GE/U(N)-49/2020-21 REPAIR TO FLOORING JOINERIES PLASTERING ROOFING PLINTH PROTECTION BRICK WORK IN ENGR REGT AND AT BN

Amount

Dismantling floor , hearth or wall tiling including cement mortar bedding complete, removing serviceable tiles to store and rubbish off the premises, all as specified & directed

Non skid coloured glazed ceramic tiles area of each tile exc. .11 sqm but n.exc. 18 sqm 7mm to 8mm mm thick as in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed of CM(1:4) incl skirting all as specified & directed by Engr-in-Charge.

Vitrified ceramic tiles any colour 10mm thick(Square or rectangular) poliahed, area of each tile not exceeding 0.36 sqm(Size 600mmx600mm) in floor etc,Set and jointed in neat cement slurry and pointed in coloured cement to match, including skirting including bedding layaers of CM 1:4 (20mm thick) all as per specified & directed by Engr-In-Charge.

Vitrified ceramic tiles any colour 10mm thick(Square or rectangular) polished Double charged, area of each tile not exceeding 0.36 sqm (Size 600mmx600mm) in floor etc,Set and jointed in neat cement slurry and pointed in coloured cement to match including bedding layaers of CM 1:4 (20mm thick) with skirting all as per specified & directed by Engr-In-Charge.

Glazed ceramic tiles (coloured) on vertical surfaces 450x300x6/300x600mm to 7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match including 10mm thick plaster to receive tile all as specified & directed by Engr -in -Charge.

Machine cut kota stone slab flooring 18-20mm thick over 20 mm th cement screed in CM 1:3 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Machine cut kote stone slab flooring 18-20mm thick over 15mm thick in CM 1:4 jointed with grey cement slurry mixed with pigment to match the shade including rubbing and polishing complete all as specified & directed by Engr-in-Charge.

18 to 20 mm thick,Granite any colour any type machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types over 20 mm th screed bed in CM 1:4 complete all as specified & directed by Engr-in-Charge.

Rounding of / moulding to edge (half round) of stone of any description including rubbing and polishing (Granite finish), all as specified & directed by Engr-in-Charge.

Taking down cement plaster of any description on bricks, PCC block or stone walls, etc. Including raking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed by Engr-in-Charge.

15mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified & directed by Engr-in-Charge.

15 mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and smooth mixed with water proofing compound complete all as specified & directed by Engr-in-Charge.

15 mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:3 and finished even and smooth mixed with water proofing compound complete all as specified & directed by Engr-in-Charge.

Providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection even and smooth with using extra cement complete all as specified.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified.

All as per item above but exceeding 1.5 Sqm and not exc 4 Sqm each complete all as specified & directed by Engr-in-Charge.

Pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer all as specified & directed by Engr-in-Charge.

Pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, complete all as specified & directed by Engr-in-Charge.

Factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified & directed by Engr-in-Charge.

All as per item above but glazed and skeleton shutter with sash bar for glass / wire gauge. all as specified & directed by Engr-in-Charge.

Providing cement concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified & directed by Engr-in-Charge.

Aluninum anodised bolts barrels tower bolts with bright both 150mm long complete all as specified & directed by Engr-in-Charge.

Alunminium handle cost type 150mm long oval type complete all as specified & directed by Engr-in-Charge.

Preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified & directed by Engr-in-Charge.

Preparation of new steel and iron surfaces exceeding 10cms width or girth and applying two coats of synthetic enamel paint over preprimered surface complete all as specified & directed by Engr-in-Charge.

In repairs vitreous china wash down water closet pan `P` or `S` trap ( pedestal pattern ) white including fixing bolts,including connection P trap etc to drain pipe ( or out going pipe) and to flushing pipe,antisyphonage pipe etc complete.all as specified & directed by Engr-in-Charge.

Vitreous china squatting pan ‘Orissa’ pattern size 580X440mm , white with integral foot rest (Excluding flushing system and flush pipe) with ‘P’ or ‘S’ trap all as specified & directed by Engr-in-Charge. .

