REPAIR /RENEWAL AND PROVISIONING OF ROAD FURNITURE AT ICGS KAVARATTI AND DUCTING CABLE TRENCH AT INS DWEEPRAKSHAK UNDER GE (NAVY) LAKSHADWEEP

M&L painting lines, dashes, arrows, letters,etc. on roads, pavements and the like exc 10cm wide with white or golden yellow road marking paint of adequate No. of coats to achieve desire result including preparation of new or previously treated surfaces to receve the painting complete all as specified and as directed.

S & F in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

S & F in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as permanufactures instructions complete all as specified and directed.

S & F in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions complete all as specified and directed.

S & F in repair road side safety traffic convex mirror of dia 600mm to 900mm with radius of curvature 500-700mm of thickness 4-6mm ( acrylic) and optical specificats are 120-150 degrees, refl;ective coating of aluminium or silver with reflectyvity 85-95% with and including mounting on 50mm dia SS 316L marine grade pipe of minimum height 1.5 to 2.0m fixing with bracket, clamp and adhesive if any required as per manufactures instructions complete all as specified and directed.

Manufacturing,S&F retro reflective Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of alumiium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and directed.

Excavation post holes (or similar holes) eachin any type of soil, n.exc 0.5cum, getting out in hard / dense soil , returning, filling in and ramming earth or broken rubble mixed with earth around, in layer not exceeding 25cmm watering, and removing surplus soil to a distance n.exc 50m and marking good surface complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed .

M&L PCC 1:4:8 type D2 by by using 40mm graded crushed stone aggregate as in foundations, filling and mass concreting complete all as specified and as directed.

S & F Boom barrier of stainless steel , manual function of high quality with colour of red& white , of 6meter length , operated with rope, spring & buttons and fixed as per manufactures instructions complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and removing debris outside MD land complete all as specified and as directed .

M&L 150mm thick plain cement concrete 1:1.5:3 type A 1 using 20mm graded aggregate as in path / road including use and waste of formwork and levelling the top surface, finished with brooming complete all as specified and as directed.

M & L forming contraction ( dummy) joints 65mm deepX 10mm wide filled with sealing compound grade "A", complete all as specified and as directed.

M&L pre-cast cement concrete block masonry 1:3:6 type C1 (20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed.

Rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L cement concrete 1:2:4 type B0 byusing 12.5 mm graded stone aggregate in coping, kerbs, benching and the like, including weathering slighthy rounded or chamfered angles and throating as directed including necessary form work complete all as specified and as directed

Precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in cover slab for man holes / drainage / septic tank cover , set in cement mortar 1:4 including necessary from work complete all as specified and as directed. Note: Reinforocement shall be measured and paid seperately.

M & L TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending hooking ends, and binding spirally for hooping column hooking ends and binding with and including mild steel wire not less than 0.9 mm dia complete all as specified and as directed.

Returning filling in, with excavated soils including spreading, levelling, watering and well ramming in layers n.exc. 25 cm thick complete all as specified and as directed .

Removing excavated material to a distance n. exc 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and as directed .

Please Enable Macros to View BoQ information