GRASS CUTTING FOR THE RUNWAY, PTT AND DISPERSAL AREA AT TECH AREA AND REPAIR/MAINT OF VOLTAGE STABLIZERS AND CONNECTED PANELS AT AFS HASIMARA

Amount

Labour and T&P for cutting grass by mechanically operated slasher including removing of material upto a distance exc 250m & n.exc 500m, obtained from cutting & cleaning, (from the concrete edges, Runway, PTT, Links, ORA shoulders), complete all as specified and directed. (Note : (i) Mechanical slasher (i.e.set of one tractor & Jungle Jim) with POL & MT driver shall be arranged by the contractor and quoted rates shall deemed to be inclusive all provisions. (ii) The mechanical slasher shall be operated from 0900 hrs to 1700 hrs including lunch break of half an hour, excluding sundays and holidays on requirement basis. (iii) Minimum output of one mechanical slasher shall not be less than 6000sqm per day (grass cutting clear area). (iv) Attendance register shall be maintained by the Engg in Charge for operation of this item and shall be submitted to GE duly signed by contractor, JE and Eng- in-charge while processing payment of RAR. (v) On any particular day more than one slasher may be provided by the contractor as on required basis. The unit of work shall be measured multiple of job per day.

Labour and T&P for cutting of grass by bush cutter operated slasher including removing of material upto a distance exc 250m & n.exc 500m, obtained from cutting & cleaning, (from the concrete edges of Runway, PTT, Saucer drain etc), complete all as specified and directed. (Note : (i) Bush cutter with POL & operator shall be arranged by the contractor and quoted rates shall deemed to be inclusive all provisions. (ii) The bush cutter shall be operated from 0900 hrs to 1700 hrs including lunch break of half an hour, excluding sundays and holidays on requirement basis. (iii) Minimum output of one bush cutter shall not be less than 500 Sqm per day (grass cutting clear area). (iv) Attendance register shall be maintained by the Engg in Charge for operation of this item and shall be submitted to GE duly signed by contractor, JE and Eng-in-charge while processing payment of RAR). (v) On any particular day more than one bush cutter may be provided by the contractor as on required basis. The unit of work shall be measured multiple of job per day.

Cutting/scraping grass/wild growth and all vegetation etc manually around the runway lights, inaccessible area around runway PTT for jungle jim etc, stacking into heaps and removing off from the premises upto a distance exceeding 250m & n.exc 500m, complete all as specified and directed. (Note:- The work shall be carried out on requirement basis during the contract period.)

S & F Sign board rectangular in shape (as per existing sample) made out of 1mm thick MS sheet of size 0.90Mx0.80m (approx) fixed to MS hollow pipe of size 45mmx45mm, 02 Nos, of length 1.50m above GL and 0.45m below GL embeded in and including PCC (1:2:4) type B-1 of size 0.45x0.45x0.60m and necessary earth work, excavation etc complete and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of surface, writting letters/arrows etc of 6 inch height made out of fluorescent strip and fixing on each outer face of sheet with approved adhesive including dismanting of existing sign board of any size, complete all as specified and directed.

S & F Sign board rectangular in shape (as per existing sample) made out of 1mm thick MS sheet of size 0.90Mx0.90m (approx) fixed to MS hollow pipe of size 45mmx45mm, 02 Nos, of length 1.50m above GL and 0.45m below GL embeded in and including PCC (1:2:4) type B-1 of size 0.45x0.45x0.60m and necessary earth work, excavation etc complete and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of surface, writting letters/arrows etc of 6 inch height made out of fluorescent strip and fixing on each outer face of sheet with approved adhesive including dismanting of existing sign board of any size, complete all as specified and directed.

S&F in repair fluorescent strip for writing letter/arrows etc of size 6 inch height, fix to each outer face of sign board with approved adhessive, complete all as specified and directed.

Material and labour for preparation of old painted surface of concrete/flexible pavement like runway, taxi track, link etc, by removing the greasy materials, dirt, dust etc and applying one coat of water based road marking paint grade-2 conforming to IS 164-1981, of tint white/yellow/golden yellow as approved by GE, as in lines, dashes, arrows, letters etc over 10cm in width or girth, complete all as specified and directed. (Note :- Paint shall be applied on prepared surfaces of concrete in a manner, so that thick paint shall stand boldly and solidly on the surfaces without showing brush mark on surfaces applied for. Surfaces shall be finished by application of paint till desired result obtained.)

