MISC REPAIR WORKS TO CHAIN LINK FENCING COMPOUND WALL RCC COVER SLABS GATES FOOT PATHS AND DRAIN UNDER AGE BR I CHANDIPUR

Amount

PART-I (DRAINAGE) Demolition of brick work or stone boulder masonry built in cement or cement lime mortar

M&L for brick work with sub class B bricks old size straight or curved on plan exc 6m mean radius in cement mortar 1:6

M&L for brick work except bricks old size straight or curved on plan exc 6m mean radius in cement mortar 1:6

Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15cm thickness (Below or above Ground level) as in surface channel, coping etc.

M&L for Cement concrete B2 1:2:4 (40mm graded aggregate) in surface channels and drains

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped

Providing Cement concrete type D2 1:4:8 (40mm graded aggregate) as foundations, filling and mass concrete

Taking down cement plaster any description and the like on brick or stone walls, etc including raking out joints,hacking for key, scrubbing down with water etc.

M&L for 15mm thick in CM 1:4 rendering on brick or concrete surfaces finished even & smooth on wall as sppecified & directed

M&L for PCC type B1 1:2:4 (20mm graded aggregate) as in coping kneelers, apex stones, bed plates, kerbs as directed

Demolition of cement concrete (Reinforced) in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work

M&L for Providing precast cement concrete Type B1 1:2:4 using 20mm graded stone aggregate as in cover slabs set in cement mortar 1:4

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

PART-II (PATH/ CULVERT) Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15cm thickness (Below or above Ground level)

Demolitio of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in cement motar

M&L for 15mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6

M&L for 25mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded aggregate to receive tiles.

M&L for heavy duty pre-polished pavement tiles of size (300 X 300) as in footpath over 15MM thick screed in CM 1:6, set & jointed includung filling joint with white/coloured cement to match complete all as specified & directed .

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm/ 30cm x 30cm x 25mm thick, pre-polished set, jointed and pointed in neat cement slurry with grey/colour cement and pigment in floors

M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement & pigment

M&L 25mm thick Sand filling under precast concrete inter locking paver floors or in foundations including watering and consolidation

M&L 75 thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) laying as in Sub base as directed

Demolition of brick work or stone boulder masonry built in cement or cement lime mortar

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4

M&L for 15mm thick in CM 1:4 rendering on brick or concrete surfaces finished even and smooth on wall as specified & directed

Preparation of old painted surfaces and applying one coat synthetic enamel paint of Concrete/plastered Surfaces of any description over 10cm girth or width, not otherwise described

Preparation of new or previously untreated surfaces and applying two coat synthetic enamel paint over priming paints plaster coat on Concrete/plastered Surfaces of any description over 10cm girth or width, not otherwise described

PART-III (COMPOUND WALL, FENCING INCL RCC JALLI) Demolition of brickwork or stone boulder masonry built in cement or cement lime mortar

Demolition of cement concrete (Reinforced) in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work

M&L for brick work with sub class B bricks old size straight or curved on plan exc 6m mean radius in cement mortar 1:6

M&L for brick work except bricks old size straight or curved on plan exc 6m mean radius in cement mortar 1:6

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports,overhangs, etc. also splays between floors and beams, etcForm work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar works not exceeding 200mm thick rough finished

M&L mild steel TMT bar 10 mm dia and over cut to length bent to shape includingbbending & binding with MS wire (annealed) not less than 0.90 mm dia complete all as specified and directed

All as per item No 33 but 6 to 8 mm dia bar.

M&L for reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.

Taking down cement plaster any description and the like on brick or stone walls, etc including raking out joints,hacking for key, scrubbing down with water etc.

M&L for 15mm thick in CM 1:4 rendering on fair faces of brick or concrete surfaces finished even and smooth on wall

M&L for prepartion of newly plastered surfaces and applying two coats of cement based paint over a coat of primer on wall

M&L for Providing precast cement concrete Type C1 1:3:6 (12.5 mm graded aggregate louvres and jallies, 25mm thick (measured solid), set in cement mortar 1:4 including all mouldings but excluding frame

Dismantling structural steel work including doors, gates but excluding framed truss etc

Preparation of new or previously untreated surfaces of steel and applying two coat synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description over 10cm girth or width, not otherwise described

S&F for framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

RANA ENTERPRISES

DS ENTERPRISES

FRIENDS CONSTRUCTION

R.B.Construction

Ajay Associates

M/S DK MUKHERJEE CO

M/S T.N.CONSTRUCTION