8398 SPECIAL REPAIRS TO BLDG NO. 9 LAWRENCE ROAD UNDER GE (SOUTH) PUNE

Amount

Dismantling of single layer Mangalore pattern tiles or similar tiles in roofing etc complete all as specified and directed

Dismantling battens for tiles shingles etc of any size including tiling fillets exc 15 cm spacing etc complete all as specified

Dismantling timber scantling in any position (unframed wok) exc 40sqcm in section complete all as specified and directed.

Dismantling timber scantling unframed in post, rafters, purlins etc under 40 Sqcm in section complete all as specified and as directed.

S&F IInd class hard wood timber clean sawn as in scantling complete all as specified and directed.

M&L for roof tiles, Mangalore pattern Gde 'AA' interlocking at side joints laid dry complete all as specified and directed.

Fixing only for roof tiles Mangalore pattern interlocking at side joints laid dry (except tiles) complete all as specified and directed.

M&L for Ridge or hip tiles to suit Mangalore pattern roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and directed.

M&L for IInd class HW clean sawn battens exceeding 5 and n. exc 15 sqcm in cross section, spaced at 20cm centres complete all as specified and directed.

Material and labour for 2nd class hardwood plain fillets square,rectangular in section exceeding 13 sqcm but not exceeding 25 sqcm clean sawn fixed with nails

Filleting in any position and to any shape in cement mortar 1:3 including all mitres/stops, etc sectional area 25 to 50 Sqcm complete all as specified and directed

M&L for Weather boarding, 2 nd class HW clean sawn, 20 to 25mm thick and rebated on thick edge to give 20mm laps and fixed to wooden/steel member including two coats of synthetic enamel paint over a coat of primer complete all as specified and directed

M&L for preparing new surfaces of wood and wood based materials of any description and girth not other wise described and treating with two coats of creosote oil complete all as specified & directed.

Dismantling wall and ceiling boards, any thickness, including cover fillets complete all as specified and directed.

S&F for Gypsum ceiling board for ceiling of approved pattern finish 595x595x9 to 9.5mm thick in size of approved brand/make, laid over and including grid work of size 600x600mm, made out of 0.5mm thick GI tee 32x24mm for main, 25x24mm for cross tee and 20x20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle, hung from ceiling using 2mm dia GI suspension wires spaced at 1200mm on main runners including making niches for fans/light complete all as specified and as directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick, 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for rolled mild steel conforming to grade E-250 (Fe-410W, quality A) as in main and cross beams, hip and jack rafters, purlins, where connected to common rafters and running rails and guides for sliding doors, fixed with angle clips or other connecting plates.

M&L Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.

S&F of rotational moulded polythene water storage tank (1000 litres capacity) of tripple layers (cylindrical vertical with closed top) hoisted and fixed in position including locking arrangement device, PTMT tank nipple of suitable size & fittings fixtures etc including disconnecting and taking down of existing tank complete all as specified and directed

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) including demolition of brick/PCC block/stone masonry work complete all as specified & directed.

M&L for PCC (1:2:4) type B-1 using 20mm graded stone agg as in coping on top of wall, bed blocks and the like inculding weathering , slightly rounded or chamfered angles and throating as directed by Engr-in-Charge including use of necessary form work complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:4) on brick / concrete surfaces using water proofing compound as per manufacturers instruction finished with sponge finish complete all as specified and directed (NOTE : WPC shall be measured and paid seperately)

Supply only integral water proofing compound complete all as specified and directed.

M&L for Flush pointing to squared rubble masonry, coursed or uncoursed with CM 1:4 complete all as specified and directed

M&L for rendering 15mm thick in CM (1:6) on stone masonry/brick/concrete surfaces finished even & smooth including dubbing out cement plaster of 20mm average thickness on stone masonry/brick/ block walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. (Note : Necessary Precaution should be maintain to dubbing out plaster from stone wall.)

M&L for Preparation of new plastered & flush pointed surfaces and applying two coats of exterior emulsion paint over a coat of primer paint complete all as specified and as directed.

M&L for Preparation of old plastered surfaces and applying two coats of weather coat exterior emulsion paint over a coat of primer paint complete all as specified and as directed.

M&L for Preparation of old /new mangalore pattern tiles surfaces and applying two coats of exterior emulsion paint over a coat of primer paint complete all as specified and as directed.

M&L for Preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over & including applying of 2mm thick wall care putty complete all as specified and directed.

