Construction of High Level Bridge at Km.21 2 of Gudiyatham Gadambur Kailasagiri Vaniyambadi Road across Malataru river

Amount

Earth work excavation in all classes of soils except hard rock requiring blasting and depositing on bank, with all leads and lifts as per SS20B, including all other incidental charges such as bailing out water, shoring, strutting, walling and forming protective bunds wherever necessary, etc., complete etc., complete as per relevant standard specification, for DRESSING THE BED UP TO SILL as per MORT&H Vth Revision 304.

Earthwork excavation in all classes of soil except hard rock requiring blasting and depositing on bank, with all leads and lifts as per SS20B, including cost of all labour, equipments and all incidental charges such as baling our water, providing and maintaining necessary cofferdams, sheeting, shoring, bracing, and their subsequent removal, removal of all logs, stumps and other deleterious matter and obstructions, trimming bottom of excavation backfilling and clearing the site and disposal of all surplus materials etc., complete as per relevant standard specification for FOUNDATION OF ABUTMENTS & PIERS as per Section 304 of MORT&H Specifications (Fifth Revision).

Providing and driving in position permanent MS liners for piles from bottom of pilecap as per Cl.709.1.4 of IRC 78-2014 including cost of liners and fabricating, welded construction with consumable, labour and plants and driving MS liners 6mm thick to be left permanently with the pile shaft as per requirement and as per standard specification, and placing them in position with all leads and lifts etc., complete as per Sections 1100 & 1600 of MORT&H Specifications (Fifth Revision).

Vibrated reinforced cement concrete of grade M35 (Design mix) using 20mm ISS HBG graded metal Bored-cast-in-situ piles of 1200mm diameter, as per Cl.709.1.9 of IRC:78-2014, including cost and conveyance of all materials to site and cost of cement at site but excluding cost and conveyance of all materials to site and cost of cement at site but excluding cost and fabrication of steel and placing it in position before concreting setting up of piling equipment, shifting the same for one pile location to another pile location dismantling and including all labour for boring through all soils, leading the excavated earth to a distance 200 m including forming of working platform over the river bed for accomadating piling equipment forming approaches to the working paltform, mixing concrete, filling it in position by tremie pipe, cutting of pile head to cut-off level for casting pilecap, including diversion of water course if necessary and all other incidental charges etc., complete as per standard specifications, forming and maintaining protective bunds and all other incidental charges etc., complete for PILES BELOW ABUTMENTS AND PIERS as per Sections 1100 & 1700 of MORT&H Specifications (Fifth Revision).

Vibrated plain cement concrete of grade M15 (Nominal mix 1:2:4) using 40mm ISS HBG graded metal, including cost and conveyance of all materials to site and cost of cement at site including potable water ,labour charges for mixing,transporting, laying compacting, curing concrete , Tools and Plants and incidental charges such as bailing out water, maintaining protective bunds,cofferdams,shoring,structting etc; complete as per relevant standard specification, for LEVELLING COURSE BELOW PILE CAP UNDER ABUTMENTS & PIERS as per Sections 1000, 1500, 1700, 2200 of MORT&H Specifications (Fifth Revision).

Vibrated reinforced cement concrete M35(Design mix) using 20 mm ISS HBG graded metal including cost and conveyance of all materials to site excluding cost of steel but including cost of formwork,Soft water,labour charges for mixing, transporting, laying,curing concrete,working at depths,hire charges for tools and plants including all other incidental charges such as bailing out water, maintaining of protective bunds, cofferdams, shoring, strutting etc., complete as per relevant standard specification for PILECAPS UNDER ABUTMENT, RETURN WALLS AND PIERS as per Sections 1000, 1500 & 1700, 2200 of MORT&H Specifications (Fifth Revision).

Vibrated reinforced cement concrete M35 (Design mix) using 20 mm ISS HBG graded metal including cost and conveyance of all materials to siteand cost of cement at site but excluding cost and fabrication of steel but including cost of formwork,labour charges for mixing, transporting, laying,curing concrete,working at heights ,hire charges for tools and plants including all other incidental charges, etc., complete for ABUTMENT AND RETURN WALL SUBSTRUCTURE as per Sections 1000, 1500, 1700 & 2200 of MORT&H Specifications (Fifth Revision).

