Repair to water supply sanitary fittings, door/windows, joinery including glazing, and other B R repairs at certain buildings at Y Stn under GE Satwari

Amount

Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each and removing from the site all as specified & directed.

Taking down shutters of any description exc 2.00 Sqm each and removing from the site all as specified & directed.

Taking down chowkats or frames with shutter (with out taking off shutter from the frame) n exc 1.5 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.

Taking down chowkats or frames with shutter (with out taking off shutter from the frame) exc 1.5 sqm & n. exe 4 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.

Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material exc 100 mtr as specified.

Demolition of cement concrete (unreinforced) ground floor to 4th floors and pavings n exc 15 cm thickness (below or above ground level ) and removing unserviceable material exc 100 mtr as specified.

Demolition of reinforced cement concrete of any discription ground to 4th floors and removing unserviceable material exc 100 mtr as specified.

Taking down cement plaster of any description on brick or stone walls or from concrete surface incl raking out joints, hacking for key, scrubbing down with water etc all as specified,and removing unserviceable material outside the premises.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Dismantling of ceiling board(Fibre,pulp,,any type of insulation etc) or insulation board / slabs/any thickness including cover fillets

Dismantling timber scantlings 40 sq. cm and over in section, in any position ( framed work) complete all as specified.

Ditto as item No 11 in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section framed Work) all as specified.

S & F pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 105 x 60mm including one coat of red oxide primer and PCC 1:3:6 as in back fill to chowkats all as spfd.

S & F pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 125 x 60mm including one coat of red oxide primer and PCC 1:3:6 as in back fill to chowkats all as spfd.

M&L 35 mm thick 2nd class hard wood, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply. The size of rail and stile as per IS : 1003 (Part I), complete all as speciied.

S&F 35mm thick 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive gauge etc without sash bar but with lock rail fitted with cut and mitered beads.

M&L Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified. Note:- Sampel approved by Engr-in-Charge or GE.

S&F 35 mm thick factory made moulded door shutter cinsisting of solid core single leaf flush door of 30 mm thickess, lipped with 15 mm (5x3mm) thick x 30 mm width on one stiles and top rails &10 mm (5mmx2) thick x30 mm width on the order stiles & bottom rail. The inner panel laminated with 2mm thick PVC sheet of Density 600 Kg/Cbm, Manufactured by an ISO-9001-2015 certified complany, termite proof, water proof and fire resistant moulded PVC sheet with2,4,6 raised panel design in different plain and/ or prelam colours on one side after routing the mouided design on flush door & 2mm plain and/or prelam PVC sheet on other side using rubbed based adhesive on flush door & solvent cement adhesive on the PVC liping etc, complete as per direction of Engr-in-charge.

S&F in repair Soild PVC door frame of size 50 mm x 47mm made out of 5 mm plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening as per specification and drawing.

S & Fin repair Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame work made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour P.V.C‘ C’ channel having a PVC sheet strip 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement S&F in frame at site as per specification.

Pressed steel cup board frame of MS sheet 1.25 mm thick size of frame 60 x 40 mm with rebate of 20 mm wide and 12 mm deep including PCC 1:2:4 as in filling to back of chowkats including butt hinges 100 mm long. Piano hinges measured separately.

S & F in repair continuous (piano) hinges, heavy duty mild steel, bright finish or electrogalvanised sutable for 19mm thick shutter and fixed, complete all as specified. ( ISI Marked)

S&F in repair Material & labour for 18/19 mm thick MDF board as in shutters/shelves etc exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed to frame work with leaping (15 mm thick three side and 20mm thick leaping hinge side) around the shutter and fix with screws to etc complete all as specified and directed. Make:-

M&L 18 mm thick PVC board one side UV printed designing and back side plain colour printed for cub board boxes or kitchen cabinet with shelf, drawer, shutter and frame full size fitted under cooking platform and other platform including fittings etc complete all as specified and directed.

S & F butt hinges of mild steel cold rolled medium weight of size 100mm as specified.

S&F Aluminium anodised, barrel tower bolts size 200 mm of extruded section and fixed complete all as specified. (ISI Marked)

S&F Aluminium handles, cast type, anodised Size-150mm, anodised section and fixed complete all as specified. (ISI Marked)

S&F Aluminium alloy, anodised, sliding door bolt Size- 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

S&F aluminium Floor door stopper fixed complete all as specified.

S&F in repair magnet door catcher complete all as specified.

S&F in repair magnet door catcher for cupboard shutters complete all as specified. (ISI marked)

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified. ( ISI Marked)

S&F in repair aluminium bottom door seal with brushes, length 1.2 mtr, fix with screw, suitable for wooden door complete all as specified.

S&F in repair aluminium extruded section body, door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.

S & F in repair mild steel helical/ordinary rat tail rod pattern door spring 300mm including roller and roller plate complete fixed with welding all as specified.

Repair/ easing of wooden door any type, glazed or panelled, by triming the side of door shutter where rubing with chowkhat, unscrew the hinges screws and lift the door and fix with screds, titening of wire mesh etc all as per Engr-In-Charge.

Material and labour for repairing aluminium shutters including refixing, tightening and making good with using rubber/beads and others small fixtures/fittings (door handles, door stoper etc), if required and making serviceable all as specified and directed by Engr-in-charge.

Material and labour for repairing Aluminium door locks ( Sample approved by Engr-in-charge)

S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20-22 gauge and with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clesr opening of doors/windows. ( Including necessary fittings)

M&L Aluminum Power coated, sliding windows three track with mosquito proofing with style 44.4x44.5x2mm thick including 4.0 mm thick coloured/tinted/frosted glass panes including aluminium grill and all necessary fittings and fixtures complete all as per Engr-in-charge.

Supply and fixing 5.0 mm thick (minimum) glass sheet ordinary quality frosted and glazed in squares, exceeding 0.5 Sqm in each pane.

Supply and fixing 4mm thick aluminium composite panel (coloured sheet) and in additional other accessories for fitting complete all as specified by Engr-in-Charge.

S&F in repair Brass Mortice lock with brass handles and fittings , 4 lever vertical type, size 65 mm including complete accessories complete all as specified.

Supply and fixing in repair double action door spring hydraulically regulated (heavy duty) made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass other parts made of mild steel heavy duty. (ISI Marked)

S&F steel window/ventilator 1.25 mm thick Box type double shutter (primer coated) ERW hollow P section of size 60 mm x 25 mm single rebated comprises glazed skelton/ gauged skelton shutter ERW sec 50 mm x 20 mm and 1 mm thick with two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of ERW box type T- section of size 60 mm x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window incl following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS tower bolt 150 mm long 2 No per leaf, Z sec 20 mm x 25 mm, 100 mm long stopper 1 No on per leaf, MS Pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication and fixing arrangement as per drg No CEPZ/TD-324,325/07.

S&F Mild steel works of flat iron, square bar, round bars etc. as in framed work such as grills, guard bars, gratings etc incl bending, cutting and welding as necessary of confirming to Gde Fe 310-0 all as specified.

Hacking out old broken glass (any thickness,size quality or description) from any types of wooden/steel/alum (up to 4th storey) frames or stone concrete or brick surrounds glazed with putty or fixed with beads.

S&F 3 mm thick sheet glass ordinary quality glazing with steel pins,oil putty to steel windows and, beads nails etc to wooden surfaces as in square exc 0.50 sqm in each pane, all as specified.

S&F 3 mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane.

S&F in repair Stainless steel wire cloth. 0.46mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples

S&F in repair Single Lever Basin Mixer without Popup waste with 450mm Long Braided Hoses fancy type complete all as specified. Make:- Jaguar, Cat No:- OPP-15011BPM or equivalent in kohler/Artize.

S&F in repair Single Lever Tall Boy with 150mm Extension Body Fixed Spout without Popup Waste System with 600mm Long Braided Hoses fancy type complete all as specified. Make:- Jaguar, Cat No-OPP-15005BPM or equivalent in kohler/ Artize.

S&F in repair Single Lever Wall Mixer 3-in-1 System with Provision for Both Hand Shower & Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (Without Hand & Overhead Shower) fancy type complete all as specified. Make:- Jaguar, Cat No-OPP-15125PM or equivalent in kohler/ Artize.

S&F in repair Single Lever Exposed Part Kit of Hi-Flow Diverter Consisting of Operating Lever, Wall Flange (with Seals) & Button Only (Suitable For Item ALD-079) Make:- Jaguar, Cat No-OPP-15079KPM or equivalent in kohler/ Artize.