Material and labour for painting lines, dashes, arrows, letters etc on roads, pavements and the like not exceeding 10cm width or girth with one coat of water based road marking paint Grade-2, conforming to IS-164-1981 (tint white/yellow/golden yellow as approved), complete all as specified and directed.

Material and labour for preparation of old painted concrete, asbestos cement or plastered surfaces and applying one coat of synthetic enamel paint (of approved tint) 1st grade quality on surfaces of any description over 10cm width or girth, complete all as specified and directed.

Material and labour for preparation of old treated bituminous/asphaltic surfaces (over both ends of runway) by removing all vegetation, sweeping with brooms and finally clean by fanning with gunny bags to remove all loose dust, dirt and applying one thick coat of white wash by spreading on prepared surfaces thoroughly to stand out boldly, solidly without showing signs of bruss mark on painted surfaces, complete all as specified and directed.

Demolition of brick work or hollow block masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed.

M & L for brick work with sub-class ‘B' bricks, straight or curved on plan to any radius, in half brick thick walls built in cement mortar (1:4), complete all as specifed and directed

M & L for brick work with sub-class ‘B' bricks, straight or curved on plan exceeding 6m mean radius in one brick thick walls built in cement mortar (1:6), complete all as specifed and directed

M&L for 15mm thick rendering in CM (1:6) on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash, complete all as specified and directed.

Servicing and repair of servo voltage stabilizer by manufacturer rep of capacity upto 50 KVA by disconnecting of all electrical connections of stabilizer and check the auto/manual function of stabilizer, to check the oil level, oil seal leakage if any, check all voltmeter and ampmeter working condition or not. Taking out top cover of stabilizer for replacing defective spares/items, cleaning the dust by air blower, check the neutral and earthing connections properly or not and to be done properly, to be check the all nut bolts tightining and refixing the same in existing position and reconnect all the incoming/outgoing cables properly including testing and commissioning, complete all as specified and directed. Note :- (i) Replacement of defective spares for making the voltage stabilizer units in satisfactory working condition shall be measured & paid separately under relevant items as 'Supply only' (ii) Labour charges for taking out old spares & refixing of new spares shall deemed to be included in unit quoted rate.

All as per item No. 16 here-in-above but 75 KVA to 150 KVA, complete all as specified and directed.

All as per item No. 16 here-in-above but 200 KVA to 630 KVA, complete all as specified and directed.

Supply only electronic servo circuit card (PCB), complete all as specified and directed. (Make:- AE/ APLEB/ ANDREWYULE /SINETRAC/ VOLINA/ VINITEC/ IECO/ V-GUARD/ INDIAN TRANSFORMER & ELECTRICALS PVT.

Supply only servo control panel, complete all as specified and directed. (Make:- AE/ APLEB/ ANDREWYULE /SINETRAC/ VOLINA/ VINITEC/ IECO/ V-GUARD/ INDIAN TRANSFORMER & ELECTRICALS PVT.

Supply only trigger (control) transformer 9V/18V, complete all as specified and directed. (Make:- AE/ APLEB/ ANDREWYULE /SINETRAC/ VOLINA/ VINITEC/ IECO/ V-GUARD/ INDIAN TRANSFORMER & ELECTRICALS PVT. LTD.(GURGAON

Supply only push button/auto - manual switch/micro switch/potentio meter/limit switch/lever switch, complete all as specified and directed. (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD)

Supply only indicator lamp, complete all as specified and directed. (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD)

Supply only carbon brush, complete all as specified and directed. (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD)

Supply only dimmer 8 Amps, complete all as specified and directed. (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD)

Supply only dimmer 10 Amps, complete all as specified and directed. (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD)

Supply only dimmer 20 Amps, complete all as specified and directed. (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD)

Supply only dimmer 40 Amps, complete all as specified and directed. (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD)

Supply only dimmer 60 Amps, complete all as specified and directed. (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD)

Supply only dimmer 125 Amps, complete all as specified and directed. (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD)

Supply only dimmer 200 Amp, complete all as specified and directed. s (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD)

Supply only ammeter with CT (Digital/Analog) with connection controlling switch complete (Suitable size and shape). (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD)