Vibrated reinforced cement concrete M35 (Design mix) using 20 mm ISS HBG graded metal including cost and conveyance of all materials to siteand cost of cement at site but excluding cost and fabrication of steel but including cost of formwork,labour charges for mixing, transporting, laying,curing concrete,working at heights ,potable water,hire charges for tools and plants including all other incidental charges, etc., complete for BED BLOCK CUM DIRTWALL OVER ABUTMENTS as per Sections 1000, 1500, 1700 & 2200 of MORT&H Specifications (Fifth Revision).

Vibrated reinforced cement concrete M35 (Design mix) using 20 mm ISS HBG graded metal including cost and conveyance of all materials to siteand cost of cement at site but excluding cost and fabrication of steel but including cost of formwork,labour charges for mixing, transporting, laying,curing concrete,working at heights ,potable water,hire charges for tools and plants including all other incidental charges, etc., complete for PIERS-1500mm dia as per Sections 1000, 1500, 1700 & 2200 of MORT&H Specifications (Fifth Revision).

Vibrated reinforced cement concrete M35 (Design mix) using 20 mm ISS HBG graded metal including cost and conveyance of all materials to siteand cost of cement at site but excluding cost and fabrication of steel but including cost of formwork,labour charges for mixing, transporting, laying,curing concrete,working at heights ,potable water,hire charges for tools and plants including all other incidental charges, etc., complete for CAPPING BEAM OVER PIERS as per Sections 1000, 1500, 1700 & 2200 of MORT&H Specifications (Fifth Revision).

Supplying and fixing of Elastomeric bearing of size 500x320 x 80 mm including cost and conveyance to work site, labour for fixing the bearing in position and all other incidental charges etc., complete asper Section 2000 of MORT&H Specifications (Fifth Revision) and IRC:83-2015 (Part-II).

Vibrated reinforced cement concrete M35 (Design mix) using 20 mm ISS HBG graded metal including cost and conveyance of all materials to siteand cost of cement at site but excluding cost and fabrication of steel but including cost of formwork,labour charges for mixing, transporting, laying,curing concrete,working at heights ,potable water,hire charges for tools and plants including all other incidental charges, etc., complete for T-BEAMS and CROSS BEAMS as per Sections 1000, 1500, 1700 & 2300 of MORT&H Specifications (Fifth Revision).

Vibrated reinforced cement concrete M35 (Design mix) using 20 mm ISS HBG graded metal including cost and conveyance of all materials to siteand cost of cement at site but excluding cost and fabrication of steel but including cost of formwork,labour charges for mixing, transporting, laying,curing concrete,working at heights ,potable water,hire charges for tools and plants including all other incidental charges, etc., complete for DECK SLAB, KERB & FOOTPATH as per Sections 1000, 1500, 1700 & 2300 of MORT&H Specifications (Fifth Revision).

Vibrated reinforced cement concrete M30 (Design mix) using 20 mm ISS HBG graded metal including cost and conveyance of all materials to siteand cost of cement at site but excluding cost and fabrication of steel but including cost of formwork,labour charges for mixing, transporting, laying,curing concrete,working at heights ,potable water,hire charges for tools and plants including all other incidental charges, etc., complete for HANDRAILS AND POSTS as per Sections 2703-3 of MORT&H Specifications (Fifth Revision).

Vibrated reinforced cement concrete M40 (Design mix) using 20 mm ISS HBG graded metal including cost and conveyance of all materials to siteand cost of cement at site but excluding cost and fabrication of steel but including cost of formwork,labour charges for mixing, transporting, laying,curing concrete,working at heights ,potable water,hire charges for tools and plants including all other incidental charges, etc., complete for CRASH BARRIER ON INNER EDGE OF FOOTPATH as per Sections 811,1700 & 2703.3 of MORT&H Specifications (Fifth Revision).

Providing and fixing of G.I. Drainage spouts 100mm dia as per GOI drawing SD/205 with grating arrangements at top as shown in the drawing and 100mm dia drainage spout projecting atleast 300mm beyond the bottom of deck slab as shown in the drawing including cost and conveyance of Galvanised Iron pipes and flats and fixing them in position, etc.,complete as per Section 2705 of MORT&H Specifications (Fifth Revision).

Vibrated Plain Cement Concrete of grade M15 ( Nominal mix 1:2:4) using 40mm ISS HBG graded metal including cost and conveyance of all materials to site and cost of cement at site, including cost of formwork, labour charges for mixing, transporting, laying and curing concrete , potable water , Tools and plants and incidental charges etc., complete as per relevant standard specification, for PARAPET OVER RETURN WALLS as per Sections 1000, 1500 & 1700 of MORT&H Specifications (Fifth Revision).

