Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
19 Oct 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Lt Col, Vikramjeet Singh Reen
GE I Kanpur Cariappa Road Cantt Kanpur 208004
REPAIR/MAINT OF MOTORIZED ROLLING SHUTTER, BUILDING LIGHTING PROTECTION, EARTHING AND CONNECTED ACCESSORIES IN WAREHOUSES OF COD TECHNICAL AREA UNDER GE (I) KANPUR
2026_MES_791497_1
GE(I)/KAN/T-67 OF 2026-27
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
KANPUR
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE(I) KANPUR
₹80,000
Yes
28 Sept 2026
28 Sept 2026
26 Oct 2026
28 Sept 2026
19 Oct 2026
12 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down complete motorized assembly from shutters and refiitting the same after Repair/replacement of following items complete all as specified and directed:-
(a) Repair/replacement of limit switches.
(b) Repair/replacement of compartment comprises of motor copper winded of suitable size & cap to lift the Shutter ,gear box driving end,braking system.
(c) Repair/replacement of operation switches in SS enclosure box.
NOTE: The contractor must visit the site before quoting the rates. | 20 | Each Job | - | - |
| 2 | S&F for repair/replacement of Bracket of motorized assembly with suitable fastners set complete all as specified and directed. | 15 | Each Job | 2 | ₹30 |
| 3 | S&F for repair/replacement of round pipe shaft for driving and non driving ends with ring sets of motorized assembly complete all as specified and directed. | 15 | Each Job | 3 | ₹45 |
| 4 | S&F for repair/replacement of non driving end side gear box of motorized assembly with wheel & chain complete all as specified and directed. | 14 | Each Job | 4 | ₹56 |
| 5 | S&F steel rolling shutters, without ball bearings 1.00 mm thickness of lath including top cover, anchoring rod, hasp and staple including top cover,anchoring rod,hasp and staple and one shop coat primer, erected in position as indicated including taking down of the same push pull or manual type complete all as specified and directed. | 25 | Sqm | 5 | ₹125 |
| 6 | S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. | 10 | Each | - | - |
| 7 | Taking down if necessary on ground and overhalling rolling shutters push pull or manual type including oiling, greasing including guide chanel and erected in possition after changing of defective part if any with and including two coat of synthetic enemal paint over and including a coat of primer complete all as specified and directed.
(Note- Deffective parts shall be measured separately and fixing of those items inclusive in qoted rates. | 30 | Each Job | 2 | ₹60 |
| 8 | Supply only Ball bearing for rolling shutters complete all as specified and directed. | 15 | Each | 4 | ₹60 |
| 9 | Supply only 1 mm thick hood cover of PGI steel sheet with necessary fixing arrangement for motorized rolling shutters including welding work and frame work wherever necessary for cover end to end width wise from one end to another end (motor end) complete all as specified and directed.
Note:- Cost of welding waste etc shall be deemed to included in quoted rate. | 10 | Each job | 5 | ₹50 |
| 10 | Supply only lock rail including sliding locking arrangement with welding as required for motorized rolling shutters complete all as specified and directed. | 22 | Each Job | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.24 MB
TenderdocumentsT67.pdf
Tender Documents • 0.98 MB
BOQ_887361.xls
BOQ • 2.10 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .