Estimate for Repair and Renovation of Cross Regulator of Sirhind Feeder and Head Regulator of Mudki Distributary with Associated Lining Patch Repairs at RD 102613 of Sirhind Feeder

Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m.

Filling empty cement Bags with good earth & laying in position in wet conditions including supply & carriage of E.C. Bags & good earth and cost of material such as string, etc complete in all respect as per drawing, design, specifications and as per instructions of Engineer in charge .

Excavation of Soil using Hyraulic Excavator and hydraulic Tractor Trolly I/C cutting and loading in Trolly and transporting to the embankment locations with all lifts and 3 km leads (for construction of cross bundh)

Excavation of soil using hydraulic excavator and hydraulic tractor trolley including cutting and loading in trolley and transporting to the embankment location with all lifts and leads including cost of earth complete in all respect, but excluding royality.

Providing 210 no. pokelain machine for removing existing EC bags filled with concrete

Making dewatering arrangement by pumping set 4''x 4'' (Tractor driven)

Making dewatering arrangements inclusive of running, operation and maintenance of equipment to provide dry condition at working place for lining, longitudinal /transverse drain etc & provision of digging & filling of drains for disposal of water as per the instructions of the Engineer incharge. The rate shall be inclusive of filter material, if required, to be provided to prevent fine particles in the adjacent ground to be carried away by flowing water and to prevent clogging of the system.

Compaction of earthwork in 20 cm layers & dressing including cost watering, rolling as per specifications

Earth work for lip cutting for lining of irrigation channels inclusive of all allowances, lead and dressing (0 to 1.5 m depth)

Earth work for lip cutting for lining of irrigation channels inclusive of all allowances, lead and dressing (depth exceeding 1.5 m but upto 3.0 m)

Earth work for lip cutting for lining of irrigation channels inclusive of all allowances, lead and dressing (depth exceeding 3.0 m but upto 4.5 m)

Earth work for lip cutting for lining of irrigation channels inclusive of all allowances, lead and dressing (depth exceeding 4.5 m but upto 6.0 m)

Cement concrete 1:2:4 With stone ballast or shinglec mixing by mechanical means using concrete mixer volumetric type

First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level. (for repair of toe wall)

Dressing of side slopes and preparation of sub grade for lining.

115 mm thick brick on edge lining in herring bone bond/zig-zag or other specified pattern in 1:3 cement sand mortar over 10 mm thick cement plaster 1:3 over 12.50 mm thick cement plaster in 1:5 on sub grade. (for side slope)

Cement pointing 1:2 deep variety

Laying brick on edge coping 550 mm wide and 115mm thick in cement sand mortar 1:3

Rehandling of Earth work with average lead 15 metres complete in all respect, as per instructions of the Engineer incharge.

Dressing of earth work (New work)

Extra for dressing of dowels along water carrying channel in addition to payment for dressed earth work.complete in all respect, as per drawings, design, specifications & the instructions of the Engineer incharge.

Scraping brushing to remove paint to base metal surface

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Painting two or more coats with anticorrosive bitumastic Paint to give an even shade

Removing damaged old rubber seal bulb or flat including clamp plate of all sizes & types

Providing of hollow bulb seal (size 120/44) & fixing in position including preparation of surface complete in all respects and to entire satisfaction of engineer in charge

Providing & fixing in position of flat/wedge seal size (75mm dia x 12 mm thick) including preparation of surface complete all respects and to entire satisfaction of engineer in charge

Supply, Providing and fixing of Stainless steel Bolts & nuts (for seals of all types) with washer of all sizes and length required as per sample / drawing / direction of Engineer-In charge complete in all respects.

Supply of multi grade mobile oil

Supply of multipurpose synthetic Hetic Grease

Providing LED light of standard reputed company with minimum 2 year warranty

Miscellanneous minor repairs of item such as MS flat, ISA, ISMC,ISMB etc. tp make gates operational including labour charges.

Providing & fixing clamp plat, complete in all respects size 75x10 mm size

Fixing and Holding the gate with the help of 3 tonne capacity crane

Excavation of Soil using Hyraulic Excavator and hydraulic Tractor Trolly I/C cutting and loading in Trollyand transporting to the embankment locations with all lifts & 450 m lead (for removal of cross bundh)

Please Enable Macros to View BoQ information