Supplying and installation of STRIP SEAL EXPANSION joint system conforming to specification for Road and Bridge Works published by Ministry of Surface Tranport(Roads Wing) in the 40mm wide expansion gap provided in between decks over piers and in between deck and dirt wall over abutment with fatigue tested structural steel section at the nosing and anchorage assembly, including cost and conveyance of materials,cost of testing as per the MORT&(H) specifications, including labour, equipment and incidental charges for fixing the joints complete in all respects, as per Section 2600 of MORT&H Specifications (Fifth Revision).

Vibrated Plain Cement Concrete of grade M15 ( Nominal mix 1:2:4) using 40mm ISS HBG metal, including cost and conveyance of all materials to site and cost of cement at site, including all labour charges for mixing concrete ,laying,hire charges for Tools and plants, compacting,curing with leads for soft water, including all other incidental charges, form work etc., complete for BASE COURSE BELOW APPROACH SLAB,FOOTPATH RAMP & FOOTPATH RAMP as per Sections 1500, 1700 & 2074 of MORT&H Specifications (Fifth Revision).

Vibrated reinforced cement concrete M30 (Design mix) using 20 mm ISS HBG graded metal, including cost and conveyance of all materials to site and cost of cement at site but excluding cost and fabrication of steel including cost of formwork,labour charges mixing, transporting, laying,curing concrete,working at heights ,hire charges for tools and plants including all other incidental charges, etc., complete for APPROACH SLAB as per Sections 1500, 1700 & 2704 of MORT&H Specifications (Fifth Revision).

Vibrated Cement Concrete of grade M30 (Design mix) 75mm uniform thick with surface reinforcement conforming to Sections 2702.2 of MORT&(H) Fifth revision, using ISS HBG graded metal,including cost and conveyance of all materials to work site including cement at site, including all labour charges for mixing concrete, laying, hire charges for Tools and Plants, compacting, curing with all leads for potable water, including all other incidental charges formwork, etc, complete for WEARING COAT OVER DECK SLAB AND APPROACH SLAB as per Section 2702.2 of MORT&H specifications (Fifth Revision).

Providing and fixing Class 1 PVC seepage pipes of 100 mm dia of required lengths for abutments and wing walls including costs and conveyance of all materials to work site and labour charges for fixing, etc.,complete to drain the backfill as per Section 2706 of MORT&H Specifications (Fifth Revision).

Providing FILTER MEDIA behind Abutment and return walls for 600mm thickness using filter material as per appendix 6 of IRC:78-2014 wellpacked with smaller size towards the soil and bigger size towards the wall including cost and conveyance to work site including all labours and other incidental charges,etc complete as per Cl.710.1.4 & Appendix-6 of IRC:78-2014.

Filling behind Abutments and Return walls as per Appendix 6 of IRC:78-2014 with filling material having Ø value more than 35° free from cohesion, including cost and conveyance to worksite, laying, handling charges and filling in layers tamping under optimum moisture content to get the maximum density, including watering, with all leads and lifts for water and all other incidental charges, etc., complete as per Cl.710.1.4 & Appendix-6 of IC:78-2014.

Supply and fabrication of Fe-500 D grade steel required for all RCC items of works involved in the schedule, including cost of steel at site and cost of fabrication labour charges for cleaning the rods straightening, cutting, bending, tying grills, including over lapping to the required length wherever necessary and providing to the reinforcement placing the reinforcement in position as specified in the drawings including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges, etc.,complete as per Section 1600 of MORT&H Specifications (Fifth Revision).

Supply and fabrication of Fe-240 grade steel required for all RCC items of works involved in the schedule, including cost of steel at site and cost of fabrication labour charges for cleaning the rods straightening, cutting, bending, tying grills, including over lapping to the required length wherever necessary and providing to the reinforcement placing the reinforcement in position as specified in the drawings including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges, etc.,complete as per Section 1600 of MORT&H Specifications (Fifth Revision).

Supply and fixing of High quality of PVC Duct pipes of 160 mm dia 4 Kg/cm2 including cost and conveyance of pipes to the sie and fixing in position to proper grade and level, including labour charges for fixing and including all other incidental charges complete for providing utility services in footpaths as per Section 2706 of MORT&H Specifications (Fifth Revision).

CONSRUCTION OF MINOR BRIDGE

Earthwork excavation in all classes of soil except hard rock requiring blasting and depositing on bank with all leads and lifts as per SS20B, including cost of all labour, equipments and all incidental charges such as baling our water, providing and maintaining necessary cofferdams, sheeting, shoring bracing and their subsequent removal, removal of all logs, stumps, grubs and other deleterious matter and obstructions, trimming bottom of excavation backfilling, and clearing the site and disposal of all surplus materials etc., complete as per relevant standard specification for DRESSING THE BED UP TO SILL LEVEL as per MORT&H Vth Revision 304.

Earthwork excavation in all classes of soil in Soft disintegrated Rock not requiring blasting except medium rock and hard rock requiring blasting and depositing on bank with all leads and lifts as per SS20B, including cost of all labour, equipments and all incidental charges such as baling our water, providing and maintaining necessary cofferdams, sheeting, shoring bracing and their subsequent removal, removal of all logs, stumps, grubs and other deleterious matter and obstructions, trimming bottom of excavation backfilling, and clearing the site and disposal of all surplus materials etc., complete as per relevant standard specification for FOUNDATION OF ABUTMENTS, PIERS AND WINGS as per MORT&H Vth Revision 304

Vibrated Cement Concrete of grade M20 Nominal Mix using 40mm ISS size HBG graded metal including cost and conveyance of all materials to site including cost of cement at site including cost of formwork, soft water, labour charges for mixing, transporting, laying and curing concrete , working at depths , tools and plants and maintaining of protective bunds, cofferdams, shoring, strutting etc., complete as per relevant standard specifications, for FOOTINGS OF ABUTMENT AND WINGS BELOW SILL LEVEL as per MORT&H Vth Revision 1000, 1500, 1700, 2200

Vibrated Cement Concrete of grade M20 Nominal Mix using 40mm ISS size HBG graded metal including cost and conveyance of all materials to site including cost of cement at site including cost of formwork, soft water, labour charges for mixing, transporting, laying and curing concrete , working at depths , tools and plants and including all other incidental charges etc; complete as per relevant standard specifications, for SUBSTRUCTURE OF ABUTMENTS, WINGS ABOVE SILL LEVEL as per MORT&H Vth Revision 1000, 1500, 1700, 2200

Vibrated Reinforced Cement Concrete of grade M30 design mix using ISS size HBG graded metal including cost and conveyance of all materials to site including cost of cement at site including cost of formwork, soft water, labour charges for mixing, transporting, laying and curing concrete , working at depths , tools and plants including all other incidental charges etc; complete as per relevant standard specifications, for DIRT WALL CUM BED BLOCK OVER ABUTMENTS AND BED BLOCK OVER PIERS as per MORT&H Vth Revision 1000, 500, 1700, 2200

Providing and fixing Class 1 PVC seepage pipes of 100 mm dia of required lengths for abutments and wing walls including costs and conveyance of all materials to work site and labour charges for fixing, etc.,complete to drain the backfill as per Section 2706 of MORT&H Specifications (Fifth Revision).

Providing and fixing KRAFT PAPER for full width of seating of deck slab and including cost and conveyance to work site, labour charges for fixing the same in the correct position and all other incidental charges et., complete as per MORT&H Vth Revision 2600

Vibrated Reinforced Cement Concrete of grade M30 Design Mix using ISS size HBG graded metal including cost and conveyance of all materials to site including cost of cement at site including cost of formwork, soft water, labour charges for mixing, transporting, laying and curing concrete , working at depths , tools and plants including all other incidental charges etc; complete as per relevant standard specifications, for DECK SLAB, Kerbs and Footpath as per MORT&H Vth Revision 1000, 1500, 1700, 2200

Providing FILTER MEDIA behind Abutment and return walls for 600mm thickness using filter material as per appendix 6 of IRC:78-2014 wellpacked with smaller size towards the soil and bigger size towards the wall including cost and conveyance to work site including all labours and other incidental charges,etc complete as per Cl.710.1.4 & Appendix-6 of IRC:78-2014.

Filling behind Abutments and Return walls as per Appendix 6 of IRC:78-2014 with filling material having Ø value more than 35° free from cohesion, including cost and conveyance to worksite, laying, handling charges and filling in layers tamping under optimum moisture content to get the maximum density, including watering, with all leads and lifts for water and all other incidental charges, etc., complete as per Cl.710.1.4 & Appendix-6 of IC:78-2014.

