PROVN OF POP ROOM ALONG WITH SANITARY AREA FOR ORTHOPEDIC WARD AND PROCEDURE ROOM WAITING ROOM WITH SANITARY AREA FOR NEUROLOGY CENTRE AND SPL REPAIR TO BER GEYSER EXHAUST FAN CEILING FAN WITH CONNECTED WIRING INFRASTRUCTURE AT DIFFERENT WARDS AND

Amount

Surface excavation not exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M in depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 M in depth and getting out in soft/ loose soil complete all as specified and as directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/ loose soil complete all as specified and as directed.

M&L for cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations filling, sub base and mass concrete filling, etc complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 M mean radius, using old sise bricks built in cement mortar 1:6 complete all as specified and as directed.

M & L for brick work with sub class ‘B’ old sized bricks straight or curved on plan to any radius as in half brick thick wall built in cement mortar 1:4 complete all as specified and as directed.

M&L for plastering 15 mm thick in cement mortar 1:4 on fair faces of brick or concrete surfaces, finished the surface even and fair with using WPC @ 2% by weight of cement complete all as specified and as directed. (Note- WPC shall be measured and paid separately).

M&L for 15mm thick cement plaster on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even andfair complete all as specified and as directed.

M&L for 10 mm thick cement plaster on Ceiling surfaces in cement mortar 1:3 finished even and fair complete all as specified and as directed.

M&L for mild steel TMT bars, 10 mm dia and over, as in reinforcement, cut to length, bent in shape required including cranking, bending, spirally hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and as directed.

All as per item No 10.00 here-in-before but mild steel tmt bar 6mm to 8 mm dia complete all as specified and as directed.

M&L RCC M-25 using 20 mm graded stone aggregate as in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slab, under reamed piles and mass concrete complete all as specified and as directed.

M&L RCC M-25 using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L RCC M-25 Using 20 mm stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M&L RCC M-25 Using 20 mm stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc complete all as specified and as directed.

Use and waste of formwork to sides of concrete foundations, plinth beams, footings, base of columns, pile caps and similar work for rough finished surfaces vertical or to batter, complete all as specified and as directed.

Use and waste of formwork to sides of concrete pillars, post, struts, piers, columns and similar work, square, rectangular or polygonal rough finished complete all as specified and as directed.

Use & waste Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, Chhajja, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed.

Use & waste Formwork to soffits of suspended slabs such as roof slabs, flat, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) fair finished complete all as specified and as directed.

Use & waste formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregates as in sub base of floors, finished the surface even and rough complete all as specified and as directed.

M & L Machine cut kota stone slab flooring 20-25mm thick over 20 mm thick screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including, Grinding,rubbing and polishing complete all as specified and directed.

M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick cement plaster in cement mortar 1:4 and finished the surface of plaster rough complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 300x600x8mm thick on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tile over 10mm thick cement plaster in cement mortar 1:4 and finished the surface of plaster rough complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection laid in bays not exc 1.5m with expansion joints 30x10mm filled with mixture of hot bitumen and sand, finished the surface even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound (ISI marked) complete all as specified and as directed.

M & L for preparation of new plaster surfaces and applying two coat distemper oil emulsion over 3 mm thick wall care putty on walls as levelling course complete all as specified and as directed.

M & L for preparation of new plaster surfaces applying two coats of weather proof paint epex altima over 3 mm wall care putty complete all as specified and as directed.

M & L for preparation of new ceiling plaster surfaces applying two coat coat of oil bound distemper complete all as specified and as directed.

S&F1000 litres capacity rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including one 20mm ball brass valve with polythene float and fly nut complete all as specified and as directed.

S&F stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handles, screwed both ends for iron pipe 20 mm dia, fixed complete all as specified and as directed.

S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors complete all as specified and as directed.

All as per item No 32.00 here-in-before but 20mm dia complete all as specified and as directed.

Supplying and laying of 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and as directed.

Supplying and laying of 25 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and as directed.

S&F 20 mm bore Brass Elbow for fixing of CPVC pipe complete all as specified and as directed.

S&F Brass Elbow (3/4 X ½) mm for fixing of CPVC pipe complete all as specified and as directed.

