5 TR Make and type as per existing compressor making suction pipe and discharge pipe connections with copper welding/brazing making it leak proof. Pressure testing vacuuming and charging of refrigerant, complete all as specified and as directed. Make LG/ Voltas

Material and labour for replacement of rotary type compressor for Split AC cap 1.5 TR Make and type as per existing compressor making suction pipe and discharge pipe connections with copper welding/brazing making it leak proof. Pressure testing vacuuming and charging of refrigerant, complete all as specified and as directed. Make LG / Voltas

Material and labour for replacementof rotary type compressor for Split AC cap 2 TR make and type as per existing compressor making suction pipe and discharge pipe connections with copper welding/brazing making it leak proof. Pressure testing vacuuming and charging of refrigerant, complete all as specified and as directed.Make LG/Voltas

Material and labour for replacement of starting relay 3 or 4 terminal with connecting leads suitable for any type and make of window / Split air conditioner of 1.5 / 2 Ton capacity, complete all as specified and as directed.

Material and labour for detecting leakage in window type/Split AC’s cap 1.5/2 TR by pressure testing and making it leak proof by copper welding/brazing, vacuuming and charging of refrigerant any type as per previous to pressure as per manufacturer specification complete all as specified & directed

Material and labour for replacement of front grill suitable for any type and make of window air conditioner 1.5 T R capacity having good aesthetic look good quality complete all as specified and as directed.

Material and labour for replacement of double shaft fan motor 1/5 HP for Window AC 1.5 TR Make and type as per existing motor, complete all as specified and as directed.

Material and labour for replacement of single shaft fan motor 1/5 HP for Split AC 1.5 / 2 TR Make and type as per existing motor, complete all as specified and as directed.

Material and labour for replacementof capacitor Running Cap 36 to 45 Mfd suitable for operating voltage 240 Volt, 50 HZ, complete all as specified and as directed.Make : Surya/Usha/TIBCON/Tibcap

Material and labour for replacement of starting capacitor 80-100 Mfd, complete all as specified and as directed. Make : Surya/Usha/TIBCON/Tibcap

Material and labour for replacement of starting capacitor 120 Mfd, complete all as specified and as directed. Make : Surya/Usha/TIBCON/Tibcap

Material and labour for replacement of blower motor capacitor 6 mfd suitable for operating voltage 240 volt, 50 HZ, complete all as specified and as directed.Make : Surya/Usha/TIBCON/Tibcap

Material and labour for replacementof air filter element for 1.5 / 2 ton window/ Split type air conditioner of any make and type as per sample, complete all as specified and as directed.

Material and labour for replacement of thermostat suitable for any type and make of window/ Split type Air conditioner 1.5/2 ton capacity, complete all as specified and as directed.Dasspass/Theeta/ Denfos / Indfos

Material and labour for replacement of blower motor 0.5 HP with blower blade assembly complete in all respect for operating voltage 240 volts, 50 HZ and for any type or make of split air conditioner of 1.5/2 ton capacity, complete all as specified and as directed.

Material and labour for replacement of swing motor assembly complete in all respect for operating voltage 240 volts 50 HZ and for any type and Make of window /Split type air conditioner of 1.5/2 Ton capacity, complete all as specified and as directed.

Disconnecting electrical connection and taking down/removing unserviceable single phase voltage stabilizer 4 KVA or 5 KVA capacity of any make for repair /servicing /cleaning /maintenance and then reconnecting in postion after repair. Parts for repair to measured separately under respective items

Supply and fixing in replacement of cut off relay for any type of make voltage stabilizer 4/5 KVA of any type and make, complete all as specified and as directed.

Supply and fixing in replacement of electronic (PCB) for circuit plate for voltage stabilizer 4 KVA or 5 KVA capacity of any make and type, complete all as specified and as directed.

Supply and fixing in replacement of Volt meter for voltage stabilizer 4 KVA or 5 KVA capacity of any make and type, complete all as specified and as directed.

Supply and fixing in replacement of Fuse grip for voltage stabilizer 4 KVA or 5 KVA capacity of any make and type, complete all as specified and as directed.

Supply and fixing in replacement of Control transformer for voltage stabilizer 4 KVA or 5 KVA capacity of any make and type, complete all as specified and as directed.

Supply and fixing in replacement of Low/High Voltage Cut off Switch, complete all as specified and as directed.

Supply and fixing in replacement of Brass bushes suitable for 3 to 5 KVA voltate stabilizer, complete all as specified and as directed.

Supply and fixing in replacement of Remote suitable for window/split AC of 1.5/2 TR capacity complete all as specified Make LG / Voltas

Supply and fixing in replacement of PCB card suitable to run window AC any capacity and indoor unit of Split AC any type or capacity complete all as specified and and as directed

Supply and installation of Voltage stablizer 4KVA Capacity, range 170V to 270 Volts, 50 HZ, including depositng the old u/s stabliser to MES store yard complete all as specified and as directed.Make Bluebird/ V guard / Volini (Note: Old U/S BER voltage stabliser shall be deposited to MES store yard)

Supply and fixing in replacement of pvc sheathed cable three core copper conductor 2.5 Sqmm complete all as specified and as directed