Providing and fixing PVC EXPANSION JOINT in between deck slabs over abutment and pier as shown in the drawing including cost and conveyence of expansion joints including shalimar pad and joint sealent etc, complete as per MORT&H Vth Revision 2600

Supply and fabrication of Fe-500 D grade steel required for all RCC items of works involved in the schedule, including cost of steel at site and cost of fabrication labour charges for cleaning the rods straightening, cutting, bending, tying grills, including over lapping to the required length wherever necessary and providing to the reinforcement placing the reinforcement in position as specified in the drawings including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges, etc.,complete as per Section 1600 of MORT&H Specifications (Fifth Revision)

Vibrated Plain Cement Concrete of grade M15 ( Nominal mix 1:2:4) using 40mm ISS HBG metal, including cost and conveyance of all materials to site and cost of cement at site, including all labour charges for mixing concrete ,laying,hire charges for Tools and plants, compacting,curing with leads for soft water, including all other incidental charges, form work etc., complete for BASE COURSE BELOW APPROACH SLAB as per Sections 1000, 1500, 1700 & 2074 of MORT&H Specifications (Fifth Revision).

Vibrated reinforced cement concrete M30 (Design mix) using 20 mm ISS HBG graded metal, including cost and conveyance of all materials to site and cost of cement at site but excluding cost and fabrication of steel including cost of formwork,labour charges mixing, transporting, laying,curing concrete,working at heights ,hire charges for tools and plants including all other incidental charges, etc., complete for APPROACH SLAB as per Sections 1000, 1500, 1700 & 2704 of MORT&H Specifications (Fifth Revision).

Vibrated Cement Concrete of grade M30 (Design mix) 75mm uniform thick with surface reinforcement conforming to Sections 2702.2 of MORT&(H) Fifth revision, using ISS HBG graded metal,including cost and conveyance of all materials to work site including cement at site, including all labour charges for mixing concrete, laying, hire charges for Tools and Plants, compacting, curing with all leads for potable water, including all other incidental charges formwork, etc, complete for WEARING COAT OVER DECK SLAB AND APPROACH SLAB as per Section 2702.2 of MORT&H specifications (Fifth Revision).

Vibrated reinforced cement concrete M40 (Design mix) using 20 mm ISS HBG graded metal including cost and conveyance of all materials to siteand cost of cement at site but excluding cost and fabrication of steel but including cost of formwork,labour charges for mixing, transporting, laying,curing concrete,working at heights ,potable water,hire charges for tools and plants including all other incidental charges, etc., complete for CRASH BARRIER OVER DECK SLAB as per Sections 811,1700 & 2703.3 of MORT&H Specifications (Fifth Revision).

Vibrated Cement Concrete M20 grade, Nominal Mix using 40mm ISS size hard granite broken metal including cost and conveyance of all materials to site and cement at site including labour charges for mixing, transporting, laying, and curing concrete, working at heights, hire charges for tools and plants, including all other incidental charges,etc.,complete as per standard specification for CC PARAPETS OVER WINGS as per Sections 1000, 1500 & 1700, 2300 of MORT&H Specifications (Fifth Revision).

Providing and fixing of G.I. Drainage spouts 100mm dia as per GOI drawing SD/205 with grating arrangements at top as shown in the drawing and 100mm dia drainage spout projecting atleast 300mm beyond the bottom of deck slab as shown in the drawing including cost and conveyance of Galvanised Iron pipes and flats and fixing them in position, etc.,complete as per Section 2705 of MORT&H Specifications (Fifth Revision).

Supply and fixing of High quality of PVC Duct pipes of 160 mm dia 4 Kg/cm2 including cost and conveyance of pipes to the sie and fixing in position to proper grade and level, including labour charges for fixing and including all other incidental charges complete for providing utility services in footpaths/crash barrier as per Section 2706 of MORT&H Specifications (Fifth Revision).

CONSRUCTION OF BOX CULVERT

Earthwork excavation in all classes of soil except hard rock requiring blasting and depositing on bank with all leads and lifts as per SS20B, including cost of all labour, equipments and all incidental charges such as baling out water, providing and maintaining necessary cofferdams, sheeting, shoring bracing and their subsequent removal, removal of all logs, stumps, grubs and other deleterious matter and obstructions, trimming bottom of excavation backfilling, and clearing the site and disposal of all surplus materials etc., complete as per relevant standard specification for FOUNDATIO OF BOX CULVERT as per MOR&H Vth specification No.304

