Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.6 LAccepted-AOC 10 AISHWARYA 1ST FLOOR 2ND CROSS ANNAYAPPA GARDEN NEW THIPPASANDRA HAL HAL III STAGE BANGALORE 560075 | BENGALURU URBAN | KARNATAKA | 560075 | ₹14.6 L | L1 | Accepted-AOC BEING LOWEST |
| 2 | L2₹14.6 L+₹4,198 (0.29%)Rejected-AOC 4C 1 KESHAR VIHAR NEAR NSF INTER COLLEGE BALAJI PURAM SHAHGANJ AGRA 282010 | AGRA | UTTAR PRADESH | 282010 | ₹14.6 L+₹4,198 (0.29%) | L2 | Rejected-AOC BEING NOT LOWEST |
| 3 | L3₹18.8 L+₹4.2 L (28.9%)Rejected-AOC | ₹18.8 L+₹4.2 L (28.9%) | L3 | Rejected-AOC BEING NOT LOWEST |
| Sl No | Description | Qty | Unit | B5BUILDING SOLUTIONS L3 | R K SINGH AND CO L2 | VARALAKSHMI CONSTRUCTIONS L1 |
|---|---|---|---|---|---|---|
| 1.00 | Material and Labour for Preparation of joints by Taking out the existing sealant or any other compound and wherever joints are cracked in the sides by cutting using mechanical methods. Prepared joint shall have a width not exceeding 10mm and upto a depth of not exceeding 15mm. Joints to be cleaned using compressed air to remove dust/loose particles etc. Polystyrene/polyethylene back up rod of suitable size having and interference fit with joints. Entire surface of joints to be primed using Primer 20, Balance area of joint to be filled with polyurethane based sealant COLPOR -200 (Pitch free gray/black) of FOSROC chemicals pvt ltd / CHOKSEY / BOSTIK or Equivalent. Applying masking tape on edges of joints to prevent accidental spillage of sealant on top surfaces to give neat finish to the sealant and removing masking tape after the application of sealant all as specified and directed by Engr-in-Charge. | 130 | Running Metre | 680 ₹88,400 | 600 ₹78,000 | 400 ₹52,000 Lowest |
| 2.00 | Material and Labour for Preparation of joints by Taking out the existing sealant or any other compound and wherever joints are cracked in the sides by cutting using mechanical methods. Prepared joint shall have a width not exceeding 20mm and upto a depth of not exceeding 30mm. Joints to be cleaned using compressed air to remove dust /loose particles etc. Polystyrene/polyethylene back up rod of suitable size having and interference fit with joints. Entire surface of joints to be primed using Primer 20, Balance area of joint to be filled with polyurethane based sealant COLPOR -200 (Pitch free gray/black) of FOSROC chemicals pvt ltd /CHOKSEY/BOSTIK or Equivalent. Applying masking tape on edges of joints to prevent accidental spillage of sealant on top surfaces to give neat finish to the sealant and removing masking tape after the application of sealant all as specified and directed by Engr-in-Charge. | 178 | Running Metre | 980 ₹1,74,440 | 650 ₹1,15,700 | 564 ₹1,00,392 Lowest |
| 3.00 | Material and Labour for Preparation of joints by Taking out the existing sealant or any other compound and wherever joints are cracked in the sides by cutting using mechanical methods. Prepared joint shall have a width not exceeding 30mm and upto a depth of not exceeding 45mm. Joints to be cleaned using compressed air to remove dust /loose particles etc. Polystyrene/polyethylene back up rod of suitable size having and interference fit with joints. Entire surface of joints to be primed using Primer 20 of FOSROC chemicals pvt ltd or Equivalent MAKE : CHOKSEY/BOSTIK. Balance area of joint to be filled with polyurethane based sealant COLPOR -200 (Pitch free gray/black) of FOSROC chemicals pvt ltd. Applying masking tape on edges of joints to prevent accidental spillage of sealant on top surfaces to give neat finish to the sealant and removing masking tape after the application of sealant all as specified and directed by Engr-in-Charge. | 430 | Running Metre | 1,200 ₹5,16,000 | 700 ₹3,01,000 Lowest | 846 ₹3,63,780 |
| 4.00 | Material and Labour for Preparation of joints by Taking out the existing sealant or any other compound and wherever joints are cracked in the sides by cutting using mechanical methods. Prepared joint shall have a width not exceeding 40mm and upto a depth of not exceeding 60mm. Joints to be cleaned using compressed air to remove dust /loose particles etc. Polystyrene/polyethylene back up rod of suitable size having and interference fit with joints. Entire surface of joints to be primed using Primer 20 , Balance area of joint to be filled with polyurethane based sealant COLPOR -200 (Pitch free gray/black) FOSROC chemicals pvt ltd /CHOKSEY/BOSTIK or Equivalent. Applying masking tape on edges of joints to prevent accidental spillage of sealant on top surfaces to give neat finish to the sealant and removing masking tape after the application of sealant all as specified and directed by Engr-in-Charge.
