Certain repair to BR wks at OTM Accn of unit 1, 2, 3 and 2 ASD 23 FAD area and repair to kitchen, bathroom, toilet, joinery, floor, roof, plumbing, sanitary fittings, cupboard and misc work in Offrs, JCOs and Ors Md Accn at Mil Stn Beas under GE Kpt

Amount

Demolition floor, hearth or wall tiling or stone slabs, laid, beded & pointed in any mortar including removing rubbish off the premises complete all as specified & as directed.

Demolition of cement concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete including removal of debries to a distance exc.250 m and n.exc. 500m and depositing where directed complete all as specified & directed.

Demolition of cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of un-reinforced cement concrete of any description and in any position not otherwise specifically provided for and removing debries from site of work complete all as directed by the Engineer-in-Charge.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as directed.

Material and labour for brick work built in cement mortar (1:6) with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 m to mean radius complete all as specified and as directed by the Engineer-in-Charge.

Material & Labour for PCC type B-0 (1:2:4) (using 12.5mm graded crushed stone aggregate) as in parapets walls, benching, coping and filling at junction of brickwork and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete including use of forwork (straight or curved) all as specified and directed.

M & L for RCC 1:11/2:3 (Design Mix), type A-0, using 12.5 mm nominal size graded crushed stone aggregate as in chajjas, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including 5mm thick rendering in CM 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

Dismantling of brick tiles or terracing tiles laid bedded and pointed in cement mortar in single layer on roofs complete all as specified and as directed by the Engineer-in-Charge.

Demolation of mud in roof any thickness including plastering and leeping plaste(whether ful thickness removed or part thereof) complete all as specified and as directed by the Engineer-in-Charge.

Taking up or down, steel tubing 15mm bore and connections including cleaning for refixing and removal from site complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 15mm bore galvanized steel water tubing, medium grade with all fittings fixed to wall, ceiling or laid in floors complete all as specified and directed by the Engineer-in-Charge.

Taking up or down, steel tubing 20mm bore and connections including cleaning for refixing and removal from site complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 20mm bore galvanized steel water tubing, medium grade with all fittings fixed to wall, ceiling or laid in floorscomplete all as specified and directed by the Engineer-in-Charge.

Material & Labour for 75mm thick plain cement concrete (1:4:8), type D-2, (using 40mm graded stone aggregates) as in sub base of floor complete all as specified and as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm girth but not exc 20 cm Girth complete all as specified and as directed by Engineer-in-Charge.

Material and labour for joint free coloured glazed ceramic tiles of size 350x250x7mm/450x350x7mm thick, as on vertical surfaces such as dados, skirtings etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match colour of tiles over and including backing coat 10mm thick cement mortar (1:4) complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for joint free non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, over and including 15mm thick screed bed in CM 1:6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge.

Material and labour for 10mm thick (square / rectangular) vitrified light shade, coloured tiles, area of each tile not exceeding 0.36Sqm as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match with colour of the tiles over and including screed bed of 15mm thick cement mortar (1:6) complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for 20-25mm thick machine cut kota stone slab flooring as in flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and granite polishing complete all as specified and directed by Engr-in-Charge.

S&F in repair Stainless steel wire cloth, 0.63mm nominal dia of wire & average width of aperture 1.40mm & fixed with stainless steel wire staples complete all as specified & directed.

S&F Brass chromium plated single towel rail 20mm dia, D type, 600mm long between flanges as per cat part No AKP-35711P of Jaquar fixed with and including chromium plated brass screws and wooden/plastic cleats, fixed in repair complete all as specified & as directed.

Supply and fix in repairs Chromium Plated long body Bib taps, cast copper alloy with crutch or butterfly handle with wall flange with aerator, screwed down, screwed for iron pipe or for brass ferrule and fixed of 15mm bore (Cat Pt No MQT 512, Essco Marvel series or equivalent) complete all as specified and as directed.

Supply and fix in repairs; 15mm bore PVC connection and 45cm long with two Nos of brass check nuts and washers complete all as specified and directed by the Engineer-in-Charge.

S&F Brass chromium plated angular basin inlet connection (Angle Valve) quarter turn, with wall flange fancy type cast copper alloy 15mm bore as per cat part No MQT-526 of Model Essco, Marvel series complete all as specified & as directed.

Supply and fix in repair; Vitreous China Wash Basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or eracting stand & waste pipe, coupling etc complete all as specified and directed by Engineer - in – Charge.

