Construction of Community hall (Type-1) at Nallanayagapuam AD colony in Vanchinapuram Panchayat in Sendurai Block of Ariyalur District Under MPLADS 2022-23

Amount

Earthwork excavation for foundation in all soils and sub-soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth

Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Cement Concrete 1:4:8 (One Cement, Four sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Brick work in Cement Mortar 1:5 using best quality Country bricks of size 8"3/4 x 41/4" X2 3/4" for foundation and basement including curing etc., complete complying with standard specification. Including scaffolding curing cost of reinforcement etc. all complete as per specifications and drawings as directed by the Engineer in-charge.

Supplying and erecting Centering and Shuttering for soffits including necessary supports and strutting up to 3 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specification.(Payment for centering shall be given after the concrete is laid).

Up to basement

Above basement

Supplying and fabrication of steel for RCC works including cost and conveyance to site and all labours charges etc., complete

RCC 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all all labour charges etc., complete

Brick jelly lime concrete by using 20mm brick jelly with lime in the ratio of 32 : 12.5 including cost and conveyance of all materials to site and all all labour charges etc., complete

Finsishing the top of roof with one course of pressed tiles of size 20 x 20 x 2 cm laid in CM 1:3 and pointing with the same mortar mixed with water proof compound including cost and conveyance of all materials to site and all all labour charges etc., complete

Special ceiling plastering with CM 1:3 10mm thick including cost and conveyance of all materials to site and all all labour charges etc., complete

Plastering in Cement Mortar 1:5 mix, 12mm thick including cost and conveyance of all materials to work site and all labour charges etc., complete.

Plastering in Cement Mortar 1:3 mix, 20mm thick including cost and conveyance of all materials to work site and all labour charges etc., complete.

Providing Granolethic floor finish in Cement concrete 1:2:4 mix using 10 - 12mm ISS HBG metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing, etc., complete as per standard specification

Paving the floor with scratch proof ceromic tiles any colour and any size laid CM 1:2, 20mm thick and pointing including cost and conveyance of all materials to site and all labour charges etc., complete

Dadoodling the walls with colored glazed tiles approved size, quality and color set in CM 1:3 - 10 mm thick. And pointed with suitable cement including finishing the joint and pointing flesh with walls and tile surface in all floors at the rate of 0.40 Kg /Sqm etc. complete. Basic cost-Rs.318/sq.m

Supply of the following steel doors, windows and ventilators to office etc., complete

Main door 1.80 x 2.10m

Door 0.90 X 2.10m

PVC Door 0.75 x 2.10m

Window 1.50 x 1.30m

Window W1 0.90 x 1.30m

Ventilator 0.90 x 0.45m

Ventilator 0.60 x 0.45m

Supply of the following PVC pipes and PVC specials etc., completee for seewage line and rainwater down fall pipe with necessary bend, shoes and clamp and labour charges etc., complete

110mm PVC pipe

Filling 40mm ISS HBG metal

Filling 20mm ISS HBG metal

Supply of manhole cover 60 x 60 cm

Painting two coats of Oil bound distember of approved colour over one primer coat including cost of paint and labour charges etc., complete

Exterior emulsion painting two coats with best approved quality and colour paint over one coat of base coat including cost and conveyance of all materials to work site and all labour charges etc., complete.

Painting two coats with ready mixed paint including cost and conveyance of all materials to work site and all labour charges etc., complete.

Towards conveyance charges for steel door, windows, ventilators form office to work site

Labour charges for fixing of steel doors

Supply and fixing of cuddapah slabs including cost and conveyance of all materials to work site and all labour charges etc., complete.

Labour charges for fixing of steel windows

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point SD No38

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed SC copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with TW switch box and 5A FT switch in flush with wall with 3mm thick hylum sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator) SD No 24

Supply and fixing of 18w CFL in the existing light point

Supply and fixing of 32A DP switch of 500V with matal clad with fuse and neutral (side handle) on suitable TW board with earth connection only SD No 142

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade on 7/20 GI bearer wire for service connection mains SD 64

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mm dia GI suitable pipe b class suitably bended both ends with necessary angle iron up right and end support

Supply and fixing of WT bulk head fitting with guard for incandecent lamb with 60w bulb SD 85

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") SD No 106

Provision for lock and key

Provision for WC

Provision for Name board charges

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Panneerselvam