PROVN OF BATHROOM AND TOILET BLOCKS AND OTHER MINOR WORKS AND REVENUE WORK IN CERTAIN AREA AT MIL STN POKARAN, KHETOLAI AND NACHANA UNDER AGE (I) POKARAN

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soil complete all as specified and directed by Engineer Incharge

Excavation in trenches n.exc 1.5m deep and n.exc 1.5m wide ,etc. n getting out any type of Soil

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering, and removing surplus soil to a distance n exc 50 m and making good surface in any type of soil

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering, and removing surplus soil to a distance n exc 50 m and making good surface in soft disintegrated Rock

Returning filling in soil including spreading, levelling and well ramming in layers n.exc 25cm thick in layer etc all complete.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point

M&L for PCC ( 1:4:8) Type D-2 using 40 mm graded aggregate as in foundation

M&L For Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire

Chain link MS galvanisd fencing, any size or type all as specified and directed by Engineer incharge

S&F for MS Bars 10mm dia round as line wire for chain link fencing, in available length all as specified and directed by Engineer incharge

Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 Type D-2 using 40mm graded stone aggregate as in sub bases all as specified.

M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) all as specified & directed by Engineer-in-charge.

Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exceeding 20mm & dressing face beds and joints as specified to squared rubble walling Jodhpur type brought up to courses all as specified & directed by Engineer-in-Charge.

M&L rendering 15mm thick in 1:6 cement plaster on stone masonary surface is to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L rendering 15mm thick in 1:4 cement plaster on of stone masonary surface is to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for 10 mm thick , plaster in cement mortar (1:4) on surfaces of ceiling and finishing the surface even and smooth without using extra cement all as specified & directed by Engineer-in-charge.

M&L preparation of new wall surface and applying two coats of distemper oil emulsion over a coat of alkali resistant primer,including one or more coat of wall care putty on wall complete all as specified and directeded.

M&L for preparation of new plastered surfaces as in ceilings, applying 3 coats of white wash complete.

M&L for preparation of plastered surfaces of wall/ untreated concrete surface and applying three coats of white wash all as specified & directed by Engineer-in- Charge.

M&L for precast RCC M-25 grade ,as in boundary piller of any size & section , using with 20mm graded stone aggrigate with plain fair faces, with ohamfered angles and flat ,splayed,rounded or mitred tops complete all as specified & dircted.

Fixing only boundry pillers in position at the any distances & location as directed including transporting & distributing the pillers at required intervals, placing pillers in true position and holding & staying same while ramming arround or concreting of pst holes etc complete all as directed

M&l for Mild steel TMT bars 10 MM dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9MM dia.

M&L for Mild steel TMT bars 5 MM dia and over upto and including 10 MM dia in stirrups, spacers and binders

M&L for writing letters or figures (Block,Roman, Italic,Indian n exc 30cm high.)

Complete preparation new surfaces of walls and preparation of surfaces (external faces) of walls and applying two coats of external weather proof paint of Apex or equivalent over a coat of primer (self coat) complete all as per manufacturers instructions, complete all as per specified and directed.

M&L for preparation of new or previously untreated concrete surfaces & applying two coats of synthetic enamal paint over coat of primer complete all specified & directed.

M&L for preparing new/previously untreated steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer

M&L for preparing new/previously untreated steel surfaces of any description n exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer

M&L for jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted, set, jointed and grouted in lime mortar 1:3 or cement mortar 1:6 complete complete all as specified and as directed by the Engineer-in-Charge

M&L for PCC 1:2:4 type BO using 12.5 mm graded stone aggregate for levelling course for consolidated thickness shall be varied from 25 to 85 mm as per the requirements all as directed by Engr-in-Charge.

M&L rendering 15mm thick in 1:4 cement plaster on roof surface by using WPC Compund and surface finished even and smooth complete all as specified and directed.

Supply only integral water proofing compound.(ISI Marked)

M&L for APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt not less than 150 gms/sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 Ltr/Sqm by forced all as specified and as directed

S&F for Non- skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with screed bed 15 mm thick CM 1:6 complete all as specified & directed

M&L Glazed ceramic coloured tiles in vertical surface 600mm x300mm , 7-8mm mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering CM1:4 complete all as specified and directed.

S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per Engr - in - charge.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suplying & fixing in the frame at site as per directed by Engr - in- charge.

S&F SS hinges, 100mm size and fixed.

S&F Aluminium anodised, barrel tower bolt of extruded section and fix of length 125mm

S&F Aluminium handles, cast type, anodised of size 150mm long.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F Factory made Box Type steel ventilators fixed type, incl with one shop coat of primer,complete as shown in Drawing No. CEJZ/TD/24 sh 1/1 to 1/3, and all as specified & directed.

S&F figured glass, pin head type & glazing with oil putty in square n exc 0.5 sqm in each pane 3 mm thick

M&L for roughly squared stone 5cm thick as in lintels n exc 3m in length, hammer dressed on face and soffits, hoisted, set and pointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge

M&L for 5cm sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4, complete complete all as specified and as directed by the Engineer-in-Charge

M&L for PCC 1:3:6 Type C2 (using 40 mm graded stone aggregate) in walls or retaining walls, any thickness size of shape including,pilasters, boundary pillars and posts (including post and bases complete all as specified and as directed.

M&L for PCC (1:3:6) seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed Note:- Reinforcement if any used in subject item shall be measured and paid seprately

M&L for 50 mm thick PCC (1:3:6) type C-1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25&3 parts of sand by weight all as specified and directed by Engr-in-charge

Supply and fix rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I ,1000 ltr capacity

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

Cutting holes in stone walls built in cement mortar or in cement lime mortarfor inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4

S&F stainless steel wire 0.36mm normal dia of wire and average width of aparture 1.40mm complete all as specified & directed by Engineer-in-charge.