M&L for Preparation of old painted surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over & including applying 2mm thick wall care putty complete all as specified and directed.

Taking down chowkats or frames of wooden or steel or aluminum not exc 1.5 sqm (without taking off shutters from frames) complete all as specified and directed.

Taking down chowkats or frames of wooden or steel or aluminum exc 1.5 sqm and not exc 4 sqm (without taking off shutters from frames) complete all as specified and directed.

S&F three track sliding window with two or more shutter with 4mm thick tinted glass one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S & F ventilators/louvers using 4mm thick x 10cm wide froasted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed :- (a) SP : 20048 (b) Glazing clips : 19352

Resecuring, easing & adjusting without taking down shutter of any description exc. 1sqm and not exc. 2sqm each including fixing of necessary iron mongry / fittings complete all as specified and directed. (Note :- One set of window of single/double/tripple leaf or one door shutter of sinlge/double leaf shall be measured as one job)

S&F aluminium powder coated fancy type curtain rod 20mm bore medium grade complete all as specified and directed.

S & F aluminium powder coated brackets suitable for 25mm bore curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed.

S & F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions complete all as specified and as directed.

S&F butt hinges 100mm size stainless steel medium weight complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed.

S&F aluminium handles, anodised, cast type, of size 150mm complete all as specified and directed.

S&F sheet glass ordinary quality 5mm thick and glazing with oil putty or wooden beads in square n exc 0.50 sqm in each pane complete all as specified and directed.

M&L for 18/19 mm thick perlaminated particle board, exterior graded, prelaminated both side with decorative choice lamination fixed with screws to wooden frame in repair including locking arrangements complete all as specified and directed.

S&F continuous (Piano) hinges mild steel bright finished or electro galvanised width of flap 30mm complete all as specified and directed.

S&F 100mm dia cupboard handles fixed with nuts screws and washer of brass polished complete all as specified and directed.

S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10cm and not exc 20cm girth complete all as specified and as directed.

Taking up or down carefully steel tubing and connections including cleaning for refixing complete all as specified and directed of following sizes :-

15mm bore

20mm bore

S&F GI tubing tubes "medium grade" galvanized with all fittings and fixtures complete fixed to walls and ceiling or laid in floors etc complete all as specified and directed of the following sizes :-

15mm bore

20mm bore

S&F in repairs Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified & directed of following bore of pipe :-

20mm bore

25 mm bore

S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified & directed with 25mm bore

Dismantling of drain pipes AC/CI/PVC pipes of various dia jointed in CM or adhesive 75 to 110mm dia complete all as specified and as directed.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall/ceiling or laid in trenches of size 110mm dia incl all necessary fittings complete all as specified and as directed.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall/ceiling or laid in trenches of size 75mm dia incl all necessary fittings complete all as specified and as directed.

S&F in repairs Counter top basin of Size 610x415x160mm complete all as specified & directed. (Make : Jaquar Product code DRS-WHT-37601 or equivalent model in CERA / Parryware as approved by GE)

S&F Bottle trap (with internal Partition) 32mm size with 250mm & 190mm Long wall connection pipes and wall flange complete all as specified & directed. (Make : Jaquar Product code ALM-WHM-769L250x190 or equivalent model in CERA / Parryware as approved by GE)

S&F Basin Mixer for hot and cold water without popup waste with 450mm long Braided Hoses complete all as specified and directed. (Make : Jaquar Product code ARI-CHR-39001B or equivalent model in CERA / Parryware as approved by GE. )

S & F in repairs, vitreous china wash down water closet pan "Pedestal" coloured including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinge devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc complete all as specified and direcrted.

Cutting holes in brick walls built in cement mortar for bolts, joist, pipes, air flues, ventilators and cast iron boxes superficial area exc 150 sqcm but n exc 400 sqcm and making good in CM (1:3) or PCC (1:2:4) type B-1 as required.