Note:10 year guarantee should be given by executing agency/contractor for joint filling to MES department.(For item no 1 to 4) | 410 | RUNNING METRE | 1,360 ₹5,57,600 | 750 ₹3,07,500 Lowest | 1,128 ₹4,62,480 |
| 5.00 | Material and Labour for making good the existing Dummy/construction and damaged edges (at joints), cracks, pot holes etc. in cement concrete floor by cutting around to true vertical surfaces by using diamond cutter, chisel, etc, and removing the debris and other foreign materials to a distance exceeding 1.5KM and not exceeding 5.0 KM and depositing where directed including necessary preparation of the surfaces by cleaning the sides and bottom surfaces using compressed air (diesel driven compressor of suitable capacity) and application of epoxy resin mortar mix to the required depth with ' Nittomortar S ' (Make : FOSROC chemicals pvt ltd /CHOKSEY/BOSTIK or Equivalent) to a true right angle all as specified by manufacturers instructions and as directed by Engr-in-charge.
Note :- Item No. 1 to 5 : Contractor or his rep will attend and repair joint filling within 48 hours after receiving order from Engr-in-Charge. If failing penal recovery at the rate of Rs. 500/per day will be effected for the delay period. The amount will be recovered from the payment to the contractor from running account receipt and final bill. | 0.5 | Cubic Metre | 2,90,000 ₹1,45,000 Lowest | 5,00,000 ₹2,50,000 | 5,14,000 ₹2,57,000 |
| 6.00 | M & L for one coat of Painting lines, dashes, arrows, letters, etc on roads, pavements and the like exc 10 cm wide with road marking paint, Any colour as approved, including preparation of existing concrete surface, complete all as specified as directed by Engineer-in-charge. | 1,800 | Square Metre | 170 ₹3,06,000 | 200 ₹3,60,000 | 110 ₹1,98,000 Lowest |
| 7.00 | M & L for one coat of Painting lines, dashes, arrows, letters, etc on roads, pavements and the like n.exc 10 cm wide with road marking paint, Any colour as approved, including preparation of existing concrete surface, complete all as specified as directed by Engineer-in-charge. | 210 | Ten Running Metre | 390 ₹81,900 | 200 ₹42,000 | 90 ₹18,900 Lowest |
| 8.00 | Material and Labour for preparation of old painted surfaces of steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | 45 | Square Metre | 110 ₹4,950 | 110 ₹4,950 | 90 ₹4,050 Lowest |
| 9.00 | Removing of old painted marking in tarmac, using paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats, any width. Complete cleaning off the surfaces to match with adjacent surface, complete all as specified and directed. | 22 | Square Metre | 190 ₹4,180 | 110 ₹2,420 | 35 ₹770 Lowest |
Tender Value
₹24 L
EMD Value
₹48,000
Closing Date
29 Aug 2025, 6:00 pmClosed
GE AF MARATHAHALLI
GE AF MARATHAHALLI WIND TUNNEL ROAD, KEMPAPURA, YEMALUR POST, BANGALORE. PIN- 560037
REPAIR TO JOINT FILLING IN TARMAC AND ROAD MARKING PAINT TO TARMAC, TAXI TRACK AREA AND INSIDE HANGAR AT ASTE UNDER GE (AF) MARATHAHALLI
2025_MES_723984_1
8772/E8
Open Tender
Civil Works
Item Rate
270 days
GE AF MARATHAHALLI
AS PER ENIT
7 documents required · 7 mandatory
₹500
GE AF MARATHAHALLI
₹48,000
Yes
8 Nov 2025
1 Aug 2025
3 Sept 2025
1 Aug 2025
29 Aug 2025
14 Aug 2025
Amount
Material and Labour for Preparation of joints by Taking out the existing sealant or any other compound and wherever joints are cracked in the sides by cutting using mechanical methods. Prepared joint shall have a width not exceeding 10mm and upto a depth of not exceeding 15mm. Joints to be cleaned using compressed air to remove dust/loose particles etc. Polystyrene/polyethylene back up rod of suitable size having and interference fit with joints. Entire surface of joints to be primed using Primer 20, Balance area of joint to be filled with polyurethane based sealant COLPOR -200 (Pitch free gray/black) of FOSROC chemicals pvt ltd / CHOKSEY / BOSTIK or Equivalent. Applying masking tape on edges of joints to prevent accidental spillage of sealant on top surfaces to give neat finish to the sealant and removing masking tape after the application of sealant all as specified and directed by Engr-in-Charge.