S&Fin repair vitreous china wash down water closet, "Orissa pattern, size, 580x440mm white, with integral foot rest (excluding flushing cistern and flush pipe) but including provision of cement concrete bedding complete fixed in repairs all as specified & directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and as directed.

S&F, brass CP central hole, cast copper alloy (ISI Marked) fancy type chromium plated for mixing hot and cold water screwed down high pressure with capstan head screwed both ends basin mixer with copper pipe complete all as specified and as directed by Engr-in-Charge.

S&F in repair 3 in 1 wall mixer telephonic type chromium plated with CP wall flange complete all as specified & as directed by Engr-in-Charge. (Cat part No MQT-517B Marvel series or equivalent of Jaquar)

Supply and fix in repair; 15mm bore pillar taps, cast copper alloy with capstan heads chromium plated, fancy type, screwed down high pressure with or without lettered Hot or Cold with long screwed shank and fly nuts, complete all as specified and directed by the Engineer-in-Charge.

Supply and fix 15mm bore bib tap with wall flange, cast copper alloy, chromium plated and screwed to iron pipes or union fittings complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in Stop valves, cast copper alloy, bore dia of pipe in 15mm, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe and fixed but fancy type, Chromium Plated with long shank and cup (concealed type) etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair 15mm bore chromium plated two way stop valves cast copper alloy screwed down high pressure with with crutch or but-terfly handle, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply and fix in repairs shower rose of chromium plated with shower arm 195mm long with bend of 45 degree 15mm dia complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair chromium plated, Brass, Jet spray including flexible pipe 15mm bore, screwed down, high pressure pipe of 15mm bore with wall flange fixed to wash down water closet (pedestal pattern) complete all as specified and as directed by Engineer-in-Charge.

Disconnecting existing tanks, setting aside (or lowering if required) and cleaning and removing all scales and dust from PVC water tank manually and cleaning, scraping inner surfaces of tank by means of brush and then washing with clear water and cleaning of mouths of circulating pipes of capacity of tank exceeding 250 litre but not exceeding 500 litre including writing date of cleaned outer body of the tank with 100mm high by synthetic enamel paint (white/black colour) and reconnecting and refixing in position complete all as specified and directed.

Supply and fix acrylic toilet cabinet with shelves 425mmx350mm, 100mm size with shutter complete all as specified and as directed by Engineer-in-Charge.

Supply and fix steel plate rack made of stainless steel 1mm thick over all size 600mmx750mm complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Stop valves, cast copper alloy, bore dia of pipe in 15mm, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe and fixed but fancy type, Chromium Plated with long shank and cup (concealed type) etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 15mm bore chromium plated stop valves/angular valve, cast copper alloy, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for iron pipe and fixed complete all as specified and directed. (Cat part No -QQT-7053 of Make: Jaquar).

S&F Vitreous China Ware Wash hand basin white, flat back, size 210x580x460mm size with long padestal, 32mm dia stainless steel waste coupling of Make Jaquar (Cat Pt No ALD-705L130) & Ci Brackets including cutting for and pinning ends of brackets or erecting stand complete. Make Jaquar solo Cat Pt No (SLS WHT)0572+1510 complete fixed in repairs all as specified & directed.

S&Fin repair vitreous china wash down water closet, "Orissa pattern, size, 680x470mm white, with integral foot rest (excluding flushing cistern and flush pipe) but including provision of cement concrete bedding complete all as specified & directed.

S&F coloured Toilet paper holder CP fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. (Cat Part No CAN-1153N Make Jaquar)

Supply and fix in repair, 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed by the Engineer-in-Charge. .

Supply only liquid water proofing compound complete all as specified and as directed by Engineer-in-Charge.

S&F, Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish and Wall Hook with N.R.V (Back Flow Preventer) with clamp (Cat Part No. ALD-CHR-563 of Marc or equivalent of Jaquar)

S&F, soap dish, stainless steel approximate size 160x160x90mm fixed to wall with chromium plated brass screws fixed in repair complete all as specified & as directed

Suppy & fix in repair coat hooks of 6 numbers aluminium powser coated mounted mouned on aluminium powder coated plate 50x300mm fixed to wall with chromium plated brass screws complete all as specified & as directed by Engr-in-Charge.

S&F, sheet glass shelf (450mm long) assembly consisting of 8mm thick sheet glass shelf 15 cm wide with chromium plated bracket guard and railing fixed in repair complete all as specified and directed.

S&F, corner glass shelf (300mm long) assembly consisting of 8mm thick sheet glass shelf with chromium plated bracket guard and railing fixed in repair complete all as specified and directed.

S & F, 25mm dia steel curtain rod, powder coated having wall thickness 1mm with aluminium powder coated brackets , stops, rollers, curtain rings etc complete fixed in repair all as specified and directed by Engr-in-Charge.

S&F, PVC (SWR) pipe, 110mm dia pipe, single socketed in any length with rubber ring joints, laid in trenches/fixed with wall or in floors etc including taking down existing pipe complete all as specified and as directed.

S&F in repair, PVC (SWR) bends 110mm bore complete all as specified & directed.

Supply and fix 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane including hacking out old broken glass complete all as specified and directed by Engineer - in – Charge.

Supply and fix 3 mm thick frosted sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane including hacking out old broken glass complete all as specified and directed by Engineer - in – Charge.

S&F,aluminium (extrutded section) door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed in repair complete all as specified and directed.

Taking down Chowkat or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) and removing from site complete all as specified and as directed by the Engineer-in-Charge. by the Engineer-in-Charge. by EIC.

Taking down Chowkat or frames exceeding 1.5 Sqm but not exc 4 Sqm each with shutters (without taking off shutters from the frames) and removing from site complete all as specified and as directed by the Engineer-in-Charge. by the Engineer-in-Charge. by EIC.

Taking down shutters of any description n.exc 1 Sqm each and refixing in same opening complete all as specified and as directed by Engineer-in-Charge.

Taking down shutters of any description exc 1 Sqm and n.exc. 2 Sqm each and refixing in same opening complete all as specified and as directed by Engineer-in-Charge.

S&F Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs hinges, lock strike plate, hinges etc complete, size of frame 125x60mm including tarring ends and back of chowkats and lugs including back filling of PCC 1:3:6 for chowkats & PCC 1:2:4 for block for hold fast including two coats of synthetic enamel paint over a coat or red oxide primer on exposed surfaces all as specified and directed.

S&F Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs hinges, lock strike plate, hinges etc complete, size of frame 105x60mm including tarring ends and back of chowkats and lugs including back filling of PCC 1:3:6 for chowkats & PCC 1:2:4 for block for hold fast including two coats of synthetic enamel paint over a coat or red oxide primer on exposed surfaces all as specified and directed.

Supply and fix 35mm thick second class hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer - in – Charge.

Supply and fix 35mm thick second class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8 complete all as specified and directed by Engineer - in – Charge.

S&F, Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified in SSR 2010, Part-II and as directed by Engineer-in-Charge.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of tube for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top, lock and bottom railson either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in MS frames welded/sealed to the styles and rail with suitable PVC sheet /sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified.

Supply and fix factory made solid PVC Moulded Door shutter (with full particle board core 30mm thick), with 2, 4 or 6 raised panel design with 5mm thick Moulded Prelam PVC sheet on the front face & 2mm other side complete all as specified & directed by Engr-in-Charge.

Supply and fix Steel Window 1.25mm thick Box Type (primer coated) ERW hollow P section of size 60mm x 25mm, 1.25 thick sheet single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:2:4) type B-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Hold Fast, 150mm long of 12mm square bar made to shape – 04 Nos per window (b) Handles of Z Sec 100mm long (c) Stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges – 01 No per leaf (e) MS Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Fabrication & fixing arrangement as per drg No. CEJZ/TD-7/07 sheet 1/3 of 3/3. Note : Glass and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed by Engineer - in – Charge.

Supply and fix Steel Window 1.25mm thick Box Type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note: Wire mesh and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed by Engineer - in – Charge.

Supply and fixing framed work such as griils, grating etc., with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, laders, framed balusters, walk ways, railings frame work of water tanks and similar work conforming to Fe-290. Gde E-165 complete all as specified & as directed.

S & F, 200 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed complete all as specified and as directed.

S & F, 150 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed complete all as specified and as directed.

S&F, 100mm size butt hinges, medium weight, cold rolled mild steel & fixed complete all as specified & as directed.

S&F, 150mm size aluminium handles, cast type, anodized and fixed complete all as specified & as directed.

S&F, 300mm length of bolt, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified & as directed.