Supply only voltmeter 0-400 volts flush type with connection controlling switch (suitable size and shape), complete all as specified and directed. (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD)

Supply only servo motor 3 K.G torque single phase with RC, complete all as specified and directed. (Make:- AE/ APLEB/ ANDREWYULE /SINETRAC/ VOLINA/ VINITEC/ IECO/ V-GUARD/ INDIAN TRANSFORMER & ELECTRICALS PVT. LTD.(GURGAON)

Supply only servo motor 10 K.G torque single phase with RC, complete all as specified and directed. (Make:- AE/ APLEB/ ANDREWYULE /SINETRAC/ VOLINA/ VINITEC/ IECO/ V-GUARD/ INDIAN TRANSFORMER & ELECTRICALS PVT. LTD.(GURGAON)

Supply only servo motor 20 K.G torque single phase with RC, complete all as specified and directed. (Make:- AE/ APLEB/ ANDREWYULE /SINETRAC/ VOLINA/ VINITEC/ IECO/ V-GUARD/ INDIAN TRANSFORMER & ELECTRICALS PVT. LTD.(GURGAON)

Supply only rotary switch 5 Amp for R.Y.B phase, complete all as specified and directed. ((Make:- AE/ L & T (RISHABH)/SECURE/ C & S ELECTRIC/HAVELLS/ ANCHOR)

upply only PCB holder, complete all as specified and directed. (Make:- AE/ APLEB/ ANDREWYULE /SINETRAC/ VOLINA/ VINITEC/ IECO/ V-GUARD/ INDIAN TRANSFORMER & ELECTRICALS PVT. LTD.(GURGAON)

Rewidning main transformer any capacity complete wounded with supper enamel insulated/DPC/DCC Copper conductor ISI marked of suitable guage as per existing, complete all as specified and directed.

M & L for refilling/topping up/replacement of stabilizer oil with new dehydrated stabilizer oil. Open lid cover of stabilizer including changing of gasket set if required complete and re-fixing of top lid cover without any damage to stabilizer suitable for working voltage 440 volts grade including necessary dehydration to achieve dielectric strength min 40 KV. including internal/external connection and testing on load of stabilizer, complete all as specified and directed. (Make:- HPCL(SEETAL)/ HP (SEETAL)/ SERVO/GULF/ CASTROL)

Supply and fixing of MCCB 200 Amps AC 4 pole 415 Volt 36 KA breaking capacity as per IS/IEC 60947-2 & IEC 60947-2 with thermal magnetic release range 200-250 Amp including providing new thimble/lugs of suitable size and taking down old unserviceable, complete all as specified and directed. Make : L & T Cat part No CM92109OOP1OG or equivalent in Schneider / Legrand / ABB

Supply and fixing of MCCB 160 Amps AC 4 pole 415 Volt 36 KA breaking capacity as per IS/IEC 60947-2 & IEC 60947-2 with thermal magnetic release range 160-200 Amp including providing new thimble/lugs of suitable size and taking down old unserviceable, complete all as specified and directed. Make : L & T Cat part No CM92109OON1OG or equivalent in Schneider / Legrand / ABB

Supply and fixing of MCCB 125 Amps AC 4 pole 415 Volt 36 KA breaking capacity as per IS/IEC 60947-2 & IEC 60947-2 with thermal magnetic release range 125-160 Amp including providing new thimble/lugs of suitable size and taking down old unserviceable, complete all as specified and directed. Make : L & T Cat part No CM92108OOM1OG or equivalent in Schneider / Legrand / ABB

Supply and fixing of MCCB 100 Amps AC 4 pole 415 Volt 36 KA breaking capacity as per IS/IEC 60947-2 & IEC 60947-2 with thermal magnetic release range 100-125 Amp including providing new thimble/lugs of suitable size and taking down old unserviceable, complete all as specified and directed. Make : L & T Cat part No CM92108OOL1OG or equivalent in Schneider / Legrand / ABB Note (ii): An amount of Rs.13858.00 on account of credit schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S I P GROUP

M/S. VINITA CONSTRUCTION

M/S SARKAR ELECTRIC

M/S MANODEEP CONSTRUCTION

MAJUMDER ENTERPRISE

M/S SANMILAN NANDI

MAA TARA TRADING