Material and Labour for Preparation of joints by Taking out the existing sealant or any other compound and wherever joints are cracked in the sides by cutting using mechanical methods. Prepared joint shall have a width not exceeding 20mm and upto a depth of not exceeding 30mm. Joints to be cleaned using compressed air to remove dust /loose particles etc. Polystyrene/polyethylene back up rod of suitable size having and interference fit with joints. Entire surface of joints to be primed using Primer 20, Balance area of joint to be filled with polyurethane based sealant COLPOR -200 (Pitch free gray/black) of FOSROC chemicals pvt ltd /CHOKSEY/BOSTIK or Equivalent. Applying masking tape on edges of joints to prevent accidental spillage of sealant on top surfaces to give neat finish to the sealant and removing masking tape after the application of sealant all as specified and directed by Engr-in-Charge.
Material and Labour for Preparation of joints by Taking out the existing sealant or any other compound and wherever joints are cracked in the sides by cutting using mechanical methods. Prepared joint shall have a width not exceeding 30mm and upto a depth of not exceeding 45mm. Joints to be cleaned using compressed air to remove dust /loose particles etc. Polystyrene/polyethylene back up rod of suitable size having and interference fit with joints. Entire surface of joints to be primed using Primer 20 of FOSROC chemicals pvt ltd or Equivalent MAKE : CHOKSEY/BOSTIK. Balance area of joint to be filled with polyurethane based sealant COLPOR -200 (Pitch free gray/black) of FOSROC chemicals pvt ltd. Applying masking tape on edges of joints to prevent accidental spillage of sealant on top surfaces to give neat finish to the sealant and removing masking tape after the application of sealant all as specified and directed by Engr-in-Charge.
Material and Labour for Preparation of joints by Taking out the existing sealant or any other compound and wherever joints are cracked in the sides by cutting using mechanical methods. Prepared joint shall have a width not exceeding 40mm and upto a depth of not exceeding 60mm. Joints to be cleaned using compressed air to remove dust /loose particles etc. Polystyrene/polyethylene back up rod of suitable size having and interference fit with joints. Entire surface of joints to be primed using Primer 20 , Balance area of joint to be filled with polyurethane based sealant COLPOR -200 (Pitch free gray/black) FOSROC chemicals pvt ltd /CHOKSEY/BOSTIK or Equivalent. Applying masking tape on edges of joints to prevent accidental spillage of sealant on top surfaces to give neat finish to the sealant and removing masking tape after the application of sealant all as specified and directed by Engr-in-Charge. Note:10 year guarantee should be given by executing agency/contractor for joint filling to MES department.(For item no 1 to 4)
Material and Labour for making good the existing Dummy/construction and damaged edges (at joints), cracks, pot holes etc. in cement concrete floor by cutting around to true vertical surfaces by using diamond cutter, chisel, etc, and removing the debris and other foreign materials to a distance exceeding 1.5KM and not exceeding 5.0 KM and depositing where directed including necessary preparation of the surfaces by cleaning the sides and bottom surfaces using compressed air (diesel driven compressor of suitable capacity) and application of epoxy resin mortar mix to the required depth with ' Nittomortar S ' (Make : FOSROC chemicals pvt ltd /CHOKSEY/BOSTIK or Equivalent) to a true right angle all as specified by manufacturers instructions and as directed by Engr-in-charge. Note :- Item No. 1 to 5 : Contractor or his rep will attend and repair joint filling within 48 hours after receiving order from Engr-in-Charge. If failing penal recovery at the rate of Rs. 500/per day will be effected for the delay period. The amount will be recovered from the payment to the contractor from running account receipt and final bill.
M & L for one coat of Painting lines, dashes, arrows, letters, etc on roads, pavements and the like exc 10 cm wide with road marking paint, Any colour as approved, including preparation of existing concrete surface, complete all as specified as directed by Engineer-in-charge.
M & L for one coat of Painting lines, dashes, arrows, letters, etc on roads, pavements and the like n.exc 10 cm wide with road marking paint, Any colour as approved, including preparation of existing concrete surface, complete all as specified as directed by Engineer-in-charge.
Material and Labour for preparation of old painted surfaces of steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Removing of old painted marking in tarmac, using paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats, any width. Complete cleaning off the surfaces to match with adjacent surface, complete all as specified and directed.
R K SINGH AND CO (BID ID -3402273)
B5BUILDING SOLUTIONS (BID ID -3402422)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .