REPAIR/ MAINT OF INTERNAL WIRING, LED LIFGT FITTINGS WITH OTHER ALLIED WORKS IN TECH AREA AT 24 ED UNDER AGE (I) AF MANAURI

Amount

Taking down carefully point wiring (light, fan, socket or power) complete with fitting such as switches, ceiling roses, lamp holder, sockets, fan regulators, Sketch light fittings wooden terminal box plastic laminated sheet cover from TW battens including TW batten or drawing from existing conduit non-metallic removing including TW batten all as specified and as directed by Engr-in-Charge

M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade FRLS PVC cable IS:694 with multi stranded copper conductor of size 1.5 sqmm (Nominal area) drawn through and including rigid PVC conduit/ metelic conduit ISI marked not less than 20 mm dia with all PVC conduit fittings such as Tees, elbows, bend, reducers etc, concealed conduit wiring fixed on wall/ on ceiling with GI saddles, GI screws, rowel plugs (surface conduit wiring) with all fittings including tee, junction boxes and provision of pressed steel terminal box 1.25 mm thick of suitable size with 3 mm thick plastic laminated sheet cover for mounting switch sockets and regulators and drawn continuous earth wire with and including PVC insulated unsheathed 1100 volts grade cable with multi stranded copper conductor of size 1.5 sqmm (Nominal area) connected to earth dolly complete all as specified and as directed by Engr-in-Charge for the followings:- Note :- (i) The cost of chases cutting on wall for concealing conduit, boxes, plate etc are included in the unit quoted rate. (ii) Switches, sockets, etc shall be measured and paid for separately.

(a) one light/fan/bell point controlled by one switch

(b) one 3 pin 5 amps socket out let on same board controlled by one switch

(c) one 3 pin 6 amps socket outlet on independent board controlled by one switch

(d) All as per item No 2 above but for one power point 3 pin 16 amps socket outlet on independent board with FRLS PVC insulated unsheathed 1100 volt grade cable with multi stranded copper conductor of size 2.5 sqmm (Nominal area) including provision of earth wire FRLS PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.5 sqmm (Nominal area) cable common connected to earth dolly all as specified for one 3 pin 16 amps socket outlet controlled by one switch complete all as specified and as directed by Engr-in-Charge.

M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 sqmm (Nominal area) drawn through on existing PVC/GI conduit, fixed on wall (concealed conduit wiring) and on ceiling with GI saddles, GI screws, rowel plugs (surface conduit wiring) with all fittings including tee, junction boxes and existing steel terminal box but new provision of 3 mm thick plastic laminated sheet cover for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC insulated unsheathed 1100 volts grade cable with multi stranded copper conductor of size 1.5 sqmm (Nominal area) connected to earth dolly complete all as specified and as directed by Engr-in-Charge for the followings:-

(a) one light/fan/bell point controlled by one switch

(b) one 3 pin 5 amps socket out let same board controlled by one switch

(c) one 3 pin 6 amps socket outlet on independent board controlled by one switch

(d) All as per item No 3 above but one power point 3 pin 16 amps socket outlet on independent board with FRLS PVC insulated unsheathed 1100 volt grade cable with multi stranded copper conductor of size 2.5 sqmm (Nominal area) including provision of earth wire FRLS PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 2.5 sqmm (Nominal area) cable common connected to earth dolly all as specified for one 3 pin 16 amps socket outlet controlled by one switch complete all as specified and as directed by Engr-in-Charge.

M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 sqmm (Nominal area) , laid/drawn through & including suitable size PVC casing capping with necessary fittings/ accessories fixed on walls/ ceiling by means of metalic sleeve/dash fastener with cadmium plated iron screws all as per ISI including sunk type pressed steel terminal boxes for mounting, fittings like switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet top covers concealed in walls etc and drawing continuous earth wire with and including PVC insulated unsheathed 1100 volts grade cable with multi stranded copper conductor of size 1.5 sqmm (Nominal area) connected to earth dolly complete all as specified and as directed by Engr-in-Charge for the followings:-.

(a) one light point or one fan point controlled by one switch

(b) one 3 pin 5 amps socket out let same board controlled by one switch

(c) one 3 pin 6 amps socket outlet on independent board controlled by one switch

S&F of switch piano flush type 5/6 Amps single pole one way 230/250 volts complete for one light/fan point/ 5 amp socket outlet controlled by one switch all as specified and directed by Engr-in-Charge

S&F socket outlet 3 pin, 5/6 amps flush type complete all as specified and directed by Engr-in-Charge.

S&F switch piano flush type single pole one way 16 amps complete all as specified and directed by Engr-in-charge.

S&F socket outlet 2 in 1 combination, 3 pin 6/16 amps flush type complete all as specified and directed by Engr-in-Charge

S&F Ceiling rose, surface bakelite, 60 x 25, mm two to three terminals.

S&F Stepped type electronic fan regulator make flush type and connecting up. Regulator shall be of Cat part No 14502 of Anchor / Cat part No 675530 of Legrand or equivalent model of make specified in appendix 'B' to particular specifications.