S&F Wall mixer 3-in-1 including telephone shower for 15mm bore of pipe conforming to CAT No CON-CHR-281KN of "Jaquar" or Equivalent make of CERA / Parryware

S&F in repairs CP brass Bib taps 15mm bore fancy type conforming to CAT No ARI-CHR-39037 of "Jaquar" or Equivalent make of CERA / Parryware

S&F in repairs CP towel rail 20mm dia and 600mm long including brackets conforming to CAT No ACN-CHR-1111N of "Jaquar" or Equivalent make of CERA / Parryware

S&F CP toilet paper holder confirming to CAT No ACN-CHR-1151N of "Jaquar" or Equivalent make of CERA / Parryware

S&F CP Soap dish confirming to CAT No ACN-CHR-1131N of "Jaquar" or Equivalent make of CERA / Parryware

S&F Corner glass shelves with brackets CAT No ACN-CHR-1173 of "Jaquar" or Equivalent make of CERA / Parryware

S&F in repairs CP shower rose 125mm dia with arms for 15mm bore of pipe conforming to CAT No OHS-489 of "Jaquar" or Equivalent make of CERA / Parryware

S&F in repairs Two way Bib taps CP 15mm borefancy type conforming to CAT No. ARI-CHR-39041 of "Jaquar" or Equivalent make of CERA / Parryware

S&F in repairs CP towel ring square conforming to CAT No. ARI-CHR-1121 N of "Jaquar" or of or Equivalent make of CERA / Parryware

S&F in repairs CP 15mm bore concealed stop cock with long neck conforming to CAT No. ARI-CHR-39089 of "Jaquar" or of or Equivalent make of CERA / Parryware

S&F in repairs Hand Shower( Health faucet) with 8mm dia, 1.2mtr flexible tube and wall hook with N.R.V. (back flow prevented) complete all as specified & directed. Make Jaquar Product code ALD-CHR-577or equivalent model in CERA as approved by GE.

Dismantling stone slabs/tiles of any description or thickness laid bedded & pointed in cement mortar in floors, hard standing, Apron etc complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate, 25mm average thickness levelling course as in padding concrete complete all as specified and directed.

M & L for matt finish coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 20mm thick screed bed in CM (1:4) etc complete all as specified and directed.

M&L for coloured vitrified tiles (GVT), matt finished of size 1200 x 600 x 8 to 10mm thick as in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 20mm thick screed bed in CM (1:4) complete all as specified and directed.

M & L for 300x600mmx5.5 to 6mm thick coloured glazed ceramic tiles in dado/skirting , laid and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 10 mm thick CM (1:3) backing coat including triangular filleting on top in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

S & F for Granite 18 to 20mm thick, machine cut (of any type) work (table rubbed and polished) in steps, kambs, pillars, window cills, cooking platforms and like in 10mm thick screed bed cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding edges of granite stone slab one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed.

M & L for Machine cut cuddapa stone slabs one side polished 20 to 25mm thick set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 20mm screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base/ flooring complete all as specified and as directed.

M&L for precast inerlocking paver blocks glossy finish with any shape and size conforming to 15658-2006, 60mm thick M-35 grade with grey cement and pigment laid over & including 50mm thick stone dust/grit complete all as specified and as directed

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) 75mm thick laid in alternate bays including finishing the surfaces even and sooth using extra cement as in plinth protection, PCC path complete all as specified and directed.

S&F in repairs cast iron floor/Nahani trap with grating 100mm dia including jointing to waste pipe fixed in cement concrete type (1:2:4) type B-1 including removing old traps complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundations, and getting out in in hard/dense soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soil complete all as specified and as directed

Removing the excavated materials exceeding 50mtr but not exc 250 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed.

Demolition and breaking up RCC, SWG, CPVC drain pipes set in cement mortar for 150 mm bore size and removing debris from the site complete all as directed by Engr-in-Charge

M&L for PCC 1:4:8 type D2 using 40mm graded agg as in bed to drain pipes including forming cradles for 150mm bore RCC hume pipe complete all as specified and as directed.

M&L for RCC pipes class NP-2 with socketed ends laid and jointed complete 150mm bore pipe complete all as specified and as directed. (Note :- Laying of sewage line in running sewage water & temporary diversion /plugged of existing sewage line & bailing of sewage water is the responsibility of contractor and the rate for the same is seems to be included in the contract)

S&F in repairs PVC gully traps, square 125/110mm size with grating including jointing to waste pipe in cement joint, dia of outlet 100mm complete all as specified and directed.

M&L for precast factory made manhole cover with frame of medium duty, of size Square / rectangular / circular area of each cover exc. 0.35 Sqm and not exc. 0.75 Sqm, 75mm thick with SFRC concreting including groove and hook arrangement for lifting and placing in position and sides covered by MS sheet with necessary collars complete all as specified and directed.

Grubbing up tree trunk of girth exc 30cm and not exc 100cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance not exc. 50 m and clearing site complete all as specified and directed.