S&F 20 mm Brass Tee for fixing of CPVC pipe complete all as specified and as directed.

S&F 20 mm Male Brass Threaded Adaptor (MTA/ MBTA) ) for fixing of CPVC pipe complete all as specified and as directed.

Supply & Fixing Vitreous China Squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rests complete all as specified and as directed.

S&F Wash down water closet (Pedestal pattern) using vitreous China squatting pan of pattern “long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern including PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern, Plastic water closet seat, white, recessed bottom pattern and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F vitreous china white urinals full stall, flat back of complete including providing and fixing plugs, screw, 32 mm dia flush pipe, waste fittings, grating, unions for discharge pipe etc (excluding flushing cistern) complete as specified and as directed.

S&F PVC low level 10 lit capacity valve less syphonic action type flushing cistern with inlet ball valve and handle including brackets complete all as specified and as directed.

S&F PVC connections of 15mm size with PTMT nuts of 600mm long complete all as specified and as directed.

S&F bib taps chromium plated 15mm alloy with crutch or butter fly handle screwed down screwed for iron pipe 15mm bore complete all as specified and as directed.

S&F 32 mm bore PVC LDPE pipe with complete fitting as waste pipe for WHB/Kitchen sink/Urinal etc complete all as specified and as directed.

S&F15 mm bore angle stop valves cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed withr iron pipe of union complete all as specified and as directed.

S&F Brass CP soap dish compete all as specified and as directed.

S&F 600 mm long Brass CP towel rail compete all as specified and as directed.

S&F Brass CP health faucet with 1 mtr flexible tube and hook compete all as specified and as directed.

S&F Brass CP paper holder fixing to wall with ss screw compete all as specified and as directed.

S&F 15 mm bore Brass CP wash hand besin mixer for mixing hot & cold water screwed down complete all as specified and as directed.

S&F sinks with drainage board made of stainless steel 304 Grade, lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall and connecting union to pipe overall bowl size 750mm x 500mm x 230mm etc complete all as specified and as directed.

S&F 15 mm bore Brass CP sink mixer for mixing hot & cold water screwed down complete all as specified and as directed.

S&F 75mm dia of outlet, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall/Floor, complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) bends any radius with oval access doors complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S & F PVC (SWR) vent cowl suitable for 110 mm bore of pipe complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) junction (single ‘T’) equal or un-equal complete all as specified and as directed.

S&F grating dome 100 mm dia of PTMT (minimum weight 25 gms) complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) reducers complete all as specified and as directed.

M&L for roof treatment with polymeric membrance (APP based) with non woven polyster mat as reinforcement as per following specifications complete all as specified and as directed:- (a) M&L for cleaning the new plastered surface and providing & laying a coat of cold applied bitumen 85/25 based primer on entire surface @ 0.30 Ltr/Sqm on dry and clean surface. (b) M&L for providing & laying APP based polymeric membrane of 3 mm thickness of weight not less than 3.0 Kg/Sqm with non woven polyster fibre as reinforcement on primed surface by torch application with 15 cm end over laps & 10 cm side over laps etc as per manufacturers instruction. (c) M&L for finishing of top surface by applying two coats of aluminium.

M&L Granite (of any type) 18 to 20mm thick work (table rubbed and polished) in floors, steps, jambs, pillars, window-cills, cooking platforms including 20mm thick screed bed or bedding in cement mortar 1:6 for laying floor finishes complete all as specified and as directed.

S&F aluminium powder coated door with partially glazed shutters single/ double leaf divided into two glazed panels including aluminium anodised snap beading and rubber gasket/lining for fixing of glass as directed. The frame shall be fixed with aluminium anodised bolt by drilling in the existing wall and with thrust bolt of suitable size all as directed. The frame and shutter will be made out of the following section and fitting a) Aluminium anodised door frame 101.60 mm x 44.75 mmx2mm fixed with aluminium thrust bolt in walls by drilling as directed. b) Aluminium anodised sides rail of shutter section 83.5mmx 44.5mm x 2mm c) Aluminium anodised bottom rail of shutter section 150mm x 44.5 mm x2mm. d) Aluminium anodised top and middle rail of shutter section 100mm x 44.5 mm x 2mm. e) Aluminium anodised tower bolt 200 mm long - 02 Nos in each leaf. f) Aluminium anodised handle 250 mm long 02. Nos in each leaf. h) Glass Pane shall be 5.5 mm thick tinted glass. j) 12mm thick prelaminated particle board laminated both side exterior grade and lock including complete all as specified and as directed.