S&F in repair concealed Body for Single Lever High Flow Diverter with Button Assembly, Cartridge Sleeve But without Exposed Parts Make:- Jaguar, Cat No-ALD-079 or equivalent in kohler/ Artize.

S&F in repair angular stop cock with wall flange , cast copper alloy, chromium plated fency type screwed with wall flange sutable for 15 mm iron pipe, complete all as specified. Make:- Jaquar, Cat No:-OPP-15053PM or equivalent in kohler/ Artize.

S&F in repair Exposed Part Kit of Concealed Stop Cock & Flush Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange with Seal (compatible with ALD-083, ALD-089 & ALD-081) Make:- Jaquar, Cat No- OPP-15083KPM or equivalent in kohler/ Artize.

S&F in repair Regular Body of Concealed Stop Cock Suitable for 15 mm Pipe Line with Protection Cap (without Exposed Parts) Make:- Jaquar, Cat No:-ALD-083 or equivalent in kohler/ Artize.

S&F in repair Bib Cock with Wall Flange cast copper alloy, chromium plated fency type screwed with wall flange sutable for iron pipe, 15 mm bore complete all as specified. Make :- Jaquar, Cat No:- OPP-15037PM. or equivalent in kohler/ Artize.

S&F in repair Hand Shower 120mm dia Round Shape Multi Flow with Cascade Effect (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System complete all as specified. Make :- Jaquar, Cat No- HSH-CHR-1731 or equivalent in kohler/ Artize.

S&F in repair Sink Mixer with Swinging Spout (Wall Mounted Model) with Connecting Legs & Wall Flanges complete all as specified. Make:- Jaquar, Cat No- CQT-23309 or equivalent in kohler/ Artize.

S&F in repair Sink Cock with Swinging Spout (Wall Mounted Model) with Wall Flange complete all as specified. Make:- Jaquar, Cat No:- CQT-23347 or equivalent in kohler/ Artize.

S&F in repair Exposed Part Kit of Single Lever Basin Mixer Wall Mounted Consisting of Operating Lever, Wall Flange, Nipple & Spout (Suitable For Item ALD-233 & ALD-235) complete all as specified. Make:- Jaquar, Cat No:-OPP-15233KPM or equivalent in kohler/ Artize.

S&F in repair Concealed Body for Single Lever Basin Mixer Wall Mounted with Cartridge Sleeve But without Exposed Parts complete all as specified. Make:- Jaquar, Cat No:-ALD-233 or equivalent in kohler/ Artize

S&F in repair Single Lever Sink Mixer with Swinging Spout (Table Mounted) with 450mm Long Braided Hoses complete all as specified. Make:- Jaquar, Cat No:- OPP-15173BPM or equivalent in kohler/ Artize.

S&F in repair 2 way CP Bib Cock with wall flange, cast copper alloy, chromium plated fency type, sutable for 15 mm GI pipe, complete all as specified. Make :- Jaquar, Cat No:- OPP-15041PM or equivalent in kohler/ Artize.

S&F in repair CP Pillar Cock Auto Closing System with 65mm Extension Body complete all as specified. Make:- Jaquar, Cat Part No- PRS-CHR-031L65 or equivalent in kohler/ Artize.

S&F in repair CP Urinal Valve Auto Closing System with Built-in Control Cock & Wall Flange. Make:- Jaquar, Cat Part No- PRS-CHR-077 or equivalent in kohler/ Artize.

S&F in repair Cromium plated, single towel rail 600mm long complete all as specified. Make:- Jaquar Cat No- AKP-CHR-35711P or equivalent in kohler/ Artize.

S&F in repair Cromium plated, towel ring square, complete all as specified. Make:- Jaquar Cat No- AKP-CHR-35721P or equivalent in kohler/ Artize.

S&F in repair soap dish holder complete all as specified. Make:- Jaquar, Cat No- AKP-CHR-35731P or equivalent in kohler/ Artize.

S&F in repair soap dispenser with glass bottle, complete all as specified. Make:- Jaquar, Cat No- AKP-CHR-35735P or equivalent in kohler/ Artize.

S&F in repair Tumbler Holder, complete all as specified. Make:- Jaquar, Cat No- AKP-CHR-35741P or equivalent in kohler/ Artize.

