RequiredOEM Authorization Certificate Bid to RA enabled No Executive Computer Table ( 6 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Type of Computer Table Computer cum Printer table with key board pullout tray and table top * Mode of Supply Knocked Down To Be Assembled At Consignee Site By The Seller * Construction of Computer/Printer Table Gable end and modesty panel * 1/6 Frame type Free standing * MISC Table top long sides To be post form half round profile with corner edge bending * Table top plain sides Edge to be banded with PVC tape of 2mm thick with the help of hot melt glue * Gable end modesty panel plain sides Edge to be banded with PVC tape of 2mm thick with the help of hot melt glue * Number of buffers provided 4-Nos. at bottom * Wheels provided NO * FINISHING AND PACKING Packing Bubble Sheet * Colour of Top - * MATERIAL Material of table top
Requiredkeyboard and drawer Three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest MDF board of grade SBG II of IS 12406/Latest
RequiredThree layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest Bottom side of top should have balancing sheet of requisite thickness of same colour as top laminate * Gable end and Modesty panel material Three Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Latest Flat single layer prelaminated MDF board conforming to having designation PLMDF-23 of IS 14587/Latest
RequiredThree Layer prelaminated particles board(wood product) of grade II type III of IS 12823/Latest
RequiredCommercial Block Board BWP grade Conforming to IS 1659
RequiredDecorative Block Board BWP grade Conforming to IS 1659
RequiredCommercial Block Board MR Grade Conforming to IS 1659
RequiredDecorative Block Board MR Grade Conforming to IS 1659
RequiredTeak wood
RequiredCarved teak wood
Required2/6 Other wood Leg Material NO LEGS NO LEGS DIMENSION Table top thickness ±2mm 25 * Thickness of gable end and modesty panel ±2mm 15 * Dimension of leg(mmXmm) ±5mm No legs * Length of table in mm (±15 mm) 1525 1220.0
Required1525.0
Required1525 Depth of table in mm (±10mm) 760 460
Required610
Required760
Required915
Required1065
Required1220
Required1370
Required1525
Required1675
Required1830 Height of table in mm (±10mm) 760 610
Required685
Required760
Required840
Required915
Required990 Width of outside drawer on top right side of the table with ball bearing (±5mm) 400 * Depth of outside drawer±5mm 430 * Height of outside drawer±5mm 200 * KEYBOARD TRAY Type of keyboard tray Wooden keyboard tray Metal keyboard tray
RequiredPlastic PVC keyboard tray
RequiredStainless steel keyboard tray
RequiredWooden keyboard tray
RequiredTeak wood keyboard tray
RequiredMDF board keyboard tray
RequiredPrelaminated particle board keyboard tray
RequiredCommercial board keyboard tray Material of keyboard tray and Right angle L- type supporting bracket Three layer prelaminated particles board(wood product) of grade II type II of IS 12823/Latest * Keyboard adjustablity underdesk keyboard arm * fixing of supporting bracket With telescopic * Length of telescopic channel ±l0mm N.A * Average weight of telescopic channel ±50Gms N.A * 3/6 Keyboard front width±10mm 600mm * Keyboard depth±10mm 300mm * Keyboard height±10mm 100mm * Finish of exposed edges of keyboard tray To be banded with 0.5-1.0mm thick PVC tape with the help of hot melt glue * Material thickness of keyboard tray ±1mm 12mm * FOOTREST Material of footrest No footrest Flat single layer prelaminated MDF board conforming to having designation PLMDF-22 of IS 14587/Latest
RequiredThree layer prelaminated particles board(wood product)conforming to grade II type III of IS 12823/Latest
RequiredTeak wood
RequiredOther wood
RequiredCommercial Block Board BWP grade Conforming to IS 1659
RequiredDecorative Block Board BWP grade Conforming to IS 1659
RequiredCommercial Block Board MR Grade Conforming to IS 1659
RequiredDecorative Block Board MR Grade Conforming to IS 1659
RequiredNo footrest Length of footrest ±10mm N.A * Depth of footrest ±10mm N.A * Height of footrest ±10mm N.A * Finish of exposed edges N.A * Material thickness of footrest ±2mm No footrest 5mm
Required9mm
Required12mm
Required15mm
Required19mm
Required25mm
Required38mm
RequiredNo footrest WARRANTY Warrantee period in number of years 1 1
Required2
Required3
Required4
Required5 Or higher CERTIFICATION Test reports to be furnished to buyer on demand YES * 4/6 Product having BIFMA certification YES YES OEM of offered product is ISO 9001:2015 certified YES YES OEM of offered product is ISO 14001:2015 certified YES YES OEM of offered product is ISO 18001:2007 certified YES YES * Bold specifications are the golden parameters.