Supply, fabricating and fixing windows with frame of aluminium powder coated of extruded aluminium section two track with two sliding shutters with following sections (a) Frame section shall be 63.50 mmx38.10 mmx2 mm thick. (b) Two track bottom rail for sliding of shutters 61.85mm x 31.75mmx2mm thick. (c) Two track top section shall be 61.85mmx31.75mmx2mm thick(d) for sliding shutter handle& 'H' bottom section should be 40mmx(18mm+9)mmx1.45mm thick(e) sliding shutter to be provided with 5.5mm thick sheet glass tinted, plain, frosted (f) stainless steel wire clothes 0.36mm nominal dia of wire and average width of aperature 1.40mm complete all as specified and as directed.

M&L for powder coated aluminium frame ventilator shutters, sliding type with or without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, 4 to 5mm thick glass panes, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays/lock, Rollers, hinges type B-21 100mm long (2 Nos.) suitable handle (1 No. per shutter) complete all as specified and as directed.

S&F factory made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per secification & drawing complete all as specified and as directed.

S&F solid PVC Door Frame of size 50mm x4 7mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F 100 mm size butt hinges stainless steel type complete all as specified and as directed.

S&F 75 mm size butt hinges stainless steel type complete all as specified and as directed.

S&F 100mm long butt hinges medium weight cold rolled mild steel with brass screws complete all as specified and as directed.

S&F 200mm long aluminium anodized barrel tower bolt of extruded section and fixed complete all as specified and as directed.

S&F 150mm long alluminium handles, cast type, anodized and fixed complete all as specified and as directed.

S&F of 18/19mm thick PVC moulded solid board one side prelam for cabinet boxes etc with self and shutter full size fitted under/ above the kitchen cooking platform and other platform including piono hinges knob and magnetic catches complete all as specified and directed incl provision of fixing arrangement/ fixing & fixtures complete all as specified and as directed.

M & L cement concrete type B-0 1:2:4 (using 12.5mm graded stone aggregate) for bed block, hold fast, coping and similer work complete all as specified and as directed.

S & F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S & F 35mm 2nd class hard wood skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 complete all as specified and as directed.

M&L for applying two coat of synthetic enamel paint on wooden surfaces of any description not otherwise described over 10 cm width or girth over red oxide including necessary preparation complete all as specified and as directed.

Excavating in post holes soft/ loose soil (or similar holes) each not exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed.

M&L for cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) as in foundations, filling and mass concret etc complete all as specified and as directed.

S&F Steel work as in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc prepartion of surface at contractor workshop before fabrication Fe-290 (Gde E-165)?complete all as specified and as directed

S&F Mild steel bolts with washer Not Exc 12 mm dia purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with MS angle Iron and similer articals (washers and one hexagonal or square nut. Exc 30cm long) complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces, width or girth exc 10cm including necessary preperation of surfaces complete all as specified and as directed.

S&F Aluminium powder coated cutain tracker with complete fitting arrengment fixing with wall, rolling wheel, hanging complete all as specified and as directed.

S&F in replacement stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

Supply & fixing Pre-painted galavalume alumininum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPa (having weight not less than 4.35Kg/Sqm) as in roof covering fixed with cadmium plated self tapping screws of suitable size complete all as specified and as directed.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials outside MOD land (As approved by local Municipal Authorities) by mechanical means including loading, transporting and unloading the same complete all as specified and as directed.

Supply and laying dry river sand for cushioning to interlocking paver block including punning down of sand complete all as specified and as directed. Note: for measurement purpose punned thickness of sand only shall be considered.

M&L for 80 mm thick, Machine pressed precast concrete interlocking rubber moulded paver block any shape, colour and size confirming to IS 15658-2006, M-40 Grade, with grey cement and pigment complete all as specified and as directed.

