Establishing 2x20MVA,110/11kV substation at K.Basavanahalli along with Construction of 110kV LILO line using Lynx Conductor for a distance of 11.958 kms from existing 110kV Yagati-Singatagere SC line to the proposed 110kV sub-station at K.Basavanahalli in Kadur Taluk,Chikkamagaluru District

Power Transformer:

20 MVA, 110/33-11kV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, first...

Supply, Erection & Commissioning of Nitrogen

Injection Fire Extinguishing System for Power

Transformer below 100 MVA as per technical specifications

Circuit Breaker :

SF6 Gas circuit breaker with Semi-Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting Structures arrangements with rigid, bi-metallic terminal conn...

Isolators : Double break manually operated isloators with solid core insulator, terminal connector suitable for Al. tube /conductor (Moose ACSR/75mm/63mm), marshalling box etc., complete as per techn...

ii.Upright mounting type without Earth switch(Live point height 4600mm)

iii.Upright mounting type without earth switch(Live point height 6350mm)

Note:Terminal connectors for Isolators shall be as follows:

Rigid type suitable for Moose ACSR- 30 Nos

Flexible type suitable f...

B. 11 kV Isolators:

11KV isolators, Double Break 400A, 25KA capacity with rigid bi-metallic terminal connectors suitable for Coyote ACSR for Capacitor Bank

11 kV isolator, single break 400 A, 25 KA capacity with Roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR.

CURRENT TRANSFORMER : Current transformers including marshalling boxes, Single phase,oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR conductor as per technica...

110KV Class, 40KA, CT of ratio 400-200/1-1-1A for Tr. Lines.

Core - 1 : Vk-800 V at 400A, Rct 4 ohm at 400/1A, Accuracy class PS-Dist/Dif

Core- 2 : 10 VA, Accuracy class 0.2s- Metering

11kV Class, 25kA, NCT of ratio 1200-800/1-1-1A for REFR Protection (of similar rating and ratio as that of Incomer of 11kV Switchgear) with terminal connector suitable for 2 Nos. of 75mmx6mm Copper fl...

VOLTAGE TRANSFORMER : Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR with marshalling box KIOSK as per technical specifications

110 kV class 1...

SURGE ARRESTOR : (Porcelain housing) metal oxide, Gapless type with rigid bimetallic connectors suitable for Moose ACSR as per technical specifications

96 kV, 10 KA, SM type -For overhead Lines

96 kV, 10 KA, SM type-For Transformers

9 kV, 10 KA with connector and clamp

Capacitor Bank: Design, Engineering, supply, erection, testing & commissioning of 2.9 MVAR, 12.1 kV Capacitor Bank, star connected, Double Bank with internal fuses, terminal connectors with suitable n...

Control and Relay Panel complete as per specifications:

Simplex type control and relay panels complete as per specifications.

a.For Power Transformer 110/11 kV

b.For 110 kV Transmission line

1) All the C&R panels and associated panels shall be of one and same make for uniformity and interchangeability of components.

2) The accuracy class of metering ...

Total Weight of Station structures & Mounting Structures (excluding Bolts & nuts) for splitup refer technocommercial sheet

Total Weight of Bolts & nuts of Station structures & Mounting Structures

11 kV ODS and take off structure:

Supplying of Double pole structure with 9.5 Mts. RCC poles WL 300 Kgs for mounting 11 kV 400 A Roaster Isolators and 9 kV, 10 KA surge arrestor (3 No.) complete set...

BUS BAR FORMATION :

Rigid bus with taps & clamps:

i) Aluminium pipe conforming to 6340WP of IS - 5082 / 1969 (BS I600-Sch. 40) of following nominal diameter a) 75mm.

b) 63mm size connecting isolator to vertical tap

ii) Straight taps suitable for 63mm Aluminium tube (BS-1600) of 1750mm vertical height for vertical portion & cross bus on 110KV side with rounded off end.

iii) A) Post insulator clamps suitable for 75 mm Aluminium pipe & Post insulator solid core type - 110kV side

c) Corona Bell Suitable for Aluminium Pipe of size 75mm on 110 kV

vi) End cap suitable for AL tube of size 63 mm on 110KV

vii) Flexible Type Terminal Connector suitable for 63mm Alpipe to connect Isolators and Bus PT

(i) Solid core Bus Post insulator Insulator 110kV,

(i)C Type wedge connector suitable for Moose - Lynx

ii)Post insulator clamp suitable for Moose ACSR and 110kV Solid core insulator

Auxiliary Transformer :

(i)Supply of Auxiliary Transformer with copper windings and oil, cable termination type on both HT & LT outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn 11 off loa...

ii)Supplying of DP structure with 9.5 mtr RCC poles, 11 kV 400 A double break isolators, 9 kV, 10 KA surge arrestor (3 No.), H-Frame along with DOLO/HG fuse unit, LTprotection kit/LTD box, LT Trivect...

LTAC Distribution panel (Indoor),415V as per technical specification comprising of Voltmeter, Ammeter,1 I/C MCCB 200A + 2 nos. 3 Phase 63A O/G SFU +2 nos. 3 Phase 32A O/G SFU 100A + 14 O/G SFU, 6 nos....

AC Distribution box (outdoor) Single front type with 6 terminals 1200 x 1350 x 300 mm one I/C of 100 A MCCB 20 KA+ 6 O/G 16 A MCB +1 O/G of 100 A HRC Fuse panel 415 V outdoor type complete as

LT Power armoured UG cable as per specification:

a) 1.1 kV class 4 X 95 Sq mm L T Aluminium Cable with glands/lugs/ferrules.

b) 1.1 kV class 4 X 25 Sq mm Copper Cable with glands/lugs/ferrules.

c) 1.1 kV class 4 X 10 Sq mm Copper Cable with glands/lugs/ferrules.

STATION BATTERY & BATTERY CHARGER :

110V, 200AH Battery set (Plante/Grid/Nickel Cadmium Type) with accessories as per specification

Battery charger- suitable for '1 X 110 V, 200 AH, Battery set (Plante/Grid/Nickel Cadmium Type)15 A float and 30 A boost (with float and boost battery charger as per technical specification)

LT DC Distribution panel ( Indoor) as per Technical specification comprising of Earth fault indicator, Indication circuit for AC main failure, 1 No 100A SFU for IC + 12 nos., 32A SFU for OG etc, compl...

1.1 kV Grade PVC Insulated armoured copper control cables of sizes,with Lugs/Ferrules/Gland as per technical specifications.

19C x 2.5 Sq.mm

10C x 2.5 Sq.mm

(For station Yard Lighting -1000Mtrs)

11KV U.G. Cable with the required cable terminations at both ends as per specifications.

(i)One run of 11kV, XLPE 95 sq.mm Al., 3 core cable - (to be run for Auxiliary Transformers from 11KV switch...

ii)11KV XLPE cable, 1000Sq. mm. Aluminium cable from 110/11KV transformers to 11KV Switchgear

iii)11KV XLPE cable, 240Sq. mm. Aluminium cable 3 Core to be run from 11KV Switchgear to 11kV take off DP Structure

iv)Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable ( Indoor type )

v)Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable (Out door type)

vi)Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable ( Indoor type )

vii)Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable (Out door type)

viii)Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable ( Indoor type )

ix)Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable (Out door type)

FIRE FIGHTING EQUIPMENTS WITH NECESSARY MOUNTING STANDS:

Foam type extinguisher (Mechanical) 50 Ltr. capacity

Foam type extinguisher (Mechanical) 9 Ltr. capacity

Water type (gas pressure type) 9 Ltr. capacity

Carbon di-oxide type 4.5 kg Capacity

Sand type G.I Buckets 15 Ltr. Capacity

Steel stands for above to have 4 buckets to each stand.

Maintenance Tools and Plant:

Portable (mobile) oil pumps (1/2 HP Air pump 500 to 1000 gallons)

Telescopic ladder Aluminium 6 Mtr. Height

Ring spanner set

Tube spanner set

Pipe wrench 24 inch

Pipe wrench 18 inch.

Hydraulic crimping tools up to 1000 Sq.mm

Rubber hand gloves (15 kV tested)

Rechargeable 5W LED hand torch

Insulated cutting plier 12 inch size

Insulated cutting plier 8 inch size

Line live tester AC/DC 500 V

Screw driver 18"

Screw driver 12"

Chain pulley block 5 ton capacity

Hydraulic jack 5T capacity

Pipe derrick suitable for lifting 3 MT and lift of 6 Mtr. Height

Transil oil di-electric break down (with 2.5 mm gap 0-60 kV) Tester.

