Construction of compound wall around 4 nos. Judge Qr. at ADJ Court, Talcher.

Part-A (Civil Work) Dismentalling brick or stone masonary in lime or cement mortar under 3 mtr height including stacking the useful materials for re-use and removing the debries from site with all leads as directed by the Engineer-in-charge including all labour and T&P required for the work etc. including labour cess but excluding GST complete

Earth work excavation in foundation and trenches in hard soil including moorum stoney earth and earth mixed with boulder except sheet rock and boulders requireing blasting including dressing and levelling the bed up to the required depth and depositing the excavated materials with all leads and lifts T&P shoring and shuttering if required etc. including labour cess but excluding GST complete as directed by the Engineer-in-charge

Supplying and filling foundation and plinth with sand in layers not exceeding 150 mm thick well watered and rammed with basic cost, conveyance, royalities, labour, T&P required including labour cess but excluding GST for the work etc. complete

Cement concrete (1:3:6) in foundation and floor i;e below the base course of terrazo flooring using 4cm (1½”) size black crusher hard broken granite aggregates / chips / metal of approved quality and from approved quarry, including lowering, laying concrete, watering curing etc. complete to required level laid in layers not exceeding 1'-6" thick including basic cost, conveyance, royalities of all materials and cost of all labour, T&P. required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge

Fly ash brick masonry in cement mortar (1:6) in Foundation and Plinth using (25x12 x8cm) size bricks after immersing the bricks for six hours in water before its use including, splays cutting, circular moulding and carbelling, champering and similar such type of works watering, curing etc. all complete including basic cost, conveyance, royalties of all materials and cost of all labour, and T&P required for the work etc. including labour cess but excluding GST complete (Crushing strength of bricks should not be less than 75kg to 99 kg/cm2 with dimensional tolerance ±2%)

RCC M20 having compressive strength of 20mpa, target mean strength of 30mpa, for150mm cubes at 28 days curing as per IS-456-2000 & I.R.C-212000 test conducted in accordance with I.S. 516 using 20mm & down graded size crusher broken hard granite coarse aggregate of approved quality and from approved quarry & other materials as per section 302 of I.R.C.21-2000 & IS-456-2000 of approved quality including centering, shuttering & form works for providing smooth & water tight surface, hoisting, lowering & laying concrete in layers not exceeding 30 cm. compacted thickness, compacting with mechanical vibrators true to lines, grades as per drawing & technical specifications, watering & curing for 28 days including basic cost, conveyance, royalties of all materials with all leads & lift, cost of all labour T&P, including labour cess but excluding GST & equipment required for mixing, transporting & placing in position vibrating, compacting, finishing & curing including all incidental expenses complete in all respect as per direction of the E.I.C. but excluding the cost of M.S. rods or Tor steel and binding wire & labour charges for bending binding & tying the grills Foundation

Plinth Band

Lintel band

Chajja (Average 65mm thickness)

Roof Slab

Column & Beam

Supplying, cutting, straightening the bent up M.S. Rods or Tor steel, using SAIL / TATA / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe 5OOD} etc. including bending, binding, welding jointing if necessary and tying the grills and placing in position as required for R.C.C. works and for providing required no of fan hooks hoisting, lowering, laying including basic cost, conveyance of all M.S. Tor steel and binding wires of 18· to 20 gauge as required for the work bending, binding and tying the grills in all floors (Payment will be made on weight of M.S. Tor steel only and no separate payment will be made towards the weight of binding wires) etc. including labour cess but excluding GST complete as per specification & direction of Engineer-in-Charge (First Floor)

Fly ash brick masonry in cement mortar (1:6) in Superstructure using (25x12x8cm) size bricks after immersing the bricks for six hours in water before its use including, splays cutting, circular moulding and carbelling, champering and similar such type of works watering, curing etc. all complete including basic cost, conveyance, royalties of all materials and cost of all labour, and T&P required for the work etc. including labour cess but excluding GST complete (Crushing strength of bricks should not be less than 75kg to 99 kg/cm2 with dimensional tolerance ±2%) as per specification & direction of the Engineer -in-Charge (First Floor)

20mm (3/4") thick grading plaster (1:4) over brick masonary including hoisting, watering, curing, basic cost, conveyance, royalities of all materials and cost of all labour, T&P required for the work etc. including labour cess but excluding GST complete

12mm (½") thick cement plaster (1:6) over brick masonry finished smooth, after racking out the joints including watering and curing etc. with basic cost, conveyance, royalties of all materials and cost of all labour and T&P required for the work etc. including labour cess but excluding GST complete as per specification & direction of the Engineer-in-charge

6mm thick cement plaster (1:4) over brick masonary finished smooth after racking out the joints watering, curing etc. with basic cost, conveyance, royality of all materials, labour, T&P required for the work etc. including labour cess but excluding GST complete

25mm thick grading Concrete (1:2:2) over roof slab using 12mm & down graded size black hard crusher broken granite chips of approved quality and from approved quarry, including finished smooth with proper slope after chipping, chiselling and cleaning the roof slab including hoisting, watering, curing, basic cost, conveyance, royalities of all materials and cost of all labour, T&P required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge

12mm (½") thick cement plaster (1:4) over brick masonary finished smooth, after racking out the joints including watering and curing etc. with basic cost, conveyance, royalities of all materials and cost of all labour and T&P required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge

2.5cm (1") av. thick A.S. flooring with cement concrete of proportion (1:2:4) including punning with black hard crusher broken granite chips laid in two layers the bottom layer being ¾" thick ¼" to ¾" size black hard broken granite chips of approved quality & from approved quarry & Top layer of ¼" thick with 1/8" to ¼" size black hard crusher broken granite chips laid down over 4" dry epidorite metal in ground floor including rounding of corners watering, curing with basic cost, conveyance, royalties of all materials, & cost of all labour, T&P. required for the work etc. including labour cess but excluding GST complete in all floors as per specification & direction of the Engineer -in-Charge