In repair 10 Ltr PVC valveless syphonic action type flushing cistern low level white with inlet including bracket and 32mm flush pipe of polythylene ball valve,float and handleof low or high density and 15mm PVC connection 450mm long complete.all as specified & directed by Engr-in-Charge.

Demolation of brick work or stone boulder masonery built in cement mortor including all quoins arches pillars etc complete all as specified & directed by Engr-in-Charge.

Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius butt in cm 1.6 complete all as specified & directed by Engr-in-Charge.

- ditto - all as above but except brick complete all as specified & directed by Engr-in-Charge.

Half brick work with sub class 'B' brick straight or curved on plan exc 6m mean radius but in cm 1:4 complete all as specified & directed by Engr-in-Charge.

Viterous china wash basin pedestral type white flat back size 550 x 400mm incl waste couping CP 32mm dia chain and plug and porcelan stopper and CI brackets of iron 65 x 65 x 6mm embedded in PCC block with PCC 1:2:4 type B-1 and PVC waste pipe 32mm dia & CP getting with holes complete all as specified and directed by Engr-in-Chare.

Pillar taps cast copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed of iron pipe of bore 15mm complete all as specified.

PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified & directed by Engr-in-Charge.

In repairTowel rail 600mm long aluminium tower bolts 20mm D type all as specified

Prep of old decorated surfaces and applying two coats of Distemper oil emulsion on walls over a coat of 1mm wall care putty including complete removal of existimg treatmenta complete all as specified & directed by Engr-in-Charge.

Prep of new decorated surfaces and applying two coats of Distemper oil emulsion on walls over a coat of 1mm wall care putty including complete removal of existimg treatmenta complete all as specified & directed by Engr-in-Charge.

Prep of new surfaces and applying two coats of white wash all as specified.

Two coat of cement base paint over newly plastered surfaces of wall including over a coat primer preparing surfaces complete all as specified & directed by Engr-in-Charge.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15mm/20mm dia complete all as specified & directed by Engr-in-Charge.

Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 15mm bore all as specified.

Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 20mm bore all as specified.

Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 25mm bore all as specified.

In repair stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 25mm dia complete all as specified & directed by Engr-in-Charge.

15mm angle valves (chromium plated) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repair complete all as specified & directed by Engr-in-Charge.

In repair 15mm Bib taps, cast copper alloy, fency type chromium plated, with crtuch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified & directed by Engr-in-Charge.

In repairs PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified.

In repair Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I,capacity of water tank 500 Ltr including dismantling & remove old tank from site all as specified & directed by Engr-in-Charge.

In repair Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I,capacity of water tank 1000 Ltr including dismantling & remove old tank from site all as specified & directed by Engr-in-Charge.

Ball brass valves 20mm , high pressure, with polyethene float & fly-nut complete, screwed for iron pipe or brass ferrule & fixed complete all as specified & directed by Engr-in-Charge.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified & directed by Engr-in-Charge.

PCC 1:4:8 type D-2 as in floors 75mm thick complete all as directed & specified

40 mm thick flooring in PCC 1:2:4 type B1 using 20mm graded stone aggregate surfaces finished even and smooth using extra cement (staircase incl steps) complete all as specified & directed by Engr-in-Charge.

Machine pressed concrete interlocking paver block glossy finish, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment over including 50mm thick sand cushion complete all as specified & directed by Engr-in-Charge.

Cement concrete tile size 30cmx 30cm x 25 mm thick machine pressed set & jointed in neat cement slurry as in floors joint fiil up with white grey cement & pigments all including 15mm thick screed bed all as specified & directed by Engr-In-Charge.

Aluminium extruded section hydraulically door closer regukated designation no-1 universal type suitable for door shutter upto 700mm in width & of weight not more than 35 kg all as specified & directed by Engr-In-Charge.

With Wood free EPS Factory made solid pvc moulded door shutter 28 to 30mm thick (stiles) with 2,4,6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2mm plain colour PVC Sheet on back face & Fixing in frame at site as per specification & drawings complete all as specified & directed by Engr-in-Charge.

Solid PVC Door frame of size 50mmx 47mm made out of 5mm wood grain printed PVC Sheet used instead of plain colour sheet PVC sheet reinforced with MS Square tube Xixinf & opening as per specification & drawing & all as specified & directed by Engr-In-Charge.

In repair wash basins, vitreous China flat back, size 550 X 400mm incl CP pillar tap, 32mm size waste coupling, 15 x 450 mm long PVC connection, 32mm size PVC waste pipe & angle brackets 30x30x450mmcomplete all as specified & directed by Engr-in-Charge.

Towel Ring fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms) complete all as specified & directed by Engr-in-Charge.

In repairs vitreous China bowl urinal flat back size of 465x355x265mm white (miniumum) with grating & union for discharge pipe (excluding flushing cistern,)including waste fittings complete all as specified & directed by Engr-in-Charge.

Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for complete all as specified & directed by Engr-in-Charge.

RCC type 1:1.5:3 (using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified & directed by Engr-in-Charge.

RCC type 1:1.5:3 Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like including 15 mm th plastering with water proofing compound as directed laid/made to slope as in RCC roof surfaces complete all as specified & directed by Engr-in-Charge.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified & directed by Engr-in-Charge.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified & directed by Engr-in-Charge.

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engr-in-Charge.

Mild steel bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engr-in-Charge.

Galvanised mild steel wire cloth 0.63mm nominal dia of wire & average width of aperture 1.18mm complete all as specified & directed by Engr-in-Charge.

Factory made steel windows (Box type) with glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, fixed as in repairs, complete all as specified & shown in drawings, complete all as specified & directed by Engr-in-Charge.

Factory made steel windows (Box type) without glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, fixed as in repairs, complete all as specified & shown in drawings, complete all as specified & directed by Engr-in-Charge.

Providing and fixing 30mm thick factory made PVC door shutter consisting of panel of Hollow PVC Profile of 24mm thickness, consisting of frame made out of M.S tubes of 19 gauge thickness and size of 19mmx19mm inserted inside the hollow section of stiles, top and bottom rails and two 19mmx19mm MS tubes inserted horizontally inside the hollow profile section at an equal distance from top and bottom of door and fixed with hollow profile section using 3mm thick Prelam PVC sheet using screws. Hollow PVC profile shall be lipped with 10mm (5mmx2) thick x 24mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant Prelam PVC sheet using solvent cement on both the sides of the panel etc complete as per direction of Engineer-in-Charge, manufacturer's specification and drawing,complete all as specified & directed by Engr-in-Charge.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings, complete all as specified & directed by Engr-in-Charge.

19/20mm thick prelaminated particle board medium density flat pressed single layer type or three layer type with BWR type adhesive.complete all as specified & directed by Engr-in-Charge.

Hasp and staple, 100 mm, mild steel, safety type, stove enalmelled black , including bolt to hinge plate and fixed with screws, all as specified .

Continuous ( Piano ) hinges, mild steel, bright finish or electrogalvanised width of flap 30mm complete all as specified & directed by Engr-in-Charge.

Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, including 5.5 mm thick tinted glass as required anodised aluminum snap beading screws etc. complete all as specified.

Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing,anodised aluminium snap beading, screws,including 5.5 mm thick tinted glass with aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified & directed by Engr-in-Charge.

Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified & directed by Engr-in-Charge.

Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified & directed by Engr-in-Charge.

Dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets,all as specified.

False ceiling with Fibre cement Designer tile any colour painted (Hight Pressure Steam Cured) of 6mm thickness (as per IS-14862) of size 595mm x 595mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspeneded on inter locking metal grid of hot dipped galvanised steel sections (galvanised @120 gms, both sides inclusive) consisting of main T runner with suitably spaced joints to get required length and 15 x 32mm made from 0.30mm thick sheet and cross T of size 15 x 32mm made of 0.30mm sheet spaced between main T at 600mm c/c from a grid of 600x600mm and well angle of size 15x20mm made of 0.30mm thick sheet and laying false ceiling tiles in the grid including required cutting/ making opening for services like diffusers grills, light suspended from ceiling using GI soffit cleats fixed to existing rafters, prulin etc with dash fastners GI adjustable rods of 3mm dia with galvanised butterfly level clips, spaced at 900/1200mm c/c along main T bottom exposed width of 15mm of all T Section shall be centre black prepainted with polyster paint and having a load bearing electric wiring and fixture complete all as specified and directed by Engr-in-Charge.