S&F, floor door stopper of overall length of cover plate 140mm aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Supply and fix in repair 15mm bore bib tap chromium plated long body bib taps, cast copper alloy with crutch or butterfly handle with wall flange with aerator, screwed down, screwed for iron pipe or for brass ferrule and fixed to iron pipes or union fittings complete all as specified and as directed by Engineer-in-Charge.

Supply and fix MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engineer-in-Charge.

Supply and fix galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples, wodden beads to steel windows/wodden doors complete all as specified and directed by Engineer - in – Charge.

Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water built in cement mortar., complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for rendering 15mm thick cement plaster in cement mortar (1:4) on any of brick work or concrete surfaces of walls finished fair and even without using extra cement complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for rendering 15mm thick cement plaster in cement mortar (1:6) on any of brick work or concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.

M & L for preparation of new plastered surfaces of walls etc. and applying two coats of distemper oil emulsion over and including 3mm thick wall care putty preparatory to distemper complete all as specified & directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Material & Labour for preparation of new or old wooden or wood based surfaces of any description and girth, not otherwise described and applying/treating with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and evenly applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply & Fixing in repair 10 Litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets and connection to pipes complete all as specified & directed

S&F in repair SDG Frameless Beveled Mirror for Bathrooms Wall and Home, 18x24 Inch (Silver) and 5mm thick looking mirror, Beveled Edge at 0.75 Inch Edge thickness 4mm, fitted to wooden plug with CP screws. Complete all as specified and as directed by Engr-in-charge. Make. Saint Gobain/Modi Guard Ultra Mirror.

Disconnecting existing PVC water tanks, of 500 & 1000 Litre capacity setting aside (or lowering if required) and cleaning and removing all scales and dust from PVC water tank manually and cleaning, scraping inner surfaces of tank by means of brush and then washing with clear water and cleaning of mouths of circulating pipes of capacity of tank exceeding 250 litre but not exceeding 500 litre including writing date of cleaned outer body of the tank with 100mm high by synthetic enamel paint (white/black colour) and reconnecting and refixing in position complete all as specified and directed.

Supply, hoisting and fixing in position Rotational moulded Polyethylene water storage tank, 500 litres capacity conforming to IS-12701 (1989) cylindrical vertical type two-layered wall construction with closed top including inlet, outlet and wash out holes of approved make including taking down the old unserviceable water storage tank complete all as specified and directed. (Make : Sintex)

Supply, hoisting and fixing in position Rotational moulded Polyethylene water storage tank,1000 litres capacity conforming to IS-12701 (1989) cylindrical vertical type two-layered wall construction with closed top including inlet, outlet and wash out holes of approved make including taking down the old unserviceable water storage tank complete all as specified and directed. (Make : Sintex)

Supply & Fixing 20mm dia Ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210gms) complete all as specified and directed. (Make : Prayag)

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete complete all as specified and as directed.

Material and labour for formwork to sides and soffits of beams chajjas and the like for rough finished surfaces of concrete complete all as specified and directed by Engineer - in – Charge.

Demolition and breaking up 100/75mm internal dia (sand cast) , Cast iron pipes jointed in cement mortar complete all as specified and as directed.

Supply and fix 75 mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors/fixed to walls complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 100mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors/fixed to walls complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 100 mm dia CI Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 75mm dia CI Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 100 Cast Iron bends (any radius) ducks foot rest or heal rest complete all as specified and as directed by Engineer-in-Charge.

Supply and fix CI branch pieces single ordinary or inverted fitted with oval access door of size 100mm complete all as specified and as directed by Engineer-in-Charge.

Supply and fix CI branch pieces single ordinary or inverted fitted with oval access door of size 75mm complete all as specified and as directed by Engineer-in-Charge.

S&F, 32mm waste coupling of PTMT (half or full threaded) (minimum weight 40mm-60 gms) with PVC waste pipe for wash hand basin fixed in repair complete all as specified and as directed.

S&F, 40mm waste coupling of PTMT (half or full threaded) (minimum weight 40mm-60 gms) for sink fixed in repair complete all as specified and as directed.

Grubbing up bushes or trees trunk of girth n.exc 10cm, including cutting of tree/bush grown in/over walls, roofs, anywhere in buildings, digging out roots including trunk protruding over ground, filling holes, and levelling off ground and making good the disturbed portion of wall with plain cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate including matching the existing finishes and removal of tree/bushes from the site,including cutting out natural vegetation plants with grown up wall or in roof and making good the damaged portion to match with the existing ; including removing of serviceable materials to a distance n. exc 50m and clearing site complete all as specified and as directed by the Engineer-in-Charge.