S&F Medium grade GI tubing 15 mm bore with all fittings , to walls, ceiling or laid in floors etc.

S&F Medium grade GI tubing 20 mm bore with all fittings , to walls, ceiling or laid in floors etc.

S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed to 15 mm bore pipe.

S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed to 20 mm bore pipe.

S&F stop cock copper alloy but fancy type and chrominum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron/pipe or for union and fixed 15 mm bore

S&F bib taps cast cipper alloy chromoum plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F Viterious china White Wash Hand Basin fixed in repairs includign 15 mm pillar cock cast copper alloy CP, 15mm cast copper stop valve, 32 mm brase CP waste fitting, PVC waste pipe 32 mm dia & 15 mm PTMT connection pipe 450 mm long

Supply and fix in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) fixed

S& F Soap dish, any type, fixed to plugs with chromium plated brass screws

S&F towel rail 600 mm long of Brass C.P 'D' type fixed with and including chromium plated brass screws and wooden /plastic cheats

Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed to 15mm dia bore.

S&F CP Shower rose 125mm size with swivel joint including fixing sted pipe for union.

S&F for European type water closet,including plastic seat cover white, closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device complete.

S&F CP Health faucet spray with 1.5m long pipe with wall hook & fixed complete

Supply and fix Bib taps two way type , cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule 15 mm bore and fixed

S&F PVC connections 15 mm size with PTMT nuts to length 450 mm

S&F PVC flushing cistarn 10 ltrs capacity ISI marked incl PVC damtake pipe PVC 450mm inlet etc all complete .

Cutting holes in to or through in brick or stone walls built in cement mortar and making good in CM 1:3 or cement concrete 1:2:4 type B1 as required, exc 150sqcm & n exc 400 sqcm complete all as specified and directed,

PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia out let

PVC (SWR) multi floor trap with grating including jointing with solvent cement 100 mm dia out let.

S&F PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls

S&F PVC (SWR) pipes of 75 mm dia, single socket fixed to walls

S&F 100 bore of pipe stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof.

S&F PVC (SWR) bends with access door of 110 mm dia, any radius

S&F PVC(SWR) bends with access door of 75 mm dia, any radius

S&F PVC (SWR) bends of 110 mm dia, any radius

S&F PVC (SWR) bends of 75mm dia, any radius

(PVC (SWR) vent cowl, 100 mm dia

S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

S&F for MS work for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

S&F for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long

S&F MS flat iron of as in vertical and horizontal supports for tree guard

S&F for Welded steel wire fabric supplied and fixed complete to wood or steel members N exc 4 kg

S&F for Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F 6.3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqn in each pane.

M&L for 12 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

M&L for Granite(of any type) 18 to 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platfoRms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade

M&L for point wiring with PVC unsheathed cable single core stranded copper conductor 1.5 sq mm size, 1100 V grade, drawn into concealed conduit medium grade (ISI marked) not less than 20mm dia on surface with and including PVC unsheathed cable single core copper conductor 1.5 Sq mm as continuous earth wire and including pressed MS sheet sunk in box 1.12 mm thick with 2.8 mm thick laminated bakelite sheet all as specified & directed by Engr-in-charge for the following :-

(a) One light/Exhaust point controlled by one switch 5 Amp one way

(b) -Ditto- all as per item no 5.but socket outlet 3pin 5 amps same board

-Ditto- all as per item No 94 here-in-before but for one socket outlet/metal clad socket of 15 Amps fixed on independent board with 4.0 Sq mm multistranded copper conductor wire FRLS PVC insulated and 2.5 Sq mm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified and directed by Engineer-in-Charge

Supply and Fix switch piano type single pole one way 5 Amp

Supply and Fix switch piano type single pole one way 15 Amp

Supply and Fix sockets outlet 2 in 1, 3 Pin, 5 Amp

Supply and Fix sockets outlet 2 in 1, 3 Pin, 5 and 15 Amp flush type

S&F in repairs, MCB DBs sheet metal enclosures single phase and neutral 240 Volt with 200 Amps rated bus bar Double Door Type, 8 ways complete all as specified & directed

M&L MCB SP 240 volts, 5 to 32 Amps, 10 KA

M&L MCB SPN 240 volts, 40 Amps, 10 KA

M&L Lamp holder PVC polycarbonate type with back plate and LED lamp 09 watt suitable for batten fittings complete all as specified and as directed

S & F Decorative box type fitting 1x 16w, blue coloured end caps, prewired for LED tube including LED tube 16 watts, including connecting up with twin core twisted flexible copper conductor cable with suitable size complete and all as specified and directed by Engineer- in Charge.”

M & L for earthing complete with galvanized steel earth plate electrode 600x600x6.3 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4 mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'light grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continious earth wire on pole, testing the earthing after completion all as specified and shown in electric plate No 5 of MES SSR Part-I 1991 print and as directed .

M&L for submain wiring with PVC unsheathed cable single core stranded copper conductor 6 sq mm size, 1100 V grade, drawn through PVC conduit medium grade (ISI marked) not less than 25mm dia on surface with and including PVC unsheathed cable single core copper conductor 4.0 Sq mm as continuous earth wire and all as specified & directed by Engr-in-charge.

S & F LED building Security light fitting 1x18watt with polycarbonate housing ,Aluminum gear tray duly prewired inbuilt LED module IP 65 Protection complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of size 1.5 sq mm including GI tubing 40mm dia light grade 1.5m long band to shape for mounting of security light with 2 nos MS,FI clamp including plinth with nut bolts etc complete all as specified and directed

S K TRADER

S.D. And Company