4mm thick non AC board fixed with screw complete all as specified & directed by Engr-in-Charge.

Hacking out old broken glass any thickness, size quality from wooden frame or steel frame glazed with putty or fixed with beads.

4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified & directed by Engr-in-Charge.

4 mm thick figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane complete all as specified & directed by Engr-in-Charge.

Factory made steel windows (Box type hinge) without glazing bars, dovetailed or welded including hinges, steel handles,tower bolts, steel peg stays etc including one shop coat of red oxide zinc chrome primer, complete all as specified & shown in drawings.complete all as specified & directed by Engr-in-Charge.

Factory made steel windows (Box type hinge) with glazing bars, dovetailed or welded including hinges, steel handles, tower bolta etc steel peg stays etc including one shop coat of red oxide zinc chrome primer complete all as specified & shown in drawings.complete all as specified & directed by Engr-in-Charge.

Dismantling of CGI/AC/ any others sheet of any description incl ridges etc all as specified & directed by Engr-In-Charge.

6mm thick asbestos cement corrugated or semi- corrugated sheets in roofs walls etc all as specified & directed by Engr-In-Charge.

6mm thick asbestos cement corrugated or semi- corrugated sheets as in ridges on roof etc all as specified & directed by Engr-In-Charge.

Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified & directed by Engr-in-Charge.

Pre-Painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified & directed by Engr-in-Charge.

Walling of random rubble stone masonary uncoursed well bonded, bedded and solidly hearted built in cement mortar 1 :6 complete all as specified & directed by Engr-in-Charge.

Precast cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate bonders for stone walling, set in cement mortar 1:6 with paling fair faces including chambers weathering etc. complete all as specified & directed by Engr-in-Charge.

Cement concrete 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in bed block/coping band or string etc. Including use of necessary formworkcomplete all as specified & directed by Engr-in-Charge.

PVC (SWR). Pipe 110mm dia in any length with rubber ring joints, fixed to walls any hieght all as directed.

PVC (SWR). Pipe 75 mm dia in any length with rubber ring joints, fixed to walls any hieght all as directed.

Dismantling of boarding any description fixed in any position complete all as specified & directed by Engr-in-Charge.

Solid PVC Wall Lining ( Wall Panelling) consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement & fixing at site on PVC frame as per specification & directed by Engr-In-Charge

Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410 all as specified & directed by Engr-In-Charge.

Framed brackets of angles or tees with web & flanges cut to shape,drilled & countersunk for screw including bending & welding angles as nessary gusset plastes riveting etc nexc 10kg each brackets ,confirming to Fe 410-0 or Fe-310-0(Brackets over 10 kg each to be measured under structural steel) all as specified & directed by Enge-In-Charge.

Rendering 15mm thick on fair face of brick work or concrete surfaces with CM (1:4) with water proofing compound even & smooth w/o using extra cement complete all as specified & directed by Engr-in-Charge.

Priming the roof surface with bituminous primer @ 0.3 litres/Sqm and applying a coat of semi hot blown 85/25 grade bitumen @ 1.2 Kg/Sqm and thereafter supply and laying polymeric membrane, five layered, of weight not less than 3 Kg per Sqm with centre layer core of 90 micron high molecular density polyethylene film and bonded completely to the surface with overlap of 10cm (overlap to be thermo fused by flame) followed by another coat of semi hot blown 85/25 grade bitumen @ 0.7 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm & applying two coats of Aluminium painting on all surface including dismantling/demolition of existing roof (any type of roof) surface all as specified & directed by Engr-In -Charge

Aluminium guide rail plug venetion blinds of 70mm wide PVC synthetic woven cloth jiltal vertical @ the rate of 70cm in essential way hung to aluminium guise rail with rail plug screws including two plastic strings for hand operation of blinds first for sliding horizontal and later for swivel of blinds complete all as specified and directed.

25mm thick cement concrete 1:2:4 type-B using 12.5mm graded crushed stone aggregate as in floor and finished even and smooth with using extra cement complete all as specified.

M/S GURU DEV BUILDERS

RAMAN KUMAR

SINGH CONST CO