M&L point wiring for modular switches with 1.5 sqmm, single core, multi stranded copper conductor PVC insulated and unsheathed (FRLS) cable 1100 Volts grade, drawn through and including concealed Conduit as requirement of site including cadmium plated screws as per ISI, size PVC insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly for One light point controlled by one switch 5 Amps one way single polecomplete all as specified and directed.

All as per item No. 93.00 here-in-before but one three pin 5 Amps socket out let on independent board complete all as specified and as directed.

All as per item No. 93.00 here-in-before but one three pin 5 Amps socket out let on same board complete all as specified and as directed.

All as per item No. 93.00 here-in-before but point wiring of copper cable multi stranded 2.5 Sqmm size for 15 Amps socket outlet on independent board with 2.5 Sqmm size of earth conductor complete all as specified and as directed.

All as per item No. 93.00 here-in-before but point wiring of copper cable multi stranded 4.00 Sqmm size for AC point wiring with 4.0 Sqmm size of earth conductor complete all as specified and as directed.

S&F modular switch 1 way 6 Amp 1 Module complete all as specified and as directed.

S&F Modular Switch 1 way 16 Amp 1 Module complete all as specified and as directed.

S&F Modular Socket 6A 2/3 Pin combined 2 module complete all as specified and as directed.

S&F Modular Socket 16A/ 6A 2/3 Pin combined 2 module complete all as specified and as directed.

S&F Modular Bell push 6A 1 Module complete all as specified and as directed.

S&F stepped type electronic fan regulator, white polycarbonate body, flush type, 230 V, including connecting complete all as specified and as directed.

S&F sheet metal enclosure with socket plug top, single pole and neutral enclosure with a two pin earth plug and socket complete with one MCB of capacity 20 Amps, 240 Volts complete all as specified and as directed.

M & L Sub main wiring using two single core PVC insulated FRLS cable 4 sqmm copper conductor multi stranded and 4.0 sqmm copper conductor insulated cable using as earth wire and drawing in to and including 25mm PVC conduit medium grade complete all as specified and as directed. Note:- Two runs of 4sqmm copper FRLS cable & one run of 4.0 sqmm copper cable in and including 25mm PVC conduit medium grade will be measured as one unit.

M & L Sub main wiring using two single core PVC insulated FRLS cable 6 sqmm copper conductor multi stranded and 6.0 sqmm copper conductor insulated cable using as earth wire and drawing in to and including 25mm PVC conduit medium grade complete all as specified and as directed. Note:- Two runs of 6 sqmm copper FRLS cable & one run of 6.0 sqmm copper cable in and including 25mm PVC conduit medium grade will be measured as one unit.

M & L submain wiring using four run PVC insulated FRLS Copper conductor 10 sqmm with rigid non metalic PVC conduit of size 32 mm dia medium grade inclusive of boxes (junction/terminal) all tees, bends, elbows, reducers bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook including all fixtures /fittings fixed on wall/ceiling with saddles PVC with earth continuity wire copper conductor PVC insulated unsheathed 10 Sq mm etc complete all as specified and as directed. Note:- four runs of 10 sqmm copper FRLS cable & one run of 10 sqmm copper cable in and including 32 mm PVC conduit medium grade will be measured as one unit.

S & F distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 12 way with 200 Amps rated copper busbar, neutral bar, earth bar, IP 43 protection, single pole and neutral 250 Volts, flush to wall complete all as specified and directed. Make : Legrand Model: 507612 or equivalent model of make mentioned in PS.

S & F MCB SP 240 Volts, 6 to 40 Amps complete all as specified and as directed.

S & F MCB SPN, 240 Volts, 63 Amps complete all as specified and as directed.

S & F Earthing complete with galvanised GI earth plate eletrode 600x600x6mm thick,burried directly in ground (earth pit not less than 2.25mtrdeep below GL) with top edge of the plate n.less than 1.5mtr below normal.GL surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all round the plate using 4mm dia GI wire as earth wire electrode welded and revetted to earth plate at one end connected to main DBs of Bldg at another end GI earth wire encased in and including 15mm dia GI light grade pipe through upper end of earth plate upto main DB of bldg with 20mm bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate MS funnel with wire mesh fixed on water pipe and Provn of PCC pit in PCC 1:2:4 type B-1 chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type BI duly reinforeced with MS bars 8mm dia @ 150C/c with both ways complete with lifting handle all as shown in electrical plate no 5 of SSR of part-I (1991) complete all as specified and as directed.

