REPAIR/MAINT/REPLACEMENT OF PAINTING OF SECURITY LIGHT POLES AND JUNCTION BOXES WITH ALLIED WORKS AT 24 ED (AF) STN MANAURI

Amount

Excavation in trenches soft/loose soil not exceeding 1.5 mtr wide n not exceeding 1.5mtr in depth for laying of cable,foundation etc or for shaft well, cesspits, manholes, pirehole etc not exc 10sqm on plan and not exceeding 1.5mtr in depth and getting out complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed.

Removing excavated material not exceeding 50 Mts and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed.

Supply & filling of sand cushioning (dry sand) free from impurities or vegetable grass in under ground cables for cable protection in layer of 8 cm deep before laying of cable and 15 cm depth after laying the cable, complete all as specified and directed. (NOTE : Punned thickness of sand layers shall be measured and paid .)

M&L sub class 'B' bricks old size well burnt, laid dry flat in trenches for protection of cable over LT/HT cable complete all as specified and directed.

Labour for boring under road/drain/PCC path by manual method for inserting the 40/50mm dia light grade GI tubing for cable protection complete all as specified and directed.

Supply and fixing in replacement 50mm dia GI tubing (light grade) fitting fixed on each pole, with suitable size MS clamp 4 mm thick 15 cm width, two nos nut and bolts holding the steel tubular pole with painting of MS strip clamp complete all as specified and directed.

M&L for cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) in coping, roof, kerbs or mud stops rounded or chamfered on edge complete all as specified and directed.

Supply,erecting and fixing pole with cast aluminium heavy duty designer leg and broader designer pole, base finished with polyurethane paint (with prior treatment) diameter of one leg is approx 76mm, outer dia for spigot entry 60 mm, 03 Nos "T"shaped bolt with nuts washers provided for concrete foundation,total length of the pole including base and legs (base with plate x 3 Nos legs) is 2463 mm (8 feet 1 inches) including taking down old pole complete all as specified and directed by Engr-in-Charge. Note : Earth work, cement concrete will be measured and paid separetely.

Supply,erecting and fixing pole with cast aluminium EXTRA heavy duty designer leg and broader designer pole, base finished with polyurethane paint (with prior treatment)diameter of one leg is approx 88mm,outer dia for spigot entry 75 mm,03 Nos "T"shaped bolt with nuts washers provided for concrete foundation,total length of the pole including base and legs (base with plate x 4 Nos legs) is 3000 mm (9 feet 8 inches) including taking down old pole complete all as specified and directed by Engr-in-Charge. Note : Earth work, cement concrete will be measured and paid separetely.

Supply and fixing in replacement cast aluminium designer pole bracket fully cast aluminium finished with polyurethane paint (with prior treatment) with square junction with max projection breath of 625 mm ,suitable for two numbers post top lanterns for 2.5 meter and 3 meter poles complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement cast aluminium designer pole bracket fully cast aluminium finished with polyurethane paint (with prior treatment)with square junction with max projection breath of 1155 mm ,suitable for two numbers post top lanterns for 3 meter poles complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement led post lantern 25watt fully cast aluminium body finished with polyurethane paint (with prior treatment)with acrylic window cover ,total length of fitting 558mm (22 inches)max breath of fitting 266mm,spigot entry 78mm complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement led post lantern 40 watt fully cast aluminium body finished with polyurethane paint (with prior treatment)with acrylic window cover ,total length of fitting 752mm (30 inches)max breath of fitting 431 mm ,spigot entry 78mm complete all as specified and directed by Engr-in-Charge.

Supply, laying, jointing, testing & commissioning in trenches/ fixing with pole/ connecting, thembling, glanding of XLPE insulated under ground screened PVC bedded, galvanised steel strip or wire armored, electric power cable (Heavy duty) 1100 volts grade with stranded aluminum conductor of size 25 Sqmm 4 core (earthed) including cutting, providing aluminium lugs suitable size and cable glands and nut bolts etc with electrical connection in terminal box and including taking out old unserviceable cable complete all as specified and directed.

Supply, laying, jointing, testing & commissioning in trenches/ fixing with pole/ connecting, thembling, glanding of XLPE insulated under ground screened PVC bedded, galvanised steel strip or wire armored, electric power cable (Heavy duty) 1100 volts grade with stranded aluminum conductor of size 10 Sqmm 2 core (earthed) including cutting, providing aluminium lugs suitable size and cable glands and nut bolts etc with electrical connection in terminal box and including taking out old unserviceable cable complete all as specified and directed. (NOTE for item No. 15 & 16: Excavation & earth work, sand cushioning, brick protection shall be measured and paid under respective items.)

S&F in replacement of energy saving & environment friendly LED Street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specifed and directed.

Supply fixing in replacement of energy saving & environment friendly LED Flood light fitting 120 Watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP 65/66 protection, with impact and corrosion resistant for replacing from High mast tower / pole in any length/ specification ,required nut bolt washer etc including making electric connection using three core copper flexible cable drawn through in PVC flexible conduit complete all as specified and directed. Note ; Quoted rate shall be inclusive cost to take down/ up, replacing of inter connection cable etc and other required site work.

Supply and fixing in replacement of three core copper flexible wire, PVC insulated and PVC sheathed 1.5 Sqmm size from street light fitting to terminal box length electric connection through suitable size lugs (in the steel tubular pole making two hole one near terminal box and one near street light fitting, hole size 5.0 Sqmm, making of hole drilling method and wire connection through inner side of pole) including commissioning and testing and also taking down the old flexible wire from overhead conductor to fitting.

M & L for applying two coat of superior quality aluminum paint on all exposed surface on PCC LT poles, steel tubular LT poles including all associated fitting after necessary surface preparation of old painted surface including painting and applying two coat of synthetic enamel paint in alternate blue and white strips of 30 cm each upto 1.5 mtr height from top of coping and writing the number with paint complete all as specified and as directed by Engineer in charge.

PITAMBARI TRADERS (BID ID -3115492)

Ajanta Motor Store (BID ID -3116177)

M/s A.K Construction (BID ID -3126052)

M/S Garg Sons (BID ID -3116142)