Felling of tree of girth exc 30cm and not exc 100cm including cutting of trunk, and branches and stacking of serviceable material and disposal of unserviceable material to a distance not exc. 50 m and clearing site complete all as specified and directed.

Taking down carefully exising unserviceable aluminium point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor etc. complete all as specified and as directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes all as specified.

Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.

M & L for point wiring with colour coding as per IS with multi-stranded copper conductor 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS cable conforming to IS: 694-1990 PVC insulated, unsheathed copper conductor cable drawn through in and including heavy duty PVC concealed conduit of white/ ivory colour including all accessories after cutting chasing in wall of any type /ceiling etc, including GI sunken boxes with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches including PVC insulated multi-stranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :-

One light point controlled by one way switch 5 Amp

One fan point / exhaust fan point controlled by one way switch 5 Amp and regulator

One 3 pin 5 Amps Socket outlet point controlled by one switch on independent board.

One 3 pin 5 amps socket outlet point controlled by one switch on same board with other switches

One bell/buzer point controlled by one switch 5 Amp

All as per Ser. Item No. 98.00 above but with stranded copper 2.5 Sqmm (Nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin 15Amp socket outlet on independent board including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal aera) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed.

S & F for modular Bell push modular 6 Amps single module complete all as specified and as directed.

Supply and fix Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply including removal of old unserviceable one complete all as specified and as directed

S & F for Modular switch one way 6 Amps, 1 module complete all as specified and as directed.

S & F for Modular switch one way 16 Amps, 1 module, with neon indicator complete all as specified and as directed.

S&F ceiling rose PVC / polycarbonate isolated body 3 ways terminals, ISI marked complete all as specified and as directed.

S & F modular step type fan regulator 120 watt single module suitable for operation on 230 volt 50 HZ AC supply complete all as specified and as directed

S & F Modular socket, 6 Amps, 2/3 pin combination 2 module complete all as specified and as directed.

S & F Modular socket, 6/16Amps, 2/3 pin combination 2 module complete all as specified and as directed.

Supply and fix lamp holder, PVC/Polycarbonate type with back plate suitable for batten / slanting fittings complete all as specified and as directed.

S&F vertical 8 way TPN double door recess mounted/wall mounted MCCB's as incommer is 3 pole V- Tec of 100 amps rating & 16 KA breaking capacity MCCB is pre fitted at factory & including price of MCCB all as directed and spd by engr in charge Cat Part No DBVTH004SD L&T equivalant to Havells/Legrand all as specified and as directed.

Supply and fix MCB DB of sheet metal enclosure double door SPN 8 way with 200 Amps rated bus bar 230 volt and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and as directed.

S&F MCB SP 6-32 Amps,10KA,'C' series, complete all as specified and directed.

S&F MCBs, SPN 40-63 Amps, 10 KA , IS/IEC 60898-12002 marked fixing in DBs complete all as specified and as directed. (Note : DBs shall be measured and paid seperately)

S&F MCB SPN 32 Amps,10KA,'C' series, complete all as specified and directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 4.0 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size concealed in wall etc including one run of PVC insulated 4.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. (Note:- Three runs of 4.0 sqmm cable cable and one run of PVC conduit will be measured as one unit all as specified and as directed.)

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sqmm nominal area and drawing into PVC non metallic rigid PVC casing caping including one run of PVC insulated 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. (Note :- Three runs of 6.0 sqmm cable and one run of non metallic rigid PVC casing caping will be measured as one unit)

S&F LED light fitting, 1X20 Watt surface mounted LED high efficiency LED luminare smart bright ingress protection : IP66 with acrylic cover comprises pre-wired with high efficiency electronic driver,high translucent frosted diffuser gets glare free, smooth light distribution complete all as specified and as directed. (Make : Philips Cat No - BN021C LED20S PSU NW GR or equivalent in Wipro/Bajaj)

Supply and fix in repairs LED mirror light fittings wall mounted type suitable for 1x10 watt with high output diffuser and all fixing arangements conforming to Cat Part No BCLSB 10 WH of Bajaj or equivalant to Wipro / Havells complete all as specified and directed.