Insulation megger 2.5 - 5 kV

Insulation megger 500 V

SF-6 gas leak Detector

Multimeter electromechanical

Multimeter Electronic

DC Voltmeter range -5V to + 5V

Hydrometer syring suitable for vent holes

Specific gravity correction chart

Thermometer with wall mounting holder

Protective goggle

Acid resisting jars (4 pint capacity)

Rubber shoes knee height

Grounding sticks extendable upto 18 ft

Wall mounting type holder for hydrometer

MISCELLANOUS ITEMS

Rubber mats 1000 mm x 1000 mm x 10 mm size

Shock treatment charts, hard board, liminated with coloured pictures & literature both in Kannada & English.

Water filter / Water purifier : Wall mounting type (Aqua-guard type).

Sub-station name board duly painted.

Fixograph of size 1.5m x 2.5m with English / Kannada alphabets.

Brass cupboard locks 6 Levers (best make of approved quality) 75mm size

Danger board(prohibited) with support structure including fixing in front of the gate

Equipment name plates and earthing name plates including fixing at outdoor yard

Furniture for Control Room Staff and maintenance staff

i.Steel Almirahs 6 1/2 feet

ii.Steel Almirahs 6 1/2 feet with glass panel doors

iii.Officers tables

iv.Steel Slotted angle rack (big Size)

v.Steel Slotted angle rack (small Size)

vi.Steel dustbins

vii.Executive revolving chairs

viii.‘S’ Type Arm Chairs

ix.Steel folding Chairs

Equipments for establishing SCADA Communication :

Note:1.Satellite Communication required will be arranged by SLDC

i.Remote Terminal Unit (RTU) 64 (I/O) Port

ii.Data Concentrator Unit (DCU)

iii.2 kVA online UPS (230 V AC 1 phase 50 Hz) with Battery set confirming to KPTCL specification

i.Current Cables-Copper Core with c/s 4.0 sq.mm Multistrand 4 Core

ii.Voltage Cables-Copper Core with c/s 2.5 sq.mm Multistrand 4 Core

iii.Signal Cables-armoured Copper Core with c/s 0.5 sq.mm Multi strand 10 Core

iv.Control Cables- Copper Core with c/s 1.5 sq.mm Multi strand 10 Core

v.Supply Cables-Copper Core with c/s 4.0 sq.mm Multi strand 3 Core for AC input to UPS & UPS to RTU, conforming to KPTCL specifications.

vi.Supply Cables-Copper Core with c/s 32.0 sq.mm Multi strand for Battery conforming to KPTCL specifications.

STATION & YARD LIGHTING (OUTDOOR) (To be designed, assessed & quoted by the bidder):

Supply and installation/ Fixing/ Provision of Outdoortype Thermoplastic Modular Panel enclosure with transpare...

Supply & Fixing of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection mou...

Station Erection

Power Transformer:

20 MVA, 110/33-11kV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, first...

Circuit Breaker :

SF6 Gas circuit breaker with Semi-Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting Structures arrangements with rigid, bi-metallic terminal conn...

Isolators : Double break manually operated isloators with solid core insulator, terminal connector suitable for Al. tube /conductor (Moose ACSR/75mm/63mm), marshalling box etc., complete as per techn...

B) 11 kV Isolators

11KV isolators, Double Break 400A, 25KA capacity with rigid bi-metallic terminal connectors suitable for coyote ACSR for Capacitor Bank

11 kV isolator, single break 400 A, 25 KA cap...

CURRENT TRANSFORMER : Current transformers including marshalling boxes, Single phase,oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR conductor as per technica...

11kV Class, 25kA, NCT of ratio 1200-800/1-1-1A for REFR Protection (of similar rating and ratio as that of Incomer of 11kV Switchgear) with terminal connector suitable for 2 Nos. of 75mmx6mm Copper fl...

VOLTAGE TRANSFORMER : Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Moose ACSR with marshalling box KIOSK as per technical specifications

110 kV class 1...

SURGE ARRESTOR : (Porcelain housing) metal oxide, Gapless type with rigid bimetallic connectors suitable for Moose ACSR as per technical specifications

i.96 kV, 10 KA, SM type -For overhead Lines

9 kV, 10 KA with connector and clamp

Control and Relay Panel complete as per specifications:

Simplex type control and relay panels complete as per specifications.

a.For Power Transformer 110/11 kV

b.For 110 kV Transmission line

Total Weight of Station structures & Mounting Structures including Bolts & nuts (for splitup refer technocommercial sheet)

11 kV ODS and take off structure:

Erection of Double pole structure with 9.5 Mts. RCC poles WL 300 Kgs for mounting 11 kV 400 A Roaster Isolators and 9 kV, 10 KA surge arrestor (3 No.) complete set ...

