Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.4 LAccepted-AOC | ₹1.4 L | L1 | Accepted-AOC Due to lowest bidder |
| 2 | L2₹1.4 LRejected-Finance | ₹1.4 L | L2 | Rejected-Finance Rejected Due to Higher Rate |
| 3 | L3₹1.4 LRejected-Finance | ₹1.4 L | L3 | Rejected-Finance Rejected Due to Higher Rate |
Tender Value
₹1.4 L
EMD Value
₹2,743
Closing Date
29 May 2026, 2:00 pmClosed
Assistant Engineer, Burdwan Sub-Division, PWD
O/O Assistant Engineer, Burdwan Sub-Division, PWD Burdwan, PIN-713101
Renovation of Coding Room at Regional Quality Control Laboratory, Burdwan.
2026_WBPWD_5014155_1
WBPWD/AE/BSD/NIeT-02/2026-27
Open Tender
CIVIL WORKS
Percentage
Burdwan Municipality
Please refer Tender documents.
5 documents required · 5 mandatory
₹2,743
Yes
Office of the Assistant Engineer, Burdwan Sub-Divi
24 Jul 2026
18 May 2026
1 Jun 2026
18 May 2026
29 May 2026
18 May 2026
22 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (e) Sal : Malayasian | - | M3 | 75,772 | - |
| 2 | Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor. (a) 35 mm thick shutters (single leaf) | 4.1 | M2 | 2,673 | ₹10,959.3 |
| 3 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI
mark. | 8 | Each | 47 | ₹376 |
| 4 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) | 30 | Each | 29 | ₹870 |
| 5 | Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor (iv) 12mm | 23.9 | M2 | 1,709 | ₹40,845.1 |
| 6 | ii) Godrej Hydraulic door closer fitted and fixed complete. (a) Heavy type | 2 | Each | 2,064 | ₹4,128 |
| 7 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed
complete: (a) With continuous plate base (vi) 150 mm grip x 10 mm dia rod. | 4 | Each | 97 | ₹388 |
| 8 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: (x) 300mm long x 12mm dia. bolt. | 2 | Each | 155 | ₹310 |
| 9 | i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. (c) 300mm long. | 2 | Each | 166 | ₹332 |
| 10 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) (a) One Coat i) Water based interior grade Acrylic Primer | 101.66 | M2 | 30.8 | ₹3,131.13 |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 7.42 MB
2911.pdf
Tender Documents • 0.51 MB
SpecialTermsCondition.pdf
Additional Documents • 2.45 MB
BOQ_5082111.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].