Tender ID

Karnataka

Retender

Works

Buildings

PACKAGE-1 CONSTRUCTION OF ONE CLASS ROOM AT 1) MAHADEVAPURA GHPS 2) KEVERIHALLI GLPS 3) M KOTHURU GHPS 4) KOOLURU GLPS IN KGF TALUK KOLAR DISTRICT

Public Works Department

PWD Division Office Kolar | Karnataka

Amount: ₹46.9 LCloses: 17 Jun 2025Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published2 Jun 2025
Closed17 Jun 2025
Retendered2 Jun 2025

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 2 Jun 2025

Tender Value

₹46.9 L

EMD Value

₹93,900

Closing Date

17 Jun 2025, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Govind Rao

Office Number

Mobile Number

Work Description

PACKAGE-1 CONSTRUCTION OF ONE CLASS ROOM AT 1) MAHADEVAPURA GHPS 2) KAVERIHALLI GLPS 3) M KOTHURU GHPS 4) KOOLURU GLPS IN KGF TALUK, KOLAR DISTRICT

Tender Information

Tender ID

PWD/2025-26/BD/WORK_INDENT22026

Reference Number

PWD/2025-26/BD/WORK_INDENT22026

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Kolar

Source Website

Subscribe to view

Documents Required

6 documents required · 6 mandatory

Technical Bid

RequiredValid PWD Registration certificate For ClassIII and above

RequiredAnnual turnover certificate issuedbyChartered accountant with UDIN Number for past 5 years i.e.,2020-21,2021-22,2022-23,2023-24,2024-25

RequiredWork done certificate issued by not below the rank of Executive Engineer

RequiredB Value Certificate

RequiredGST Registration Certificate

RequiredLine of Credit

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Contractors Should be registered with KPWD Class-III and above Registration

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non accessibility of KPP portal due to internet connectivity issues and technical glitches at bidders end

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder

Conditional tenders will not be accepted

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs

The cost of the Tender form shall not be refundable

The employer is not responsible for any delay in accessing KPP Portal

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval.

In the case of the death of the contractor after executing the agreement / commencement of the work, his/her legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents KW3

The successful Tenderer shall deliver to the Employer a Security deposit in any of the forms given Clause 24.1 of ITT for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with Clause 25.5 & 24.3 of ITT and Clause 44 of the Conditions of Contract

Materials like steel, cement etc., required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work at their own cost

The contractors assessed available tender capacity will be calculated as per the clause 3.5 of STD tender document Attached.

All the items in the tender including all lead, lifts, loading unloading, transportation, labor, hire charges of machinery curing for concrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer in charge of this work

Contractor should take all precautionary measures to avoid any damage to the utilities during excavation as well as utility shifting. To that extent the contractor should identify the client

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund.

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons.

Contractor should follow strictly the prevailing rules of labor act &The contractor should employ only registered labours as per Govt. Circular No. PWD/198/BMS/2009/ Dated: 24-06-2009

Estimate rates are excluding GST as per common SR 23-24 and prevailing GST (18% of amount put to tender) amount is kept in form of lumpsum and in sanctioned estimate according to guidelines in common SR. Therefore, amount put to tender and ECV amount are excluding GST. KPPP portal format has no option to add GST separately at the stage of Draft Tender Schedule (DTS) process for overall amount put to tender, tender has been inviting through an option with INCLUSIVE but the item wise rate does not include GST. Hence GST will be paid separately for the quoted amount accordingly.

The Defect liability Period is One year

The difference amount submitted by the contractor for the work will be released after successful completion of the work and receiving final bill and the 5% amount (Security deposit) will be released after completion of defect liability period

As per Government circular no: FD 355 EXP 12/2024 dtd 01.08.2024, Letter of Intent (LoI) will be issued in Karnataka Public Procurement Portal 2.0 software, contractor has to accept LOI online and submit the BG s through KPP portal within 20 days. if not tender will be rejected as per Guidelines.

Technical Criteria

Past Experience

3.2 b. To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21 to 2024-25 satisfactorily completed as a prime contractor for similar nature of work i.e, Building Construction work to an extent of 50% of the cost of the work of value not less than Rs. 23.47 Lakhs (Past experience) Certified duly by the 0fficer not below the rank of Executive Engineer

Work Done Certificate

3.2 c. executed in any one year in the last five years i.e. 2020-21 to 2024-25, the following minimum 80% quantities of work:1) EWE/Embankment/Subgrade/Earthen Shoulders in Cum-219.00 2)PCC/RCC in Cum-140.00 3)Steel Reinforcement(TMT)-7.40 MT 4)Size Stone Masonry/BBM/Solid Concrete Blocks-114.00 Cum5)CementPlastering-850.00Sqm 6)Flooring(Vetrified/Granite/Ceramic)-206.00 Sqm 7) Painting-913.00 Sqm