Supplying, fitting and fixing of Vitrified tile in floor of size 600x600mm plain / ivory of approved make conforming to IS 13755 laid on 20mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including basic cost of all materials, labour, T&P etc. required for the work all complete as per direction of Engineer-in-charge

Supplying, fitting and fixing of vitrified tile of size 600x600mm in dado & skirting on 12mm thick bed of cement mortar (1:3) jointed with neat cement slurry mixed with pigments using white cement in grating to match the shade of the tile etc. including basic cost, conveyance, royalties of all materials and labour, T&P required for the work etc. including labour cess but excluding GST complete as directed by the Engineer-in-charge

Supplying, fitting and fixing of ceramic glazed floor tile of size 300x300 mm/ 400x400mm in floor treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigments using white cement in grating to match the shade of the tile etc. including basic cost, conveyance, royalties of all materials and labour, T&P required for the work etc. including labour cess but excluding GST complete as directed by the Engineer-in-charge

Supplying, fitting and fixing of ceramic glazed tile of size 200x300 mm / 200x200mm in dado & skirting on 12mm thick bed of cement mortar (1:3) jointed with neat cement slurry mixed with pigments using white cement in grating to match the shade of the tile etc. including basic cost, conveyance, royalties of all materials and labour, T&P required for the work etc. including labour cess but excluding GST complete as directed by the Engineer-in-charge

Providing fitting and fixing in proper position factory made wooden polymer composite (WPC) door frame having waterproof, termite & borer Proof, no rotting, swell & crack proof, bend & warp resistant properties of size 62 mm x 100 mm (dimension torelance 5 mm, subjected to approval of the EIC, no extra payment will be made for diiference in sizes) conforming to relevant IS specifications, of approved design and drawing fitted to the masonary/ concrete wall with anchor bolts of required size including cost of all materials, labour, conveyance, taxes, T&P etc. including labour cess but excluding GST complete as per direction of Engineer-in-charge. Make:- Ecoste/ Century Ply / equivalent

Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 650kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. of make Rajshri Plastiwood/ Alstone/Aramstrong or euivalant including labour cess but excluding GST as per direction of Engineer-in-charge.

Supplying, fitting and fixing M.S. pannel shutter single/double leaf of approved design in doors and windows including bending and cutting sizes of grooves in choukaths and for over lapping portion shutter where necessary, supplying, fitting and fixing cleats send blocks and fixing oxidized iron or chromium plated, iron aldrops, tower bolts, handles, irons hinges, screws, etc. including labour cess but excluding GST complete as per requirement and any additional fittings as directed by the Engineer-in-charge in all floors

Supplying, fitting and fixing M.S. door & window grills, grill gates made of M.S. flat/square bar of approved specification design fitted & fixed including cutting the grooves in brick or RCC structure and making good to the damages with C.C. (1:2:4), cost of nails, screws but including basic cost of grills, conveyance, of all materials, labour, T&P. etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge

Providing and fixing at all height false ceiling of 12.5mm thick tapered edge gypsum board confirming to IS:2095 including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvernised in accordance with zink coating 600 as per IS:277 and consisting of angle cleats of lsize 25mm wide x 16mm thick kwith flanges of 22mm and 37mm at 1200mm c/c one flange fixed to the ceiling with dash fastner 12.5mm dia x 40mm long with 6mm dia bolts to the angle hangers of (25x25x5)mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45mm x 15mm x 0.9mm running at the rate of 1200mm c/c to which the ceiling section 0.5mm thick botton wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm c/c shall be fitted in direction perpendicular to the G.I. channel with connecting clips made out of 2.64mm dia x 230m long G.I. wire at every junction including fixing the gysum board with ceiling section and perimeter channel l0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partition with the help of rawl plugs at 450mm c/c with 25mm long drive-all screws at the rate of 230mm in interval including jointing and fixing to a flush finished tapered and square eges of the gysum board with recommended filler, paper tapes, finisher and 2 coats of primer suitable for gysum board as per manufacture, specification and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitable fixed all complete as per drawing and specification and direction of the Engineer-in-charge

Supplying, fitting and fixing up window (sliding type) made of aluminium, section 9778 all window frame section No. 4095, 4096 & 9777, 3994 all shutter frame as panel ftted with rubber beading including lucking arrangement including all fitting, basic cost of materials, labour, T&P. etc. including labour cess but excluding GST complete as per direction of Engineer-in-charge

5mm thick black glass

Distempering two coats with any approved shade over interior surface of walls and ceiling including labour, T&P. and cost of distemper required for the work etc. including labour cess but excluding GST complete as per direction of Engineer-in-charge

Finishing wall surfaces of wall with weather coat (Peach bloom) two coats over a coat of water bound cement primer to outer surface of walls including basic cost, conveyance, of all materials, all labour, T&P. required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge

Finishing wall surfaces of wall with acrylic wall primer (water bound) two coats over inside & outside surface of wall including basic cost, conveyance, of all materials, all labour, T&P. required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge

Painting two coats with paints of approved shade in all floors to wood and iron works including sand papering, polishing the surface, basic cost, conveyance, of all materials, all labour and T&P. required for the work including labour cess but excluding GST including the cost of paint and primer as per the direction of the Engineer-in-charge

Providing fitting and fixing of Barbed wire including tying the wire with angle iron frame of size 40mm x 40mm x 6mm by G.I.wire including basic cost, conveyance of all materials, cost of all labour, T&P. required for the work etc. including labour cess but excluding GST complete as per direction of Engineer-in-charge

Please Enable Macros to View BoQ information