M&L for rendering 10mm thick plaster in cement mortar 1:4 on brick work or concrete surfaces including mixing with water proofing compound and finishing of surfaces even and smooth without using extra cement complete all as specified & directed. Note : WPC shall be measured and paid for separately.

Material and labour for plain cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in roof kerbs, padding, sunken portion etc including finishing cement concrete surfaces even and fair complete all as specified and as directed.

M&L for Preparation of new concrete surface and apply water proofing treatment to roof with APP (Atactic poly propylene) modified prefabricated five layer 3mm thick water proofing membrance super therolay of STP limited with non-woven polyster male reinforcement of 160gms, weight of membrane @3.6kg/sqm over a solvent based bitumen primer shalitex primer @ 0.3lt/sqm by the same manufacturer conforming to IS-3384-1986. Note : The membrane shall be laid using butane torch. The end lap should be 100mm and the side lap must be minimum 75mm. The membrane shall be first laid upto the parapet wall junction and then shall be overlapped with naother membrance (flashing) with and overlap covering upto a distance of 300mm in case of parapet height is less than/upto 500mm membrane shall be terminated at the top of parapet.

Material and labour for 50mm thick plain cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) as in flooring, hard standing and plinth protection complete all as specified and directed by Engineer-in-Charge.

S&F,aluminium (dia cast body) door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed in repair complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep, including for inserting TMT bar as required length and shaping horizonatal/vertical face of groove making good where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 10mm dia mild steel TMT bars as in reinforcement, cut to length, bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia or occuring with clips complete all as specified and as directed by Engineer-in-Charge.

S&F Cast Iron floor trap 75mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 (including cutting in existing floor,removing the old and place the new pieces and making good the disturbed portion) complete all as specified and directed.

S&F Cast Iron floor trap 100mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 (including cutting in existing floor,removing the old and place the new pieces and making good the disturbed portion) complete all as specified and directed.

M&L for rendering 5mm thick plaster in cement mortar (1:3) on ceiling including finishing even and smooth without using extra cement complete all as specified & directed.

M & L for preparation of new plastered ceiling surfaces and applying two coats of distemper oil emulsion over one coat of birla putty 1mm thick preparatory to distempering complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any guage, thickness including Nanital or similar pattern roof coverings complete all as specified and as directed.

Dismantling cast iron work of any description complete all as specified and directed.

S&F, Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheeting, 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws as specified and directed.

S&F, Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge, etc. fixed with self tapping screws complete all as specified & directed.

Dismantling of Asbestos Cement (corrugated, semi corrugated etc) sheets in roof coverings or similar pattern roof coverings complete all as specified and directed.

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roof, walls etc Fixed with L-type or J-type or cranked hook bolts etc complete all as specified and directed.

M&L asbestos cement, two piece adjustable plain wing ridge 6mm thick sheets fixed with L-type or J-type or cranked hook bolts etc complete all as specified & directed.

S&F for 18mm thick high grade PVC boards fixed with screws to timber/steel frame work complete all as specified & directed.

S&F in repairs Stainless Steel Soap Dispensers with bracket complete all as specified by Engineer-in-Charge.

Demolition of wall and celling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified & directed.

Supply and fix in repair 6mm thick PVC hollow wall paneling plain/coloured/printed fixed with screws to wall and corner, edges of panels be sealed with approrite arrangement, colour and pattern as approved by Engineer-in-Charge. Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Armstrong make ceiling using 9mm thick gypsum based ceiling tiles with wheather resistance face on back side and vinyl finish on the front fixed in 24mm GI armstrong frame work of grid 600x600 mm size, the members of snap grid frame work of GI/Steel section of 24mm wide with T-flanges, channels etc of white colour having rotary stiching on all members, i.e main runner, 1200x600mm cross tee galvanised with minimum thickness of 120 gms per/sqm passed through 500 hrs test and hanging the same with existing roof members such as rafters, pulins or other wooden members particularly provided for hanging pupose using 8mm dia mild steel bar of required length fixed with nut bolt of 50mm long and 10mm dia of neck with washer flat iron 50x6mm thick clamps etc to wooden members complete all as specified and directed.(Note:- An additional steel members required for hanging of ceiling shall be measured under relevent item here-in-after and paid separately).