S&F lamp holder, PVC Polycarbonate batten type with back plate suitable for batten fittings

S&F in replacement of Factory made sheet metal enclosure distribution board SPN 8 way type double door 200 amp rates bus bar concealed in wall including PCC work with all connection and making good the disturbed surfaces of wall, matching with existing wall complete all as specified and directed by Engr-in-Charge.

S&F MCB, Single pole and neutral, 230 volt, 6 to 32 Amp rating 10KA, C series fixed in DBs catered herein before.

S&F MCB, SP, 230 volts, 6 to 32 Amp rating, 10 KA, C series fixed in DBs catered herein before.

M&L in replacement of unserviceable sub main wiring with two single core FRLS PVC insulated unsheathed stranded copper conductor cable confirmimg to IS-694 with copper conductor of size 4 sqmm and drawing through non rigid metallic PVC conduit (concealed in wall) incl 4.0 sqmm FRLS PVC insulated unsheathed stranded copper conductor cable as earth conductor connected to earth and earth dolly in conduit including connecting to main board including non metallic PVC conduit medium grade not less than of 25 mm dia size with all accessories as specified and directed by Engr-in-Charge. Note : Two single core copper conductor of 4 sqmm including earth wire of 4.0 sqmm including PVC conduit will be measured as single unit length

S&F in replacement LED tube light batten suitable for 16/20 watts LED tube including making connection with three core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge. Note:- Batten shall be of Make : Model No DMLN1LT8-16/20 of Crompton or equivalent model of make Philips/Wipro/Bajaj/Havells. Light fitting of other make of higher capacity may be used without any price adjustment.

S&F in replacement LED tube (lamp only) 20 watts, with min luminous efficiacy Min 100 lumens/watt, power factor 0.9(min), with extruded aluminium/PC body and PC diffuser complete with inbuilt driver complete all as specified and directed by Engineer-in -charge. Note:- Tube shall be of Make : Model No LTT8-20 of Crompton or equivalent model of make Philips/Wipro/Bajaj/Havells. Light fitting of other make of higher capacity may be used without any price adjustment.

S&F in replacement LED tube light 9/10 watts batten including suitable LED lamp with min luminous efficacy min 100 lumens/watt, power factor 0.9(min), with extruded aluminium/PC body and PC diffuser complete with inbuilt driver complete duly electric connection all as specified and directed by Engineer-in -charge. Note:- Batten shall be of Make:- Model No LCTL-9-CDL of Crompton or Luminaire type BCLSB 10 WH ( Product code-112407) of Bajaj or equivalent model of make Philips/Wipro/Havells. Light fitting of other make of higher capacity may be used without any price adjustment.

S&F in replacement LED bulb 9 watt BEE 5 star rating complete all as specified and directed by Engineer-in-charge. Make : Havells/Crompton/Bajaj/Philips/Wipro.

Disconnection and taking down of Bulk head luminaries any watt of any type and any size complete and making good of disturbed surfaces and applying two coats of distemper/whitewash of colour matching with existing surfaces complete.

S&F integrated LED Bulk head luminaire 10 watt with pressure die cast housing, acrylic diffuser and frame etc complete with all internally prewired including connecting with suitabel size PVC insulated wire from ceiling rose to luminaire complete all as specified and as directed by Engr-in-Charge. Note:- Make : LBHE-10-CDL of Crompton or Luminaire type BIBWP 10W LED of Bajaj or LHEOAOP7UZ6W010 OF Havells or equivalent model of make Philips/Wipro. Light fitting of other make of higher capacity may be used without any price adjustment. .

S&F in replacement Ultra bright LED PL-L 18 watt with very high efficacy suited for existing 2G11 lamp holders (recess mounted luminiaire) complete all as specified. Make : Cat ref- LPLLA-18-CDL of Crompton or Product Code-LHLDEJNEML8Z018 of Havells or equivalent model of make Philips/Wipro/Bajaj. Light fitting of other make of higher capacity may be used without any price adjustment.

S&F in replacement energy saving recess mounted LED luminaire 45/50 watt with high transculent diffuser etc complete with all internally prewired including inbuilt driver and connecting with suitabel size PVC insulated wire from ceiling rose to luminaire and suitable for 600mm x 600mm modular/POP/Gypsum ceiling complete all as specified and as directed by Engr-in-Charge. Note:- Make : Cat Part No LCTLRN-50-FO-CDL of Crompton or equivalent model of make Philips/Wipro/Bajaj/Havells. Light fitting of other make of higher capacity may be used without any price adjustment.

Disconnecting and taking down of high bay luminaire complete of any type and any size complete all as specified and as directed by Engineer-in-charge.

S&F advanced LED highbay luminaire 80/90 watt IP66 protection equipped with Synjet Acitve cooling technology and COB LED incl driver and liminous efficacy min 100 lm/w with optics for better uniform distribution of light complete with all internally prewired including connecting with suitabel size PVC insulated wire from ceiling rose to luminaire complete all as specified and as directed by Engr-in-Charge. Note:- Model No. LHB-90-CDL/60 of Crompton or equivalent model of make Philips/Wipro/Bajaj/Havells. Light fitting of other make of higher capacity may be used without any price adjustment.