S&F in repair cromium plated toilet roll holder, complete all as specified. Make:- Jaquar, Cat No- AKP-CHR-35751P or equivalent in kohler/ Artize.

S&F in repair Glass shelf 600mm long, complete all as specified. Make:- Jaquar, Cat No- AKP-CHR-35771P or equivalent in kohler/ Artize.

S&F in repair Corner Glass Shelf (with Bracket) as per directed by Engr-in-charge. Make:- Jaquar, Cat No- ACN-1173 or equivalent in kohler/ Artize.

S&F in repair cromium plated towel rack 600mm long without lower hangers, complete all as specified. Make :- Jaquar Cat No- AKP-CHR-35781PS or equivalent in kohler/ Artize.

S&F in repair 450mm Long Braided Hose with Two 15mm Nuts & Rubber Washers (Both Side) Without Nipple (Suitable for Geysers) complete all as specified. Make :- Jaquar, Cat No- ALD-CHR-805B or equivalent in kohler/ Artize.

S&F in repair 450mm Long Braided Hose with M10X1 Nipple, 15mm Nut, O-Ring & Rubber Washer (Suitable for Basin Mixers) complete all as specified. Make :- Jaquar, Cat No- ALD-CHR-803AB or equivalent in kohler/ Artize.

S&F in repair Overhead Shower 100mm dia round shape single flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning Systemr, complete all as specified. Make :- Jaquar, Cat No- OHS-CHR-1989 or equivalent in kohler/ Artize.

S&F in repair Overhead Shower 200X200mm dia round shape single flow (ABS Body Chrome Plated with Gray Face Plate) with rubit cleaning system complete all as specified. Make :- Jaquar, Cat No-OHS-35497 or equivalent in kohler/ Artize.

S&F in repair Shower Arm Casted 190mm Long Light Body Round Shape for Wall Mounted Showers with Flange & 100 mm long CP nipple complete all as specified. Make :- Jaquar, Cat No- SHA-CHR-483 or equivalent in kohler/ Artize.

S&F Maze Overhead Shower 300x300mm Square Shape Single Flow (Body & Face Plate Stainless Steel with Chrome Finish) with Rubit Cleaning System complete all as specified. Make:- Jaquar, Cat No- OHS-CHR-1639 or equivalent in kohler/ Artize.

S&F in repair Shower Arm 600X25X25mm Square Shape for Wall ounted Showers with Flange complete all as specified. Make :- Jaquar, Cat No- SHA-455L600. or equivalent in kohler/ Artize.

S&F in repair Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories Set and Accessories Set,Cistern fittings, Size: 660 x 365 x 765mm, S Trap-300mm complete all as specified. Make :- Cera, Cat No- S1013105 or equivalent in Jaquar/kohler/ Artize.

S&F in repair Urinal with complete accessories Set, cp waste cuppling, waste pipe, sprader etc. Size: 375 x 390 x 590mm complete all as specified. Make:- Cera, Cat No- S4020112 or equivalent in Jaquar/kohler/ Artize.

S&F in repair Urinal with complete sensor and accessories, and cp waste cuppling, waste pipe, sprader etc. Size: 360 x 330 x 740mm complete all as specified. Make:- Cera, Cat No- S4010101 or equivalent in Jaquar/kohler/ Artize.

S&F in repair urinal sprader complete all as specified complete. Make:- Cera, Cat No- F8070201 or equivalent in Jaquar/kohler/ Artize.

S&F in repair Urinal partition fixing accessories complete all as specified. Make:- Cera, Cat No:- S4090101 or equivalent in Jaquar/kohler/ Artize.

S&F in repair cromium plated bottle trap (with internal partition) 32mm size with 250mm & 190mm long wall connection pipe & wall flange., complete all as specified. Make :- Jaquar, Cat No- ALD-CHR-769L250X190 or equivalent in kohler/ Artize.

S&F Table Top Basin, with CP coupling & PVC waste pipe complete all as specified. Make :- Cera, Cat No. S2020114 or equivalent in Jaquar/ Kohler/Artize.

S&F in repair under counter basin with fixing accessories set, size: 560 x 470mm, Oval shape, including CP cuppling and PVC waste pipe complete all as specified. Make :- Cera, Cat No- S2030104 or equivalent in Jaquar/ Kohler/ Artize.

