Peripherial lighting line erection at Southern Boundary, Pit Office, Haul Road at BKB workshop and CHP Site and installation of 3 nos Lighting Transformers at different locations under AKKOCP, BnK Area

Amount

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required;Above 10.00 metre and upto 12.00;metre;Peripheral of mines - 16 SP + 1 DP Structure;CRE- 1 DP structure + 1 SP;Main Sump - 1 DP structure + 1 SP;CHP lighting - 5 SP;PIT Office- 5 SP;BKB Workshop- 5

Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required.;(40*2*0.214*23)+(40*3*0.214*10)

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .

Erection of angle iron/ channel iron cross arm on wood/ RCC/ PCC/ steel tubular/ rail pole etc. as required.

Supplying and erection of 100 mm X 110 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required .

Supplying and erection of 100 mm X 80 mm pin insulator complete with G. I. Spindle and nuts etc. as required.

Loanding/Unloading and transportation of Dismentalled pole from old sites to new sites

Erection of light fitting at new location and repalcement of exisiting faulty lights at poles under AKKOCP

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required

Loading, shifting and unloading and placing of 100 KVA 3.3 KV/440 Transformers

Supplying and erection of a set of cross bracing FRame work for 11 KV over head line double pole structure having four members fabricated out of 50 mm X 50 mm X 6 mm angle iron to form a rectangle of minimum size 1400 mm width X 2500 mm height, complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts and nuts etc (as per drawing) and painting with primer and finish paint as required.

Supplying and erection of stay set complete (galvanized) with 19/20 mm dia x 1.8 mtrs long stay rod, anchor plate of size 45 cm x 45 cm x 7.5 mm, thimble, stay clamps, bow tightened, 7/3.15 mm dia G.I stay wire and stain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.;2 X 2.5 Sq mm for PIT Office

Supplying and fixing of G. I. nuts and through bolts with washer

Supplying and drawing following sizes of FRLS PVC insulated aluminium conductor, single core cable in the existing surface/ reces - 10 Sq mm 2 core

Providing and fixing 100 Amp capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cu+B914:B921bicle panel, making connections, etc as required.

Total impact of GST for the purpose of CTC

M/S JAI MAA ENTERPRISES

S KUMAR ENTERPRISES