S&F in replacement LED 45 watt street light fitting with pressure die cast aluminium housing with heat resistant toughened glass and accessories & IP65 protection and liminous efficacy min 100 lm/w including inbuilt driver and provision of three core PVC insulated PVC sheathed flexible copper cable 1.5 sqmm complete from fitting to pole/terminal box, complete all as specified and as directed by Engr-in-Charge. Note;- Make : Cat Part No LSTP-45-CDL of crompton or Luminaire type BRLEP 45W LED V2 ( Product code-169910) of Bajaj or Product code- LHETBXU7PA6J045 of Havells or equivalent model of make Philips/Wipro. Light fitting of other make of higher capacity may be used without any price adjustment.

S&F in replacement round shaped recess mounted LED luminaire 15 watt, 230v, 50Hz having die cast aluminium housing with drop down diffuser with optimized heat sink for efficient heat dissipatio and seperate replacement electronic driver complete including all accessories and making connection with suitable size PVC insulated wire from ceiling rose to luminaire suitable for ceiling cutout dia 155 mm, height 45mm complete all as specified and as directed by Engr-in-Charge. Note;-Make : Model No- LCDN-15-CDL/TL/WW of Crompton or Product code- RISED LR15W LED 840S of Havells or Luminaire type BZSLO 15W WH pro of Bajaj or equivalent model of make Philips/Wipro. Light fitting of other make of higher capacity may be used without any price adjustment.

S&F in replacement LED flood light luminaire 150 watt with pressure die-cast aluminium housing and IP65 protection and high power LED light source including inbuilt driver and making necessary connection complete all as specified. Note:- (i) Make : Product code -JETAPROP LUSFL150 WLED757 LTG of Havells or LFLN-150-CDL/60 of Crompton or Luminaire type BJFL 150W LED I WW of Bajaj or equivalent model of make Philips/Wipro. Light fitting of other make of higher capacity may be used without any price adjustment. (ii) Cable from MCB to fitting shall be included in unit rate quoted by contractor.

S&F in replacement LED flood light luminaire 100 watt with pressure die-cast aluminium housing and IP65 protection and high power LED light source including inbuilt driver and making necessary connection complete all as specified. Note:- (i) Make:- Model- -JETARISEFLS100WLED757ASYMLTG of Havells or LFLN-100-CDL/60 of Crompton or luminaire type BJFL 100W LED I of Bajaj or equivalent model of make Philips/Wipro. Light fitting of other make of higher capacity may be used without any price adjustment. (ii) Cable from MCB to fitting shall be included in unit rate quoted by contractor.

Excavating in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for wall foundation etc or for manholes etc not exceeding 10 Sqm area on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers each not exceeding 25 cm thick in soft/loose soil.

Removing excavated surplus soil to a distance not exceeding 50 metre and depositing where directed at level not exceeding 1.5 metre above the starting point.

M&L for sand cushioning (dry sand) to under ground cable for cable protection with layer of 8 cm deep before laying the cable and 15 cm depth after laying the cable, complete all as specified and as directed by Engr-in-Charge. Note : Only punned thickness of sand will be measured and paid.

M&L for brick, sub class 'B' well burnt, laid dry flat in trenches for protection of cable over LT/HT cable, complete all as specified and directed by Engr-in-Charge.

Supply and laying in replacement XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross-sectional area 16 sqmm 4 core in trenches including cutting, providing aluminium lugs suitable size and cable glands and nut bolts etc with electrical connection in terminal box and testing and commissioning complete all as specified and as directed by Engr-in-Charge.

All as per item No. 35 above but 25 sqmm 4 core.

All as per item No. 35 above but 35 sqmm 3.5 core.

Supply and fix in replacement sheet metal enclosure distribution board TPN, 4 poles ,double door, 4 way with 200 Amps rated copper bus bar vertical type with MCCB 4 pole 63 Amps 415 volt thermal magnetic base operated as incomer including concealed in surface of wall and making all connection using gland , thimbles in required size complete all as specified and directed. Make :- Legrand/ Seimens/ L&T Note:-Quoted rate shall be included cost of MCCB , cutting plastering , coloring to surface of wall to be concealed etc all site required matching with existing surface.

M&L for taking down of old meters, including electric connection and refix the same to old/new position of meter box by replacing u/s copper wire of existing size form DBs to meter box complete all as specified and as directed by Engr-in-Charge.

Repair to existing DBs/TPN in its old position by taking out all the MCBs from DBs, replacement of old burnt cable connections, tightening of connection, applying pvc insulated taps at all the naked connections and refixing the MCBs at its old position for making connections with old/new cables.

Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ. (ii) Make of material shall be as per mentioned in Particular specifications or Appendix 'B' to Particular specifications as approved by AGE (I) AF manauri

M/S AM ENTERPRISES

Bharat Trading Company

M/S R S Traders

M/S Garg Sons

M/S SATISH KUMAR