Work Done Certificate

Capabilities of Vendor

3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity (A X N X 2.5 - B)where A-Maximum value of civil engineering works executed in any one year during the last five years(updated to 2024-25 price level) taking into account the completed as well as works in progress. N-Number of years prescribed for completion of the works for which tenders are invited.B- Value, at 2025-26 price level,of existing commitments and on-going works to be completed during the next 6 months (period of completion of the works for which Tenders are invited)

Audited CA Certificate of Annual Turnover

Financial Status

3.1All Tenderers shall provide the requested information accurately and in sufficient detail in Section 3 Qualification information. 1.To qualify for award of this contract,each Tenderer in its name should have in the last five years i.e. 2020-21 to 2024-25achieved in at least Two financial years a minimum financial turnover(in all classes of civil engineering construction works only) of Rs.46.94 Lakhs Financial Status(Certificate from CA with UDIN Number,if Failed to satisfy the condition tender will be rejected)

Audited CA Certificate of Annual Turnover

liquid assets and /or availability of credit facilities of not less than Rs 14.082 Lakhs Credit lines/ letter of credit/ certificates from Nationalized / Scheduled banks banks not less than 3 (Three) months old from the date of Tendering for meeting the fund requirement etc

Line of Credit

Others

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Others -- Not Required

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Others -- Not Required

List of existing commitments and ongoing works

Others -- B value certificate

List of works for which tenders already submitted

Others -- B value certificate

Banker Details for reference

Others -- mail ID, phone no. bank address etc.,

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Others -- Not Required

Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years

Others -- Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Others -- Not Required

Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)

Others -- Not Required

Work Locations

Fee & Financial Details

Tender Fee Amount

₹1,180

EMD Fee Amount

₹93,900

Important Dates

Last Activity

2 Jun 2025

Published

2 Jun 2025

Bid Opening

18 Jun 2025

Download Ends

16 Jun 2025

BOQ Preview

•

CONSTRUCTION GOVT OF LOWER/HIGHER PRIMERY SCHOOL BUILDING IN MAHADEVPURA,PARANADAHALLI,KAVERIHALLI,M KOTTURU,AND KOOLURU IN KGF TALUK KOLAR DIST

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, tr...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing Size Stone masonry with hard stone in foundation & plinth with

•

Cement mortar 1:6 (1 cement : 6 coarse sand) ---- With all leads and lifts cost and conveyance of all materials, cost of labour...

•

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lin- ing, including cost of materials, labour, curing as...

•

Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse ...

•

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including co...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and r...

•

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removi...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and...

•

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings ...

•

Providing, laying & fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid...

•

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dus...

•

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including ...

•

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standar...

•

Food Graded water proofing Membrane - Providing and laying water proofing treatment to the Water tanks & Liq- uid Retaining structures with two component acrylic polymer modified cementitious waterpro...

•

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for t...

•

Providing and fixing 12 m thick flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete. ---- With all lead...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...

•

Supplying heavy gauge PVC conduit pipe . mm dia. mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The con...

•

Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement ...

•

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 p...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

•

Supplying and fixing PVC/metal conduit Deep junction box 19/20 mm deep Junction box ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machiner...

•

Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery e...

•

Supplying And Fixing Metal Fan Box with Round Hook. ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipment, transportation char...

•

Point wiring using Copper wire without switch.: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.(...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.(Make : Anchor /GM/Cona) 6A One Way Switch ---- With all leads and lifts cost...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.(Make : Anchor /GM/Cona) 6A Three Way Socket ---- With all leads and lifts co...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.(Make : Anchor /GM/Cona) Stepped Fan Regulator Two Module ---- With all leads...

•

Supplying And fixing/replacing of 6/16/32A electricalaccessories on existing switch board.6A Pendant Holder ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, ...

•

Supplying And fixing/replacing of 6/16/32A electricalaccessories on existing switch board. 6A Batten Holder ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, ...

•

Supplying of .feet -PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power fact...

•

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...

•

Supplying & fixing of retrofit type - LED bulb . W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...

•

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary ...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

•

GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 3 mm GI strip ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing,...

•

Wiring for 1.1 kV Class HR (Heat Resistant) PVC Insulated & Sheathed Aluminium Single Core Lead wires as per IS-694: 2010 as per BESCOM Specification (Page:451) PVC Wire - 10 SqmmWeight per 100 Mtr Co...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

SCHOOL BUILDINGS RANDOMISATION.pdf

Others - Randomization Copy • 0.04 MB

kw3 Indent No 22026 KGF.doc

Tender Document • 0.30 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Buildings

PACKAGE-1 CONSTRUCTION OF ONE CLASS ROOM AT 1) MAHADEVAPURA GHPS 2) KEVERIHALLI GLPS 3) M KOTHURU GHPS 4) KOOLURU GLPS IN KGF TALUK KOLAR DISTRICT

Public Works Department

PWD Division Office Kolar | Karnataka

Amount: ₹46.9 LCloses: 17 Jun 2025Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published2 Jun 2025
Closed17 Jun 2025
Retendered2 Jun 2025