S&F in repair Wall Hung Basin with Fixing Accessories Set, Size : 510 x 400mm, including cuppling and pvc waste pipe complete all as specified. Make :- Cera, Cat No- S2040101 or equivalent in Jaquar/ Kohler/ Artize.

S&F in repair full pedestal for WHB complete all as specified. Make :- Cera, Cat No- S2090101 or equivalent in Jaquar/ Kohler/ Artize.

S&F CP waste cuppling Click Clack Waste 32mm Size Full Thread With 80mm Height complete all as specified. Make :- Jaquar, Cat No- ALD- 727.

S&F in repair cromium plated waste coupling 32mm full thread with 80mm height, complete all as specified. Make :- Jaquar, Cat No- ALD-CHR-705 or equivalent in kohler/ Artize.

S&F Grab Bar 300mm Long, Stainless Steel complete all as specified . Make:- Jaquar, Cat No;- AKP-35701PS.

S&F in repair Wall Hung twin flush Cistern with Drainage L-Bend Pipe with Gasket & Installation Kit (Suitable for EWC), complete all as specified. Make:- Cera, Cat No- B1020106 or equivalent in Jaquar/ Kohler/ Artize.

S&F in repair Vitreous china wash down water closet white colour, Size(570x390x400) with 'S' trap, closed pattern with flat bottom, complete all as directed. Make:- Cera, Cat Part No- S1051103 or equivalent in Jaquar/ Kohler/ Artize.

Supply and fixing PVC Seat cover for EWC pan (White ) of standardd quality including hinges bolt etc all as directed by Engr-In-Carge.Make: CERA,Cat No- B1510107. or equivalent in Jaquar/ Kohler/ Artize.

Supply and fixing PVC Waste pipe 32mm bore for required length complete with waste coupling .Make: Prayag Cat No 329.or equivalent in Jaquar/ Kohler/ Artize.

Supply and fixing PVC Waste pipe for required length complete sutable for waste coupling .

M&L 18 to 20 mm thick Granite black (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over 15 mm thick CM 1:4 as directed by Engr-in-charge.

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.

M&L for Reinforced cement concrete 1:2:4 (nominal mix) as in slabs supported on walls, beams and coloumns and the like slab laid in slops all as specified and directed.

S&f mild steel deformed bars 10 mm dia and over cut to length bent to shape required including cranking hooking ends & binding with and including MS wire (annealed) not ness than 0.9 mm dia etc. all as spfd.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified.

M&L for PCC 1:2:4 type B 1 using (20 mm graded aggregate) as in blocks for hold fasts, benching, coping apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating all as specified and direct. Note: Form work required for these items included in the unit rate of this item.

S&F in repair Jet Spray (Stainless Steel) with 1 meter PVC Tube complete all as specified. Make:- Essco, Cat No- ALE-547 or equivalent in Jaquar/ Kohler.

S&F in repair cromium plated hand shower (health faucet) with 8mm dia 1.20m long flexible tube and wall hook, complete all as specified. Make :- Jaquar, Cat No- ALD-CHR-573 or equivalent in Kohler/ Artize.

S&F in repair WC Orissa pattern white with integral foot rest 585x 445 mm including L bend, & PCC bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe compete all as specified.(Rate of including in taking out and removal of old WC seat unhygienic condition) Make:- Cera, Cat Part No-S3010109 (COVYNA) or equivalent in Jaquar/ Kohler/ Artize.

S&F in repair PVC connection 15 mm x 450 mm including PVC check nut at both ends screwed for iron pipe of 15 mm bore. Make:- Prayag, Cat No:- 323 or equivalent in Essco/Jaquar.

Dismantling/ disconnecting/ demolition of water storage tank of any type or description (RCC/PVC/Bricks etc) and removing from site or refixing in position.

S & F white colour rotational moulded polythylene water storage tank with float valve, plastic lid cover, triple layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 1000 ltrs incl making connections complete all as specified.

S&F white color rotational moulded polyethylene water storage tanks with float valve, plastic lid cover, triple layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 500 ltr incl making connection completed all as specified.