BUS BAR FORMATION :

Note: The scope also includes installing insulator strings complete with necessary Hardwares and stringing of the conductor / Earth wire etc as per specifications.

Formation of ...

Rigid bus with taps & clamps:

i) Aluminium pipe conforming to 6340WP of IS - 5082 / 1969 (BS I600-Sch. 40) of following nominal diameter a) 75mm.

b) 63mm size connecting isolator to vertical tap

Post insulator Solid core Insulator 110 kV, 1 Unit/stack

Auxiliary Transformer

Erection of Station Auxiliary Transformer-copper winding with oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn 11 off load tap changer(5 taps) with step volta...

Erection of DP structure with 9.5 mtr RCC poles, 11 kV 400 A double break isolators, 9 kV, 10 KA surge arrestor (3 No.), H-Frame along with DOLO/HG fuse unit, LTprotection kit/LTD box, LT Trivector me...

LTAC Distribution panel (Indoor),415V as per technical specification comprising of Voltmeter, Ammeter,1 I/C MCCB 200A + 2 nos. 3 Phase 63A O/G SFU +2 nos. 3 Phase 32A O/G SFU 100A + 14 O/G SFU, 6 nos....

AC Distribution box (outdoor) Single front type with 6 terminals 1200 x 1350 x 300 mm one I/C of 100 A MCCB 20 KA+ 6 O/G 16 A MCB +1 O/G of 100 A HRC Fuse panel 415 V outdoor type complete as per ...

LT Power armoured UG cable as per specification

i.1.1 kV class 4 X 95 Sq mm L T Aluminium Cable with glands/lugs/ferrules

ii.1.1 kV class 4 X 25 Sq mm Copper Cable with glands/lugs/ferrules

STATION BATTERY & BATTERY CHARGER :

110V, 200AH Battery set (Plante/Grid/Nickel Cadmium Type) consists of 55 Nos. of cells with accessories as per specification

Battery charger- suitable for '1 X 110 V, 200 AH, Battery set consisting of 55 No. cells- 15 A float and 30 A boost (with float and boost battery charger as per technical specification).

LT DC Distribution panel ( Indoor) as per Technical specification comprising of Earth fault indicator, Indication circuit for AC main failure, 1 No 100A SFU for IC + 12 nos., 32A SFU for OG etc,. comp...

1.1 kV Grade PVC Insulated armoured copper control cables of sizes,with Lugs/Ferrules/Gland as per technical specifications

i.19C x 2.5 Sq.mm

ii.10C x 2.5 Sq.mm

iii.4C x 6 Sq.mm

iv.4C x 2.5 Sq.mm

11kV Switchgear

A) 11kV, 25kA, Metal Clad VCB Switchgear (1600A for Incomer and 1250A for feeders), outdoor type, each comprising of 2IC+12F+1BC+4CB+1AP (Remote Announciation cum Control panel) with ...

11KV U.G. Cable with the required cable terminations at both ends.

i.One run of 11kV, XLPE 95 sq.mm Al., 3 core cable - (to be run for Auxiliary Transformers from 11KV switch Gear to Auxiliary Tran...

Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable ( Indoor type & outdoor )

Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable ( Indoor type & outdoor )

Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable ( Indoor ty...

Equipments for establishing SCADA Communication :

Remote Terminal Unit (RTU)

Data Concentrator Unit (DCU)

2 kVA online UPS (230 V AC 1 phase 50 Hz) with Battery set

Integration of RTU, DCU and UPS with field equipments

Control Cables - Laying

i.Current Cables-Copper Core with c/s 4.0 sq.mm Multistrand 4 Core

ii.Voltage Cables-Copper Core with c/s 2.5 sq.mm Multistrand 4 Core

iii.Signal Cables-armoured Copper Core ...

Earth Mat formation :

Supplying and laying MS.Flat 75 x 8 mm flat welding and applying ACB paint to welded portion and covering without Sodium Bentonite Clay (SBC supplied by Corporation) as per drawi...

Grounding of equipments with 75 x 8 mm G I flat and connecting equipments to the earth mat/ground pit including all connected works with all materials supplied by the contractor.

Providing 32mm dia, 1.075mtr. long Earthmat Spike of MS Rod including bending top 75 mm etc with Sodium Bentonite treatment

Providing C.I. Pipe of 100mm ID 13mm thick 2.75 mtr. long with 2 part GI Flat 50x6mm clamp welded allround the pipe etc., including cost of excavation with Sodium Bentonite treatment (all materials s...

Supplying and fixing 450mm dia x 450mm height 1.5" to 2" Hume pipe collars for earth pits.

Mandatory spares

Circuit Breaker (CB)

Closing coil with resistor (For one Complete Circuit Breaker)

a) for 145KV CB

Tripping coil with resistor (For one Complete Circuit Breaker)

a) for 145KV CB

Terminal Pad (For one Complete Circuit Breaker)

a) for 145KV CB

Terminal Connector (For one Complete Circuit Breaker)

a) for 145KV CB

SF6 Gas (40% of total gas Qty. for Sub-Station at K Basavanahalli))

Isolator : Copper Contract fingers male & female (For one Complete Isolator)

a) for 110KV Class

Terminal Connector (For one Complete Isolator)

a) for 110KV Class

Terminal Pad (For one Complete Isolator)

a) for 110KV Class

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/ Soft rock & depth not exceeding 300mm as per d...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other simillar works etc. in layers not exceeding 20cm depth, consilidating each deposited layer by ramm...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height....

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

Providing and fixing Modular multi-diameter cable sealing system which is waterproof,fire proof& rodent proof consisting of frames,blocks and accessories to be installed wherever the electrical(power/...

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm,aggregate cement rat...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing water based glossy paint (Green cerified product) to kerb stones as per IS 164: 2015 technical specifications including cleaning and surface preparation.

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in super structure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) in...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inc...

Providing 15 cement plaster on rough side of single or half with cement mortor 1:4 to brick masonary including rounding off corners wherever required smooth rendering, providing and removing scaffold...

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface like Roof, bathroom...

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 ...

Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional c...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangment and making necessary holes for inlet, outlet and ov...

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....

Providing & fixing of 3 -track x 2- panel sliding windows made out of multi chambered UPVC (Matching to RAL -9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elas...

Providing & fixing of louvered ventilator made out of multi chambered UPVC (Matching to RAL- 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead ...

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance plus or minus 1mm), with wall thickness 2.0 mm (plus or minus 0.2 mm), ...

30mm thick factory made polyvinyl chloride (PVC) door shutter made of a uPVC hollow section of size 60x30mm and wall thickness 2 mm (plus or minus 0.2 mm), with inbuilt decorative moulding edging on o...

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5mm (heavy type)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...

Providing and fixing Rainy dual capacity self-cleaning roof top rain water harvesting filter or equivalent filter of FL-500 specification suitable for a catchment area of about 500Sqm.

Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engin...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe w...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe w...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...

Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...

Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000 ; 3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per...

SUBMERSIBLE CABLE

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest a...

PRESSURE GAUGE :

Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 100 mm

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm

NON - RETURN VALVE :

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm

Control Panel BOARD-A:

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analo...

POWER CAPACITOR:

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning...

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16...

GALVANISED MILD STEEL TUBES:

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one en...

Erection elctrification & Commissioning works of pumpsets :

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supp...

Erection of panel board & meter board Unit :

Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipmentsincluding provi...

Main connections:

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board un...

Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and ...

Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and ...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 100x75x65mm

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 135x75x65mm

Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF...

Supplying And Fixing Metal Fan Box with Round Hook.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.100 A.

Supplying of on load change over switches 4 poles, AC- 23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution).100 A

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws,bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Ov...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phas...

Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V upto 300mA sensitivity on existing wood/panel board.16-25 A 2 pole

Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V upto 300mA sensitivity on existing wood/panel board.63 A 4 pole

Supplying, fixing and wiring 0 to 1500A CT operated AC analog type Ammeter without CT

Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter.

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50HzAC with latest micro controller based, digital read out of percentage leakage curr...

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Two Way Switch

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Bell Push

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket

Supplyingandfixinghylumplasticsheet 3mmthickwithnecessary nitches for fixing switches, regulators etc., andfixingonexisting wood or metal box using N. F. screws.

Extra for supplying 4 mm thick white plastic plate andcovering for junction boxes of size ...... mm conduit using necessary machine screws. 80/90 mm.

Extra for supplying 4 mm thick white plastic plate andcovering for junction boxes of size ...... mm conduit using necessary machine screws.110 mm.