S&F for Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP-66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with prewired and necessary mounting arrangement and provision 2.5 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including suitable dia GI pipe medium grade bracket 1.5 mtr long bent to required shape and including taking down old unserviceable existing light fittings of any description complete all as specified and as directed. (Make : Bajaj Cat Part No. BCLST 25Watt LED / Philips Cat Part No. BRP042 or of equivalent in Wipro)

S&F decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and including provision of LED bulb 10/11 Watts complete all as specified and as directed. (Make : Havells Cat Part No. LHGLO 6160099 or of equivalent make in Wipro, Philips, Bajaj)

S&F LED luminaire 600mm x 600mm, 35/36 watt, 220 Volt AC recessed type with high efficiency PMMA diffuser soft glare free light with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

Taking down ceiling fan of any size/sweep after disconnecting the wire from existing ceiling rose including refixing the same after cleaning dust, oiling, greasing, painting with two coats synthetic enamel paints and writing MES No. etc including providing flexible three core wire of size 23/0.0076 from ceiling rose to connector of fan complete all as directed by Engr-in-Charge.

Dismantling and taking down Old unserviceable meter box of any type, size and making good with disturbed surface filling of brick work and cement plaster including two coats of cement based paint and provided new electric meter box suitable for three phase electric meter with MCB TPN 40 Amps made out of 2mm thick CRCA MS sheet with transparent door for meter reading complete all as specified and as directed.

S&F in replacement metal body exhaust fan, AC single phase heavy duty, turbo force 240 Volts of size 200mm sweep with louvers including necessary connection and replacement of flexible copper cable from ceiling rose complete all as specified and as directed. (Make : Bajaj Cat Part No. Maxima DX 8" or of equivalent make in Crompton / Havells)

M & L for earthing complete with galvanized steel earth plate electrode '60cm × 60cm × 6mm thick, buried 'directly in ground (earth pit not less 'than 2.25 metres deep below normal ground 'level) with top edge of the plate not 'less than 1.5 metres below normal ground level', connected to galvanized iron strip 32x6mm by means of bolts, nuts, check 'nuts and washers of galvanized iron or 4mm dia GI steel wire protected by provision of GI 'medium grade' pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B1 (using 20mm graded stone aggregate) with 40mm thick cover in RCC (1:2:4) type B-1 reinforced with XPM (weight not less than 4 kg/sqm) and frame made out in MS angle iron of size 25x25x3mm with lugs 02 Nos and with MS handle made in 6mm dia round bar made to shape, including GI 'medium grade' 20mm bore pipe for watering, perforated at bottom 1.75m long placed on top edge of earth plate including provision of mixture of charcoal dust & common salt packed upto minimum 150 mm all around the earth plate, test point made out of phosphorus bronze with fixing

Sr. Item No. 124.00 Contd... arrangement, funnel, wire mesh and earth work in hard/dense soil returning filling in and removal of surplus soil to a distance not exceeding 50mtr all as shown in electrical plate No. 3 of SSR Part I 2009 connected to earthing test point all as specified or indicated 'including testing on completion. (NOTE:- GI wire and GI pipe 15mm bore medium grade for encasing GI wire upto 7.50m length per earthing shall be deemed to be included in the unit rate.)

M&L for cutting and making hole into or through cement concrete or stone masonry wall of thickness upto 45cm and girth not exc. 45cm for fixing exhaust fan of size 300mm sweep with louvers and providing fasteners grouted in wall four Nos. inside for fixing of exhaust fan and four Nos. outside for louvers and redressing surface and making good with in CM 1:4 to match with existing surface including lime white wash complete all as specified and as directed

S&F industrial metal clad socket 2P+1N complete with metal clad 3 pin top and MCB SP 32A in sheet metal enclosure complete all as specified and directed.

M & L for wiring in PVC casing caping complete with 1.5 sqmm single core FRLS grade PVC insulated unsheathed,1100V grade copper multistranded existing PVC insulated FRLS grade copper earth continuity conductor cable 1.5sqmm connected to common earth dolly including steel terminal boxes made out of 1.2 mm thick MS sheet, concealed in walls for housing the switches ,socket outlets ,fan regulators One light/one fan point controlled by one switch complete all as specified and as directed.

All as per item No. 127.00 here in before but for One 5A 3 pin switch socket outlet on same board complete all as specified and as directed.

All as per Ser. item No. 127.00 above but for One 5A 3 pin switch socket outlet mutipurpose on independent board complete all as specified and as directed.

Supply and fix switch piano flush button type 5 amps SP one way complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 Pin 5 Amp flush type 240 volts complete all as specified and as directed.

Raj Construction Company

M/s.BAJRANG CONSTRUCTION

shiva traders

ANIL CONSTRUCTION CO.

Agarwal Agencies