S&F in repair Stop valves, (sutable for 25mm bore pipe) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. (ISI Marked)

S&F in repair Stop valves, (sutable for 20 mm bore pipe) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. (ISI Marked)

Supply and fixing float valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of bore 20mm. ( including necessary fittings)(Min weight 210gm).

S&F PVC tank cover for 500/1000 ltr PVC water tank fix with necessary fittings complete all as specified and directed by Engr-in-charge.

Disconnecting of water tank of 1000 ltr capacity setting aside (or lowering if required) cleaning and removing all scale and dirt etc etc from tanks and from mouths of pipes etc. scrapping silt, scale, fungus with wire brush from water tanks and removing all scale and dirt etc from water tanks and removing water to a distance 50 meters from the building, cleaning the tank with fresh water, cleaning the mouth oh pipe, refixing all G.I fittings and float valve, making functional all out going G.I connections from tanks and float valves and marking the date of cleaning with white paint on tanks for, cleaning and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed.

Taking down GI tubing of 15 mm dia and connection and incl cleaning for refixing or removel all as spfd.

Taking down GI tubing of 20 mm dia and connection and incl cleaning for refixing or removel all as spfd.

Taking down CPVC pipe 20 mm/25 mm dia and connection and incl cleaning for refixing or removel all as spfd.

S&F 20 mm outer dia CPVC pipe with all fittings (Brass Elbow, Brass reduser, Brass Tee, Female Brass Threaded Adaptor( FBTA), Male Brass Threaded Adaptor ( MBTA), Tank Adaptor, UNION, BALL VALVE, CPVC Flange and ect) and fixed complete wall and ceiling or laid in floors.

S&F 25 mm outer dia CPVC pipe with all fittings (Brass Elbow, Brass reduser, Brass Tee, Female Brass Threaded Adaptor( FBTA), Male Brass Threaded Adaptor ( MBTA), Tank Adaptor, UNION, BALL VALVE, CPVC Flange and ect) and fixed complete wall and ceiling or laid in floors.

S&F 15 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors. Make:- Jindal/ Prakash Surya.

S&F 20 mm dia galvanized pipes medium grade with all fittings and fixed complete to wall and ceiling or laid in floors. Make:- Jindal/ Prakash Surya.

Fixing only 20 mm dia tubes, any grade, to walls and ceilings or laying in floors.

S&F in repair stainless steel gratings of outer frame dia 100 mm openable type incl all necessary fittings such as hinges including embeding in tiles with white cement. Make:- Prayag, Cat No- FT-03, or FT-04.

Taking down CI/PVC pipes 100 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.

Taking down CI/PVC pipes 75 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.

S&F UPVC (SWR) Type-B, pipes single socketed, 110 mm dia, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S&F UPVC (SWR) Type-B pipes single socketed, 110 mm dia, in any length with rubber ring joints, laid in trenches or on wall complete all as specified.

S&F UPVC (SWR) Type-B pipes single socketed, 75mm dia, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S&F UPVC (SWR) Type-B pipes single socketed, 75mm dia, in any length with rubber ring joints, laid in trenches or in wall complete all as specified.

S&F UPVC (SWR) Type-B bends, 75 mm any radius complete all as specified.

S&F UPVC (SWR) Type-B bends, 110 mm any radius complete all as specified.

S&F UPVC (SWR) Type-B junction single, 75mm (Single T) equal or unequal complete all as specified.

S&F UPVC (SWR) Type-B junction single, 110 mm (Single T) equal or unequal complete all as specified.

S&F UPVC (SWR) Type-B, floor trap, (75mm diameater for outlet in mm), plain with grating including jointing with solvent cement complete all as specified.

S&F UPVC (SWR) Type-B multi floor trap with grating including jointing with solvent cement (75mm diameater for outlet in mm) complete all as specified.

S&F UPVC (SWR)Type-B gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.

S&F UPVC (SWR) Type-B vent cowl 75 mm dia complete all as specified.

S&F UPVC (SWR) Type-B reducers 110 mm dia complete all as specified.

S&F UPVC (SWR) Type-B branch piece, 110 mmm bore, single (single Y) equal or unequal cpmplete all as specified.

S&F UPVC (SWR) Type-B branch piece, 75 mmm bore, single (single Y) equal or unequal cpmplete all as specified.

S&F UPVC (SWR) Type-B 'P’ trap 110 mm, complete all as specified.