Plain Cement Concrete M-15 Grade, Nominal Mix, 1:2:4, using 40mm ISS HBG metal including cost and conveyance of all materials to site including cost of form work, lead for soft water, labour charges for mixing , transporting, laying, and curing concrete working in depths and hire charges for tools and plants, and all other incidental charges etc complete as per relevant specification for Leveling course for Box culvert as per MOR&H Vth specification No.1000, 1500, 1700, 2200

Vibrated Cement Concrete M25 design mix using 20mm ISS size HBG graded metal including cost and conveyance of all materials to worksite including cost of cement at site including soft water, labour charges for mixing transporting, laying and curing concrete, etc., complete as per relevant standard specification for Base Slab, Cover Slab and Side walls excluding Cost of Steel for culvert as per MOR&H Vth specification No.1000, 1500, 1700, 2200, 2300

Providing and fixing PVC seepage pipes of 100mm dia of required lengths for abutments and wings including costs and conveyance of all materials to work site and labour charges for fixing, etc. complete to drain the backfill in between abutment and wings as per MOR&H Vth specification No.2707

Providing and fixing of G.I drainage spouts 100mm dia as per MOST drawing SD/205 with grating arrangements at top as shown in the drawing and 100mm dia drainage spout projecting at least 600mm beyond the bottom of Deck slab as shown in the drawing including cost and conveyance of Galvanized iron pipes and flats and fixing them in position etc, complete as per MOR&H Vth specification No.2705

Supply and fabrication of Fe-500 D grade steel required for all RCC items of works involved in the schedule, including cost of steel at site and cost of fabrication labour charges for cleaning the rods straightening, cutting, bending, tying grills, including over lapping to the required length wherever necessary and providing to the reinforcement placing the reinforcement in position as specified in the drawings including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges, etc.,complete as per Section 1600 of MORT&H Specifications (Fifth Revision)

Vibrated Cement Concrete M30 design mix using ISS size HBG graded metal including cost and conveyance of all materials to worksite including cost of cement at site including all labour charges for fixing concrete, laying, vibrating, hire charges for tools and plants, compacting, curing with all leads for soft water, including all other incidental charges, form work, cost of pre moulded expansion joints and fixing the same in position etc., complete for wearing coat of 75mm uniform thickness over Top slab of Box culvert as per MOR&H Vth specification No.2702

Vibrated Reniforced Cement concrete M40 Design mix using Graded hard granite machine broken stone including cost and conveyance of all materials including cement including all labour charges for mixing concrete laying, vibrating, hire charges for tools and plants compacting, curing with all leads for soft water, cost of premoulded expansion joints and fixing the same in position including all other incidental charges etc., crash barrier over Top Slab of box culvert excluding Cost of Steel and form work with labour charges etc., as per Sections 811,1700 & 2703.3 of MORT&H Specifications (Fifth Revision).

Earth work excavation in all classes of soil except hard rock not requiring blasting and depositing on bank with all leads and all lifts as per SS20B including cost of labour, equipments and all other incidental charges such as bailing out water, providing necessary coffer dam sheeting, shoring, bracing and their subsequent removal, removal of all logs, stumps and other deleterious matter and obstruction trimming bottom of excavation, backfilling and clearing the site and disposal of all surplus earth with all leads etc,. complete as per standard specification for Training the Channel as per MOR&H Vth specification No.304

FORMATION OF APPROACH ROAD

Clearing Light jungle by cutting, removing and disposing of all materials such as bushes, shrubs, stumps, roots, grass, weeds, top organic soil not exceeding 150mm in thickness rubbish including cutting of trees upto 150mm girth

Carted Earth (Providing and Laying Carted Earth with an average lead of 5.00Km including cost and conveyance of gravel to worksite including labour charges for filling in layers as specified by the departmental officers including watering with all leads for water including labour charges for compacting using power roller, tamping, ramming under optimum moisture content to obtain the maximum density including hire and fuel charges for water sprinkler, power roller and all other incidental charges et. complete as per standard specification - 97% as per MORT&H No.305 (vth rev)

Carted Earth (Providing and Laying Carted Earth with an average lead of 1.00Km including cost and conveyance of gravel to worksite including labour charges for filling in layers as specified by the departmental officers including watering with all leads for water including labour charges for compacting using power roller, tamping, ramming under optimum moisture content to obtain the maximum density including hire and fuel charges for water sprinkler, power roller and all other incidental charges et. complete as per standard specification - 95% as per MORT&H No.305 (vth rev)

Granular Sub Base with graded material (Table :- 400-1)Plant Mix Method (Construction of granular sub base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401) - for grading -V Material

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250mm thick in two layers of 125mm each specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed material by tipper to the site laying in uniform layers with pavers in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5

Providing and laying of prime coat over WMM surface using 7 kg of Emulsion Bitumen (SS1) per 10 sqm for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc, complete as per clause 502 of MORTH Rev.5

Providing and laying Tack Coat over WMM surface (treated with primer) using 2.50Kg of Bitumen Emulsion(RS1) per 10sqm for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per Clause 503 of MORTH Rev-5.

Providing and laying 75mm consolidated thick Dense Bituminous Macadam using 0.40 cum of 37.50-13.20mm,0..35 cum of 13.20-2.36mm and 0.36 cum of 2.36mm & below and with 71.30 Kgs of VG30/VG40 bitumen for premixing per 10 sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to work site, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sections and compacted by Vibratory/Pneumatic Roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, paver finisher, vibratory / pneumatic rollers and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 505 MORTH Rev-5.

Providing and laying Bituminous Concrete to 30mm thick using 0.13cum of 19.00-9.50mm, 0.17cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 50.30kgs of VG30 bitumen for premixing per 10 sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30ton capacity, conveying the mix by tipper trucks to work site, spreading the mix to uniform thickness of 30mm with mechanical paver finisher to the specified grades and cross sections and consolidatedby8-10tonne Vibratory/ Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher/9m paver finisher, Vibratory/Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5.

CONSTRUCTION OF RCC RETAINING WALL

Earthwork excavation in all classes of soils except hard rock requiring blasting and depositing on bank with all leads and lifts as per SS20B including cost of all labour, materials, tools, equipments and all incidental charges and sheeting, shoring and bracing and their subsequent removal of all logs, stumps and other deleterious matter and obstructions, trimming of bottom of excavation back filing, clearing up the site and disposal of all surplus materials etc., complete for Foundation of RCC Retaining Walls as per MORT&H No.304

Vibrated Cement concrete M15 (Nominal mix ) 1:2:4 using 40mm ISS HBG graded metal including cost and conveyance of all materials to site and cost of cement at site including cost of form work, soft water, labour charges for mixing, transporting, laying and curing concrete working at heights, Tools and Plants and incidental charges etc; complete as per relevant standard specification, for Leveling course for Base course below body wall as per MORT&H No.1000, 1500, 1700, 2200

Vibrated reinforced cement concrete M35 grade Design Mix, using 20mm ISS size hard broken granite graded metal including cost and conveyance of all materials to site and cost of cement at site excluding cost and fabrication of steel but including form work and centering, soft water, labour charges for mixing, transporting, placing in position, vibrating and compacting finishing and curing concrete, working at heights/depths hire charges for tools and plants, including all other incidental charges, etc., complete as per standard specifications for FOOTING OF RCC RETAINING WALL as per MOR&H Vth specification No.1000, 1500, 1700, 2200

Vibrated Reinforced Cement Concrete of grade M35 Design mix using 20mm ISS size HBG graded metal, including cost and conveyance of all materials to site and cost of cement at site but excluding cost and fabrication of steel, but, including cost of form wok and centering, soft water all labour charges for mixing, transporting and placing in position, laying, vibrating, compacting, finishing concrete, curing concrete, working at depth, hire charges for tools and plants, including all other incidental charges, etc., complete for STEM OF RCC RETAINING WALL as per MOR&H Vth specification No.1000, 1500, 1700, 2200

Providing and fixing seepage pipes of 110mm dia class.I PVC pipes of required lengths for abutments and wings including cost and conveyance of all materials to work site, cost and labour for 900mm dia. semi-spherical back fill arrangements with 100mm size broken granite chips at the periphery and labour charges for fixing, etc., to drain of the backfill in Retaining Wall as per MOR&H Vth specification No.2706

Supply and fabrication of Fe-500 D grade steel required for all RCC items of works involved in the schedule, including cost of steel at site and cost of fabrication labour charges for cleaning the rods straightening, cutting, bending, tying grills, including over lapping to the required length wherever necessary and providing to the reinforcement placing the reinforcement in position as specified in the drawings including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges, etc.,complete as per Section 1600 of MORT&H Specifications (Fifth Revision)

Vibrated Cement Concrete M15 using 40mm ISS HBG metal including cost and conveyance of all materials to site and cost of cement at site, including cost of formwork, labour charges for mixing, transporting, laying, curing concrete, Working at heights, soft water, hire charges for tools and Plants, including all other incidental charges, etc., complete for Broken Parapet as per MORT&H Vth Revision 1000, 1500, 1700, 2100

CONSTRUCTION OF PCC RETAINING WALL

Earth work excavation in all classes of soils except hard rock requiring blasting and depositing on bank with all leads and lifts as per SS 20 B including cost of all labour materials, tools equipments and all incidental charges and sheeting, shoring and bracing and their subsequent removal of all logs, stumps and other deleterious matter and obstructions, trimming of bottom of excavation back filling, clearing up the site and disposal of all surplus materials etc., complete as per standard specification for FOUNDATION OF RETAINING WALL. as per MORT&H Vth Revision 304

Vibrated Cement Concrete M20 (1:1.5:3) using 40mm ISS HBG metal including cost and conveyance of all materials to site and cost of cement at site, including cost of formwork, labour charges for mixing, transporting, laying, curing concrete, Working at heights, soft water, hire charges for tools and Plants, including all other incidental charges, etc., complete for FOOTINGS OF RETAINING WALL as per MORT&H Vth Revision 1000, 1500, 1700, 2100

Vibrated Cement Concrete M20 (1:1.5:3) using 40mm ISS HBG metal including cost and conveyance of all materials to site and cost of cement at site, including cost of formwork, labour charges for mixing, transporting, laying, curing concrete, Working at heights, soft water, hire charges for tools and Plants, including all other incidental charges, etc., complete for STEM OF RETAINING WALL as per MORT&H Vth Revision 1000, 1500, 1700, 2100

Providing and fixing 110mm dia PVC SEEPAGE PIPES of required length for abutment and returns including cost and conveyance of all materials to worksite, cost and labour for semisperical backfill arrangements with 100mm size broken granite stones at the periphery and labour charges for fixing etc., to drain of the backfill as per MORT&H Vth Revision 2700

Vibrated Cement Concrete M20 (1:1.5:3) using 40mm ISS HBG metal including cost and conveyance of all materials to site and cost of cement at site, including cost of formwork, labour charges for mixing, transporting, laying, curing concrete, Working at heights, soft water, hire charges for tools and Plants, including all other incidental charges, etc., complete for Broken Parapet as per MORT&H Vth Revision 1000, 1500, 1700, 2100

DISMANTLING OF EXISTING CAUSEWAY AND MINOR BRIDGE

Dismantling Submerged Vented Causeway and Minor Bridge: Dismantling the existing PCC causeway and removal and disposing of resulting materials and back filling the resulting trenches and pits etc. from the dismanatled plain cement concrete in carriageway as per MOR&H Vth specification No.202

Dismantling apron of Submerged Vented Causeway: Dismantling, salvaging, and removal and disposing of resulting materials and back filling the resulting trenches and pits etc. for Dismanatling R R Masonry in apron as per MOR&H Vth specification No.202

Dismantaling of RCC vent slab and Minor Bridge, and removal and disposing of resulting materials and backfilling the resulting trenches and pits etc. from Dismantaling vent slab and Minor Bridge as per MOR&H Vth specification No.202

DIVERSION ROAD

Clearing Light jungle by cutting, removing and disposing of all materials such as bushes, shrubs, stumps, roots, grass, weeds, top organic soil not exceeding 150mm in thickness rubbish including cutting of trees upto 150mm girth

Carted Earth (Providing and Laying Carted Earth with an average lead of 1.00Km including cost and conveyance of gravel to worksite including labour charges for filling in layers as specified by the departmental officers including watering with all leads for water including labour charges for compacting using power roller, tamping, ramming under optimum moisture content to obtain the maximum density including hire and fuel charges for water sprinkler, power roller and all other incidental charges et. complete as per standard specification - 95% as per MORT&H No.305 (vth rev)

Granular Sub Base with graded material (Table :- 400-1)Plant Mix Method (Construction of granular sub base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401) - for grading -V Material

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250mm thick in two layers of 125mm each specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed material by tipper to the site laying in uniform layers with pavers in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5

Supplying fixing and hoisting of NP3 Class 1000mm inner dia R.C.C Pipes to suit the respective diametre of pipes confirming to IS Specifications 458 to various diametre of pipes including cost of Pipes inclusive of all taxes, loading, unloading conveyance and delivery at road site as directed by the departmental officers, including all other incidental charges etc, complete for as per MORT&H Vth Revision 2900

Sub Total Bid Price (in figures)

GST @ 12% of above all Schedules (in figures)

M RAJKUMAR