Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | H3₹1.0 LAccepted-AOC | ₹1.0 L | H3 | Accepted-AOC AOC |
| 2 | H1₹1.4 LRejected-Finance | ₹1.4 L | H1 | Rejected-Finance Highest |
| 3 | H2₹1.1 LRejected-Finance | ₹1.1 L | H2 | Rejected-Finance Highest |
| Sl No | Description | Qty | Unit | Vidya Sagar Verma H2 | MAHESH SHARMA H1 | BESAR DASS H3 |
|---|---|---|---|---|---|---|
| 2.00Description | ||||||
| 3.00 | Excavation in foundations, trenches etc. in earth work, lift up to 1.50 mtrs. stacking the excavated soil not more than 3 mtrs. clear from the as of excavation and then returning the excavated soil in 15 cm. layers when required into plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 20 mtrs.- P-J Work. | 50.63 | Cum | 400 ₹20,252 | 300 ₹15,189 Lowest | 300 ₹15,189 Lowest |
| 4.00Electric welding with superior quality rod rising main of varioud dia to stop the leakage including cutting of pipe if required alignment as per site with the help for generator set at site of work | ||||||
| 5.00 | 32 mm dia. | 30 | Joint | 1,000 ₹30,000 | 1,300 ₹39,000 | 700 ₹21,000 Lowest |
| 6.00Providing and laying cement concrete 1:2:4 work (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:- | ||||||
| 7.00 | Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilever up to floor two levels. | 0.71 | Cum | 11,000 ₹7,810 | 6,500 ₹4,615 Lowest | 7,000 ₹4,970 |
| 8.00 | In Plinth and Foundation | 0.54 | Cum | 12,000 ₹6,480 | 6,500 ₹3,510 Lowest | 6,500 ₹3,510 Lowest |
| 9.00Providing form work with steel plates 3.15 mm thick welded with angle iron in frames 30x30x5 mm so as to give a fair finish i/c centring ,shuttering, strutting and propping etc. with wooden battens & ballies, ht. of propping & centring below supporting floor to ceiling not exceeding 4 mtrs. & removal of the same for insitu-reinforced concrete work in : | ||||||
| 10.00 | Flat surfaces such as soffits and suspended floors, roofs , landing and the like:- | 7.07 | Sqm | 200 ₹1,414 Lowest | 350 ₹2,474.5 | 400 ₹2,828 |
| 11.00 | Providing mild steel/tor Steel reinforcement for R.C.C work including bending , binding and placing in position complete up to floor two level. | 112.19 | Kg | 85 ₹9,536.15 | 80 ₹8,975.2 Lowest | 90 ₹10,097.1 |
Tender Value
₹2.1 L
EMD Value
₹4,200
Closing Date
10 Feb 2026, 11:00 amClosed
EE JAl Shakti Shimla Rural Division at Sunni
EE JAl Shakti Shimla Rural Division at Sunni
Repair of Rising main
2026_HPIPH_126894_1
SNN-SML-003-740-Tdr-25-9418-24 dt.27.01.2026
Open Tender
Civil Works - Water Works
Item Rate
90 days
EE Sunni
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
EE Suni
₹4,200
10 Jun 2026
28 Jan 2026
10 Feb 2026
28 Jan 2026
10 Feb 2026
28 Jan 2026
28 Jan 2026 - 10 Feb 2026
Description
Excavation in foundations, trenches etc. in earth work, lift up to 1.50 mtrs. stacking the excavated soil not more than 3 mtrs. clear from the as of excavation and then returning the excavated soil in 15 cm. layers when required into plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 20 mtrs.- P-J Work.
Electric welding with superior quality rod rising main of varioud dia to stop the leakage including cutting of pipe if required alignment as per site with the help for generator set at site of work
32 mm dia.
Providing and laying cement concrete 1:2:4 work (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-
Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilever up to floor two levels.
In Plinth and Foundation
Providing form work with steel plates 3.15 mm thick welded with angle iron in frames 30x30x5 mm so as to give a fair finish i/c centring ,shuttering, strutting and propping etc. with wooden battens & ballies, ht. of propping & centring below supporting floor to ceiling not exceeding 4 mtrs. & removal of the same for insitu-reinforced concrete work in :
Flat surfaces such as soffits and suspended floors, roofs , landing and the like:-
Providing mild steel/tor Steel reinforcement for R.C.C work including bending , binding and placing in position complete up to floor two level.
Providing, and fixing GI union as per ISI specification no.1879-1987 (with latest ammendents) of various dia complete within all leads and lifts as per direcction to the entire satisfaction of Engineer-in-charge.
15 mm dia nominal size
20 mm dia nominal size
25 mm dia nominal size
32 mm dia nominal size
40 mm dia nominal size
Providing, and fixing full way wheel valve/GM Gate valve (with hand wheel) as per IS :780 class upto 300 mm (including brass spindle and as per IS:2906 class II for diameter more than 300 mm complete with bolts,nuts,rubber insertation etc.(The tail pieces if required shall be measured and paid for seperately).
15 mm dia nominal size
20 mm dia nominal size
25 mm dia nominal size
32 mm dia nominal size
40 mm dia nominal size
Providing, and fixing GI Nipple of different dia diameter duly ISI marked comnplete within all leads and lifts as per the direction of Engineer-in-charge.
15 mm dia nominal size
20 mm dia nominal size
25 mm dia nominal size
32 mm dia nominal size
40 mm dia nominal size
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.16 MB
FORM6.pdf
Tender Documents • 0.16 MB
FORM-8.pdf
Tender Documents • 0.67 MB
terms.pdf
Tender Documents • 0.10 MB
BOQ_187259.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].