ADDN/ ALTN TO GUARD POST AT VARIOUS LOCATION AND PROVN OF DESERT COOLER STAND IN NCs QUARTERS AND SNCOs BILLETS AT AF STN BKT

Amount

S&F providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories area not exceeding 2.00 sqm each complete as specified and directed.. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)

Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge

Supply and fixing factory made uPVC white colour door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, PER SQUARE METRE S & F Material only 6400.53 5325.41SECTION 8 167 SECTION 8–JOINERY [k.M 8& c complete all as specified and directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; angal iron, barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work drilling and fixing complete conforming to Fe 410-0 all as specified.

M&L for preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified.

Excavation in post holes each n exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25 cm, watering and removing surplus roil to a distance n exc 50 m and making good surfaces soft/loose soil.

S&F in repair Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron illets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165.

S&F Pre-painted galvalume aluminium zinc coating GI bases corrugatede steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /clading to fixed with self tapping screw as specified .

S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L for Mild steel TMTbars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing complete all as specified.

Mild steel TMT bars 5 mm to 8 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling & mass concrete all as specified.

M&L for reinforced Cement Concrete (using 20 mm graded stone aggregate) foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified.

M&L preparation and apply two coats cement base paint on new plastered surfaces of wall, white or tinted complete all as specified.

M&L of cutting out concrete blocks, slabs, brick-work forming toothings for and bonding new work PCC (1:2:4) type B1 using 20mm graded aggregate in post holes etc.

M&L for framed work as in doors or gates of angle or other sections with gusset plates , rails, braces etc complete drilled for fixing of steel sheeting or other covering. Door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fasteing and fixing complete of Fe-410-W(Gde E-250) quality B.

S&F mild steel flat as in frame for cooler stand including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.

M&L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified.

M&L for two coats of cement base paint over a coat ofalkali-resistant priming paint including preparation of surfaces complete all as specified and as directed

S&F MS screw bolts ( Machine make ) with hexagonal or square head at one end screwed the other orscrewed both ends ,each screwed end to be fitted with washers or one hexagoinal or square nut but length of bolt exc. 10 cm and n. exc.1 5cm long and 5 to 10 mm dia of neck complete.

Taking down cement plaster on brick walls etc including racking out joints, hacking for keys in scrubbing down and washing with water etc complete all as specified and directed

M&L for 10mm thick rendering on fair faces of brick work in cement mortar (1:6) finished even and smooth without using extra cement including two coat OBD over one coat of cement base primer complete all as specified and directed

M&L for 15mm thick rendering on other than fair faces of brick work in cement mortar (1:4) finished even and fair including two coat cement base paint over chalk whitening primer complete all as specified and directed.

Supply only Integral water proofing compound @ 3% by weight of cement complete all as specified and directed

M/s JS Constructions

H C CONSTRUCTION

M/s BHAGIRATH INFRA & ALLIED WORKS

HINDUSTAN TRADING COMPANY