ESTIMATE FOR REPAIRING AND MODERIZATION OF GATES and GEARING SYSTEM OF HEAD REGULATOR OF LAMBI DISTRIBUTARY AT RD 386325 OF SIRHIND FEEDER

Providing & fixing in position of flat/wedge seal including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge.(75 mm dia x 10 mm th.)

Providing of hollow bulb seal & fixing in position including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge. (100/44 x 10mm)

Supply, Providing and fixing of Bolts & Nuts (for seals of all types) with washer of all sizes and length required as per sample / drawing / direction of Engineer-In charge complete in all respects.

Commisioning & testing of Gates at site complete in all respects and to entire satisfaction of Engineer In charge. (30)

Providing & Fixing Clamp Plate, complete in all respects

Providing Gate wheel assembly complete in all respects to entire satisfaction of engineer-in-charge 280mm dia (67(II))

Assembling and fixing in position Gate Wheel Assembly complete in all respects and to entire satisfaction of Engineer-in-charge. (4)

Providing & Fixing of Wheel Pin in position complete in all respects and to entire satisfaction of Engineer-in - charge. (upto 75mm/above 75mm)

Providing Spherical Roller Bearing No. 22212-C make SKF

Fixing Roller Bearing complete in all respects (55)

Providing and fixing Grease Nipple (27)

Providing and Fixing Rope Drum Cover (47)

Scrapping, Brushing to remove paint to base metal surface. (CSR 16.36)

CSR 16.17 & Painting of gate leaf with 16.27 primer coat and two coats with Anti corrosive Bitumastic paint to give an even shade with special quality paint. (CSR 16.17 & 16.27)

CSR 16.20 & Painting two coats with ready 16.17 mix synthetic enamel paints over one coat metal primer (CSR 16.20 & 16.17)

Providing and Fixing Skin Plate 10mm

Providing and Fixing ISMB 200 x 100 mm

Providing and Fixing ISMC 200 x 75 mm

Providing and Fixing of ISA 80x80x8mm

Providing and Fixing of Side Plate 1700 x 200 x 10mm

Providing and Fixing of Plate 250 x 40 x 15mm

Providing and Fixing of Plate 40 x 40 x 10mm

Providing and Fixing of MS Square Bar 25 x 25 mm

Providing and Fixing of Plate 1700 x 150 x 10mm

Providing and Fixing of Gate Pulley (size 320mm dia) including Gun Metal Bush and Pin for lifting arrangements complete in all respect. (Analysis)

Providing and Fixing Bearing Retainer OD 150mm, ID 60mm x 20mm

Providing and Fixing of Plate OD 80mm, ID 60mm x 12mm

Providing and Fixing of Locking Plate 40 x 20 x 10mm

Providing and Fixing of Plate 275x2135x16mm

Providing and Fixing of Plate 364x2135x8mm

Providing and Fixing of Plate 275x2135x8mm

Providing and Fixing of Plate 45x2135x20mm

Providing and Fixing of Plate 100x2135x10mm

Providing and Fixing of Plate 350x350x16mm

Providing and Fixing of J Anchor Dia 16x440mm Long

Providing and Fixing of J Anchor Dia 16x400mm Long

Providing and Fixing of J Bolt Dia M-20x1130mm Long

Providing and Fixing of J Anchor Dia 16x360mm Long

Providing and Fixing of ISST 200mm

Providing and Fixing of ISMB 250x125mm

Providing and Fixing Stainless Steel Flat

Providing and Fixing Three Bay Column, Deck and Staircase (sub estimate attached)

Supply of multi purpose Synthetic hetiv grease

Supply of Diesel (Market Rate)

Supply of Mobil Oil

Drilling/Boring hole including rimming complete in all respects and to entire satisfaction of engineer in charge

Fixing and Holding the gate with the help of 35 tonne capacity crane.

Welding work (6mm)

CI Housing cover with worm and worm wheel assembly, shaft , handle GM bust with triple start threading inside for spindle complete including labour charges.

MS SPINDLE With double start or triple start threading 11' height 1/3/4" dia upto 1.50 ton capacity

Supply and fixing of spindle cover (pipe)

Any other item

S.K SOOD