S&F energy efficient Surface/Wall Mounted 20W integrated LED batten 4 feet Fitting with polycarbonate housing. Total system Lumen of 20W to 22W LED should be 2200 or above in Cool day Light(5700K to 6500K), Power factor>0.95, CRI (Ra) >80, System Lumen Efficacy>110 Lm/w, THD(%) < 20, LED Lamp LED Lamp Efficacy>130 Lm/W with Average life of 50000 Burning hours. complete with all accessories as required with connections. complete all as specified and as directed. Make - Havells cat Part No. - LUMILINEBS20WLED865SPCWH, Wipro Cat part No. - LL20221XXX65NE3 or equivalent model of make mentioned in PS.

S&F energy efficient LED batten tube light, Surface/Wall Mounted 9W to 10W integrated LED 2 feet Fitting with polycarbonate housing. Total system Lumen of 9W Led should be 990 or above in Cool day Light(5700K to 6500K), Power factor>0.95, CRI (Ra) >80, System Lumen Efficacy>110 Lm/w, THD(%) < 20, LED Lamp, LED Lamp Efficacy>130 Lm/W with Average life of 50000 Burning hours. Complete with all accessories as required with connections complete all as specified and as directed. Make:- Havells Cat Part No. - LUMILINEBS9WLED865SPCWH/ Wipro CAT Part No. - LL20111XXX65NE3 or equivalent model of make mentioned in PS.

S&F in repair LED building securityLight fitting 45 watt, system efficiency not less than 100 lumen / watt, IP65 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws, including pre fabricated GI bracket of suitable size with clamps nuts and bolds & connecting with three core copper wire after taking down old light fitting of any description complete all as specified and as directed. Make :- Havells - Cat part No:-ENDURAPEARLNEOSL45W LED757SASYTOPC or equivalent model of make mentioned in PS.

S & F Ceiling rose, PVC/ polycarbonate, isolated body type three terminal, 240 volt complete all as specified and as directed.

S& F exhaust fan PVC type 300 mm dia sweep, 900 RPM, 240 Volt with louver shutter and brackets, connection with flexible PVC copper cable 3 core of size 1.5 Sqmm of length from ceiling rose to exhaust fan including nut bolt and washers of suitable size complete all as specified and as directed.

Fixing only ceiling fan (White colour) 230 V, 1400 mm sweep,speed 290 RPM, having rod length 300 mm complete all as specified and as directed. Note: Ceiling fan shall be issued under Sch 'B' free for fixing.

Fixing only five star rated Geysers of Capacity 25 Ltr, Electric Driven, Single phase, 240 V, Storage vertical type and heating element 2 KW, inner shell made up of copper, automatic cutoff including electrical and water connection and fixed on the wall with mild steel fastner 150 mm long and 10 mm dia with pin and bolts complete all as specified and as directed. Note: Geyser shall be issued under Sch 'B' free for fixing.

S&F module cover plate with frame for following module complete all as specified and as directed.

2 module

3 module

4 module

6 module

12 module

16 module

S&F Moduler metal Flush box complete all as specified and as directed.

2 module

3 module

4 module

6 module

12 module

16 module

Supply, installation, testing & commissioning of air cooled inverter based split AC unit functions, Air conditioner is electridriven single phase minimum 5 star rating of capacity 2.0 TR with charged with Eco friendly Refrigerent R410A/R32 and comes with special health filter and all connected accessories and copper tubing from indoor to outdoor with poper nitrile insulation and making of hole in any type of wall, including PVC drain pipe from indoor unit upto plinth protection of building , Outdoor split AC hanging wall mounted stand and flexible PVC pipe minimum 40mm dia covered on all exposed copper insulated pipe line and PVC wire with connected accessories etc all as specified and as directed.

S&F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and as directed.