S&F in repair Coupled Closet WC colour, Bowl for Coupled WC with UF soft close slim seat cover, Hinges, Fixing Accessories and Accessories Set. Size 380x660x765mm (CAT Part No LYS-WHT-38751S250UFSM) and Cistern with cistern fittings (CAT Part No: LYS-WHT-38201) of Make Jaquar (Product Code LYS-WHT-38751S250UFSM + LYS-WHT-38201) complete all as specified and as directed by Engineer-in-Charge.

S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe (min weight 60gms) complete all as specified and as directed.

S&F vitreous china urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) with grating and union for dischage pipe complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing flush pipe grating and union for discharge pipe complete fixed in repairs complete all as specified and as directed.

S&F vitreous china urinal partition white of size 310x700mm fixed in repair complete all as specified and as directed.

S&F in repairs Handy Folding Stainless steel Towel Rack-24 Inches with chromium plated bracket complete all as specified by Engineer-in-Charge.

Material & labour for 100mm thick plain cement concrete (1:4:8), type D-2, (using 40mm graded stone aggregates) as in sub base of floor complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Material & Labour for Machine pressed precast concrete interlocking paver block, 60mm thick, any shape and size, confirming to IS-15658-2006, M-35 Grade, with grey cement and no pigment complete all as specified and directed. Make:Supertile.

M&L Plain Cement Concrete Type C-1, 1:2:4 (using 20mm graded granite stone aggregate) parapets wall copings, including use and waste of form work complete all as specified and as directed by Engineer-in-Charge.

S&F Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated thickness of lath is 1.25mm but gear operated type with bevel gear box and crank handle all as specified and directed by Engineer-in-Charge.

S&F Powder coated Anodised aluminium frame (Thickness of powder coating not less than 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified.

S&F Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinge type B-21 100mm long (2 Nos) suitable handle (1 No.) complete all as specified and directed.

S&F magnetic type catch fixed with screws to door frame complete all as specified and directed by Engineer-in-Charge.

M&L HD Digital Glossy finish wall tiles coloured of size 300x600x10mm thick , jointing in neat cement slurry and pointing in colour cement to match including 10mm thick plaster in cm 1:4 complete all as spd and directed.MAKE: Kajaria(Cristina Bianca), Nitco(Giza Beige Lt G*), H&R Johnson(Tribeca white)

S&F in repairs Towel ring Code No AEC-1121 ( Make Jaquar)

S&F in repairs Towel rack Code No AEC-1181 ( Make Jaquar)

S&F in repair 25mm dia Ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms/20mm-210gms/25mm-455gms/40mm-690gms) (Make : Prayag/Pplytuff).

S&F in repairs Bib tap fancy type of PTMT any colour high pressure screwed for 15mm bore iron pipe and fixed (Minimum weight 15mm-105gms) Make : Prayag/Polytuff).

S&F in repairs Bib tap fancy type with long body of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-120gms) Make : Prayag/Polytuff).

S&F in repairs Pillar taps fancy type of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-120gms) Make : Prayag/Polytuff).

S&F in repairs 15mm Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm-92gms) Make : Prayag/Polytuff).

S&F in repairs 15mm Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) Make : Prayag/Polytuff).

M&L for preparation of the surface edge by necessary rendering with Polymer Mortar (Expansion/Contraction/ Sliding joints) for POLYSULPHIDE SEALANT WORK, removing all dust dirt etc from the expansion joint and cleaning the surface thoroughly, insertion of Backing material like Polystyrene Back up rod or Board/Thermocol, application of two coats of Sealant Primer on the concrete surface of the joint to be treated, filling the joint by Polysulphide Sealant Hind Sealant PS (Pour grade for horizontal joint & Gun grade for vertical joint) and tooling the same also provided 5mm thick MS plate as per manufacturer instruction complete all as specified and directed by the Engineer-in-Charge.

M&L for Scrapping and cleaning the Roof Terrace surface thoroughly from dust, dirt cement slurry etc by means of wire brush, chisels scrappers, water etc and Provision of protective overlay of average 40mm thick Screed concrete of proportion (1cement:2 Sand:4 Stone chips) over the entire chemically treated surface maintaining a slope towards the rain water outlet and Painting with acrylic polymer based water impervious slurry coating Hind Crete Plus WPM in two (2) coats with Glass fiber woven mesh reinforcement as per manufacturer instruction complete all as specified and directed by the Engineer-in-Charge.

DUGGAL CONSTRUCTION CO

COSMO BUILDERS