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Pendant Holder.

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.4...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint....

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply.

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.15" Sweep (450 mm)

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...

Supplying wall mounting fan suitable to operate at singlephase 230v AC. supply.400 mm Sweep

Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4ft - 36/40 W W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than ...

Supplying of recess mounting non integrated type LED down light 18W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT...

Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 2ft - 9/10 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. ...

Supplying and Fixing of........mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket 1x40/2x40 W fluorescent tube street light fitting of all capacities to GI...

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary ...

Extra length of GI pipe of class B 19mm dia for down rod.

Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit. The pit shoul...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

GI/Copper strips for grounding connections, using necessary fixing materials as required.600x600x3mm copper plate

GI/Copper strips for grounding connections, using necessary fixing materials as required.25x3mm copper strip

Grand Total weight of Tower parts- High Tensile Steel

Note: (i)Rate to be quoted on per t Basis.

(ii)Refer Techno-Commercial sheet for detailed break-up

Grand Total weight of Tower parts- Mild Steel

Note: (i)Rate to be quoted on per t Basis.

(ii)Refer Techno-Commercial sheet for detailed break-up

Grand Total weight of Bolts,Nuts& Washers

Note: (i)Rate to be quoted on per t Basis.

(ii)Refer Techno-Commercial sheet for detailed break-up

Tower accessories :

Phase plate (set of 3)

Earth bond 450 mm long

Earth bond 300 mm long

Grounding of towers including cost of 40 mm dia 2.5 mm thick,class 'C' G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metre long, salt, charcoal, including excavation char...

Conductor & Earth wire :

Lynx ACSR Conductor

7/3.15 mm GI Ground wire Plain Terrian

I) Insulator strings and clamps for Lynx ACSR conductor with Hardwares and Arcing Horns as per technical specifications (110kV Line);

NOTE: All the Insulator strings and hardware fittings quoted by th...

B. Suspension insulator strings consisting of any one of the following:

a. Insulator string consisting of 1X7nos. of 90kN Disc insulators

b. Porcelain long rod...

B)Hardwares and Clamps for conductor with Arcing Horns.

Single Tension Insulator with Clamp and accessories suitable for 110kV insulators and Lynx Conductor

Single Suspension Insulator with Clamp and accessories suitable for 110kV insulators and Lynx Conductor

Double Tension Insulator with Clamp and accessories suitable for 110kV insulators and Lynx Conductor

Double Suspension Insulator with Clamp and accessories suitable for 110kV insulators and Lynx Conductor

Accessories for Lynx ACSR Conductor :

MSC Joints suitable for Lynx ACSR

Repair sleeves suitable for Lynx ACSR

P G Clamps suitable for Lynx ACSR

Vibration dampers for Lynx ACSR

Pre formed armour rods suitable for Lynx ACSR

Hardware for Earthwire :

MSC Joints suitable for Ground conductor

Repair sleeves suitable for Ground conductor

Single Tension clamps ( bolted type) suitable for Ground conductor

P G Clamps suitable for Ground conductor

Single suspension clamps ( bolted type) suitable for Ground conductor

Check Survey and Towers Spotting.

Check survey using their own equipment for 110kV Plain terrain

1.The survey covers the scope as defined in Technical Specifications & As per volume -VI of Com...

Stringing of ACSR Conductor without allowing the conductor to touch the ground and without damaging the conductor as per specifications.

Paving out conductor from anchor to anchor normally spaced at 5...

2. 7/3.15 mm GI Ground wire for 110kV Line with lynx ACSR Conductor

Erection of Transmission Line Towers (including tower accessories etc., except GI angle, Barbed wire & Grounding materials) as per specifications.

1.The Bidders are required to quote the rates ...

Supplying and fixing AC devices:

i) Supplying and fixing GI angle iron 45 x 45x5mm (1Mtr length) with cleats, bolts nuts as per specification and fixing above 0.5 mts length each at inner and outer s...

ii) Supplying and fixing Barbed wire as per specification

Grounding of towers including cost of 40 mm dia 2.5 mm thick,class 'C' G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metre long, salt, charcoal, including excavation char...

Dismantling Portion:

Note : 1) The Released materials shall be transported to the nearest Major Works StoreS of KPTCL.

2)The rates quoted for releasing/dismantling shall also include the charges for ...

iii.Releasing & restringing of Lynx ACSR conductor

v.Releasing & restringing of existing ground wire

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant I...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...