M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified.

M & L Glazed digital ceramic tiles in vertical surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over 10 mm thick CM 1:4 all as specified. Make : Somany,Kajaria, ( sample as approved & kept in GE's sample room)

M&L Non - skid digital, anti scratch, anti fungus, Ceramic joint less colored tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over 15mm thick screed bed in C:M 1:4. Make : Somany,Kajaria,Orient ( sample as approved & kept in GE's sample room)

-ditto- as per item no. 152 but as in verical surfaces skirting over a backing coat of CM 1:4,10 mm thick complete etc.

M & L Non - skid anti scratch, anti fungus, digital Ceramic coloured joint less tiles 8 to 10 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15 mm thick screed bed CM 1:4. Make : Somany,Kajaria, ( sample as approved & kept in GE's sample room)

-ditto- as per item no. 154 but as in verical surfaces skirting over a backing coat of CM 1:4,10 mm thick complete etc.

M& L Virified digital ceramic (double charged) any shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in C:M 1:4. Make : Somany,Kajaria, ( sample as approved & kept in GE's sample room)

-ditto- as per item no 156 but as in verical surfaces dado/ skirting over a backing coat of CM 1:4,10 mm thick complete etc.

M&L 25 mm thick PCC 1:2:4 type B-1 using 20 mm stone aggregated as in floor finished rough.

M&L GI frame work for seamless ceiling comprising of gypframe channels of thickness 0.5 mm (27mm wide and having two flange of 20mm and 30mm) along perimeter of ceiling, Screw fixed to brick wall/Partition with the help of nylon sleeves and screws, at 610mm centers to center and intermediate channels 0.91 mm thickness & 45 mm wide (with two flanges of 15 mm each from the soffit at 1200 mm center to center with ceiling angle (0.5mm thick) of width 25mm x 10 mm fixed to soffit with GI cleat and steel expansion fasteners (mfg by saint Gobin Gyproc) and then Gypframe ceiling section (0.5mm thick) 80 mm wide having two flange 26 mm each at 600mm center to center including S&F single layer of 12.5 mm tapered edge Gyptone fixed to in then screw fixed to ceiling section with 25 mm Drywall screws at 230 mm centers Screw fixing is done mechanically either with screw drive or drilling machine with suitable attachment finally squared and tapered edge of the boards are to be jointed and finished so as to have a flush look which filling and finishing with Gyproc jointing compound, Gyprock joint paper tape( Make:- Saint Gobin Gyproc india or equivalent make as per apex 'f' approved by GE.

Supply and fixing in repair roller blinds with control unit made of high strength reinforced plastic,clutch with wrap spring design,operated by endless beaded chain including idler mounted on bracket by plastic lock center shaft and aluminium exluded rail powder coated including braces ,anodised tube of high strength alloy roller tube,bottom rail (aluminium extruded tube and 4.5 mm thick plaster beads on 2.2 mm thick polyster chord operating chain,colour and pattern as per Engr- in-charge /GE.. Make Vista or equivalent in Tesla

S&F sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm x 203mm & bowl size 405mm x 354mm x 203mm complete with waste coupling & PVC waste pipe complete all as specified and directed by Engineer-in-charge. Make:- Prayag, Cat No- 1239D & equivalent in Nirali, Jayana.

Supply and fixing in repair sinks made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 460mm x 405mm x 203 mm bowl size 405mm x 354mm x 203mm complete with waste coupling & PVC waste pipe complete all as specified and directed by Engineer-in-charge. Make: Prayag, Cat No- 1216D & equivalent in Nirali, Jayana.

S & F Kitchen stainless steel plate rack made out of 1 mm thick sheet and having partions as per sample. The over all size 31x36x10 inch fixed with steel fastners or steel screw complete. Make:- Prayag, Cat No- P-348 and equivalent in Jayana.

Supply and fixing in repair framed shower enclosures corner entry (Size 1200 mm x 1200 mm x 1950 mm ) shower enclosure with door sliding to both sides -4 parts glass 6 mm thick chrome finish complete all as specified. Make : Jaquar Cat No BKT-CHR-31651200X or equivalent in kohler/ Artize.

