E-tender/Eng/EQ-315/24-25 (2nd call)

Amount

Distribution point wiring with 2x1sq.mm PVC insulated FR/HRFR 1100Vgrade (Havells/Finolex/ ISI make) single core copper conductor conforms to IS:694 in 20mm size PVC rigid conduit pipe (Prestoplast/Precision/ ISI make) with all accessories as required to light/fan/call bell points with modular type switch (Brand approved by EIC) fixed on Modular GI /PVC switch board with top cover plate on wall with all necessary connections including mending good damages to original finish.

Supplying only fluorescent light fittings type SP095V LED40S, 4000K, coollight, Smart Bright Linear, Philips make or equivalent.

Supply & Fixing 240V, 3 nos. 6A & 1no. 16A multi pin modular type plug socket with 3nos. 6A & 1no. 16A modular type switch (Brand approved by EIC), 16A Modular switch type MCB (C-Curve)/fuse and Indicator without plug top on 2 row 18 module GI modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necessary connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240V, 6A, 5pin Modular type plug socket without plug top & 6A Modular type switch (Brand approved by EIC), on existing surface mounting Modular type switch board with top cover plate and making necessary connections with PVC Cu wire and earth continuity wire etc. all complete.

Supplying new 230V, 50Hz, 1200mm sweep antidust, decorative ceiling fan, model-Aura Prince, Crompton Greaves make or equivalent.

Supplying and fixing double-door SPN MCB Distribution Board (2+10) way Seimens/ISI make with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.

Supplying and fixing 240/415 V MCB Isolator 40A, DP, Siemens/ISI make on din rail of existing DBs and necessary connection.

Supplying and fixing 240/415 V, 6-32A, SP, MCB Seimens/ISI make of breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.

Supplying 2x2.5sqmm & 1x1.5sqmm PVC FR/HRFR 1100V grade stranded single core copper conductor conforms to IS:694(Havells/Finolex/ISI make) in PVC rigid conduit/casing & capping Prestoplast/ Precision/ISI make) with all accessories as required & embedded on wall/surface along with necessary connections.

Supplying & fixing 6-32A, SP MCB, Mini Modular, C series, Cabtree/Anchor/ISI make on existing switchboards & necessary connections.

Fixing only single/twin fluorescent light fitting complete with all accessories as required directly on wall/ceiling/HW block or on existing down rods and suitable size of MS fastner etc. as required.

Supplying & fixing iron beam fan clamp of two piece type, as per approved specification, fabricated from 40 mm x 9 mm MS sheet flat suitable for beam having flange upto 150 mm wide& also for the fluorescent light fittings by GI clamp.

Fixing only fluorescent light fitting suspended 183 cm bellow the ceiling with 2 No. staywire 7/12 SWG GI (Hot Dip) stranded Wire (45 Ton quality) incl. S & F GI thimble and making off binding at both end/chain supports incl. S&F nut, bolt, etc, ceiling plate and connecting the length of PVC insulated copper wire and painting etc. as required.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod up to 30 cm incl. painting the rod with approved paint and making necessary connection as required by flexible copper wire.

Labour charges for dismantling the existing wirings, fitting & accessories& depositing the same to the authority. (As per Labour Commissioner Circular dated 28.07.2023)

KUNDU ELECTRICALS (BID ID -6307040)

MANNA ELECTRONICS AND ELECTRICAL WORKS (BID ID -6313359)

SANJAY ELECTRICALS (BID ID -6315223)