M&L in replacement point wiring for modular/Normal switches with 1.5 Sqmm, PVC insulated, unsheathed, multistranded, copper conductor Cable, FRLS, 1100 Volt grade, drawn through and including Surface/concealed, rigid non-metallic PVC Conduit of minimum 25mm dia or as per site requirement with all fittings, including cadmium plated screws as per IS, including 1.5 Sqmm size, PVC insulated, unsheathed, copper earth continuity conductor, connected to earth dolly, suitable for One light/fan/bell point controlled by one No, 5 Amp, one way switch/bell push complete all as specified and as directed.

All as per item No. 123.00 here in before but point wiring with 4.00 Sqmm, multistranded, copper conductor cable, for AC point on independent board with 4.00 Sqmm size earth conductor complete all as specified and as directed.

S&F in replacement Switch Piano, flush butten type, single pole, one way, white polycarbonate body, 6 Amp, 230 V including connecting complete all as specified and as directed.

S&F in replacement modular switch, 1 way, 6 Amp, 1 Module, complete all as specified and as directed.

S&F in replacement Ceiling rose, PVC/ polycarbonate, isolated body type, three terminal, 240 volt, fixed in position & connecting complete all as specified and as directed.

S&F in replacement stepped type, electronic fan regulator, 280 V, suitable for BLDC fan of any size including connecting complete all as specified and as directed.

S&F in replacement modular, stepped type, electronic fan regulator, 280 V, 2 Module, suitable for BLDC fan of any size including connecting complete all as specified and as directed.

Fixing only in replacement ceiling fan, 1200/1400 mm sweep, 240 Volt,with suitable size down rod, MS hook & required welding work including necessary connection with flexible PVC Copper cable, 3 core, size 1.5 Sqmm of length from ceiling rose to ceiling fan including nut bolt and washers of suitable size complete all as specified and as directed. Notes: (i) Ceiling Fan shall be issued under Schedule 'B' "Free for Fixing") (ii) Old unserviceable ceiling Fan shall be deposited in MES Store yard by the contractor.

Fixing only in replacement exhaust fan, 300/450mm dia sweep, heavy duty with louver shutter and brackets, including connection with flexible PVC copper cable 3 core of size 1.5 Sqmm of length from ceiling rose to exhaust fan including nut bolt and washers and making suitable size of hole in brick/PCC block/ Stone masonary wall built in cement mortar and making good disturbed surface complete all as specified and as directed. Notes: (i) Exhaust Fan shall be issued under Schedule 'B' "Free for Fixing") (ii) Old unserviceable Exhaust Fan shall be deposited in MES Store yard by the contractor.

Fixing only in replacement storage type Geysers of capacity 25 Ltr, Electric Driven, vertical type and heating element 2 KW, including electrical and water connection with hot and cold water PVC connection pipe of suitable length and fixed on the wall with mild steel fastner 150 mm long and 10 mm dia with pin and bolts complete all as specified and as directed. Notes: (i) Storage type Geyser shall be issued under Schedule 'B' "Free for Fixing") (ii) Old unserviceable Geyser shall be deposited in MES Store yard by the contractor.

S&F in replacement angle cock, brass, chromium plated, (with flange) screwed down, screwed for 15 mm bore iron pipe or brass ferrule complete all as specified and as directed.

S&F in replacement 15mm Bib taps, brass, chromium plated, (with flange), screwed down, screwed for 15mm bore iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in replacement 15mm bore galvanised steel water tubing, medium grade, with all fittings, fixed to walls/ceilings or laid in floor and cutting the existing pipe and making connection with new pipe including proper clamping with MS hooks complete all as specified and as directed.

S&F in replacement sheet metal enclosure with socket plug top, single pole and neutral enclosure with a two pin earth plug and socket complete with one MCB of capacity 20 Amps, 240 Volts complete all as specified and as directed.

S&F in replacement modular cover plate with frame, 2 module complete all as specified and as directed.

S&F in replacement modular metal flush box, 2 modules complete all as specified and as directed.

S&F in repair Pedestal fan of sweep 450 mm, 240 volts with all connected accessories five star rated complete all as specified and as directed.

S&F in repair Wall/ Cabin fan of sweep 400 mm, 240 volts, with all connected accessories five star rated complete all as specified and as directed.

Note for item No. 139.00 & 140.00:- Old unserviceable Padestal Fan/ Wall/ Cabin fan shall be deposited in MES store yard by the contractor.

M/S Rohit Enterprises

Vishal Traders