Supply and fixing in repair shower panel size 1600 x 230 mm with Movable ABS top shower, Moveable ABS body massaeg jets, Hand shower with flexible hose, 40cm stainless steel braided hose Brass Spout, Thermostatic Mixer with diverter, Anti-finger print stainless steel body complete all as specified. Make :- Jaquar, Cat No-JPL-SSF-ST8896 or equivalent in kohler/ Artize.

Removing old brick tiles and removing from site and clean the surface of roof, with cleaning with water and remove dust complete all as specified.

M&L complete removal of the existing roof treatment, taken out membrane etc, including grabbing up of tree roots, roughing and preparation surfaces of old concrete floor by picking, scrubbing down with steel brushes, sweeping clean and washing down with water to remove dust etc and PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) with average thickness 50 mm laid in two layers of 25 mm thickness each with wire netting of 0.60 mm dia and size of mesh 12 mm x 12 mm laid between the two layers finished even and smoothes in roof padding all as specified and as directed Note:- The wire mesh shall be measured and paid separately under the respective item below.

Supply only 25 mm size, wire netting of galvanized iron chicken mesh, 0.71 mm dia complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on other than fair face of brick work/ stone wall surfaces finished even and smooth with out using extra cement all as specified.

M&L for rendering 15 mm thick in CM 1:4 on fair face of brick work/ stone wall surfaces finished even and smooth without using extra cement all as specified. ( incl all necessary scaffolding, lifting arrangement for three story building on external surfaces).

Material and labour for rendering 05mm thick in CM (1:3) as in ceiling finished even and smooth w/o using extra cement.

M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth complete all as specified

M&L for applying one coat of synthetic enamel paint on old painted steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth and apply putty and primer where requred complete all as specified

M&L for applying two coat of synthetic enamel paint on new wooden surfaces of any description over a coat of pink primer having width/girth exceeding 10 cm complete all as specified including preparation and necessary filling by chalk putty as and where requered to make surface even and smooth.

M&L for applying one coat of synthetic enamel paint on old painted wood surfaces of any description having width/girth exceeding 10 cm complete all as specified including preparation and where requered to make surface even and smooth.

M & L for preparation of old decorated concrete/ plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying two coat of oil bound distemper on old decorated wall surface including necessary filling of wall care putty on uneven surface as and where required.

M L for preparation of new plastered surfaces of walls, & applying two coats of oil bound distemper over two coat of wall care putty of 1 to 2 mm thick and one coat of primer complete all as specified.

M L for preparation of old plastered surfaces of walls, & applying two coats of oil bound distemper over two coat of wall care putty of 1 to 2 mm thick and one coat of primer complete all as specified.

M&L for preparation of old decorative plastered/concreat surface of wall, chajja, facia, face of columns, beam ect by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying one coat of weather proof exterior emulsion (APEX) with necessary scaffoding up to 4th storey, including necessary filling of wall care putty on uneven surface as and where required all as specified.

M & L for preparation of new plastered/concrete surfaces of walls, (up to 4th sorey with necessary scaffolding) and applying two coat of cement based paint over one coat of primer complete all as per specified and directed by Engr-in-charge.

M & L for preparation of old decorated plastered /concrete/ brick surfaces of walls (up to 4th storey with necessary scaffolding) and applying one coat of cement based paint on old decorated surfaces including preparation.

M & L for preparation of old decorated brick /concrete plastered /un-plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime white wash on the walls, pillars, cornices etc. complete all as specified and directed.

M & L for preparation of new wall surface , Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, oil, greasy spots & rubbing with sand paper and and applying one coat of white wash on ceiling.

Material and labour for providing plaster of paris cornices/raised moulding in corner of wall and ceiling raised at site of 12cm wide as per the trade pattern complete all as directed and as approved by GE incl making good the plasered surfaces to the true alignment.

Material and labour for providing plaster of paris raised moulding half round in the border of ceiling of 2cm radius complete all as directed by Engr-in-Charge.

Material and labour for providing plaster of paris ornamental type raised moulding half round in the border of corner ceiling beading as per the sample approved by GE. Note : Radius not less than 30cm.

Material and labour for providing plaster of paris cast in situ ornamental centre/fan floor dia not exceeding 50cm as per the sample and pattern approved by GE complete all as directed.

M/S shakti steel industries

M/S ANIL MAHAJAN

M/s Rajesh Mehra