REPAIR TO INTERNAL ROAD AND PAINTING AT NAYA RAIPUR MIL STN

Amount

Repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting arounds edges to at least 25mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of raod metal) complete all as specified and directed.

M & L for Moorum/red bajri filling in floors or paving’s for side berms, laid in layers n. exc. 15 cm thick, spread, levelled and rammed including watering call complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L for Hardcore of broken stone or boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for PCC 75 mm thick Type D2 1:4:8 (40 mm graded aggregate) in base of floor complete all as specified and directed.

M & L for Machine pressed coloured glazed cement concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness M-50 grade with gray cement and pigment complete all as specified and directed.

S & F in repair cat eye solar reflective type of metal body alooy of size 100mmx100mmx20mm with PAMA strip lens reflector of model no 972.0 fixed with and incl MS stud of suitable size as per manufactures complete all as specified and directed.

S & F metal tubular delineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflector made out of PMMA and mounted on 45/50mm dia mild steel pipe of 600mm height duly powder coated and thermoplastic elasto meter 3 band of green, red and yellow reflector radium tape of 25mm wide strips with anti-theft steel net for reflector embedding in PCC 1:2:4 (150*150*300mm) type B1 complete all as specified and directed.

M & L for reflective thermo plastic white road marking paint conforming to BIS-3262, laid down through road marking machine in a layer of CRYSTALEX and use of 5 Kg material per square meter for lines, dashes, arrows, Zebra marking etc by incorporating the white glass beads for reflectivity in required width complete all as specified and as directed.

M & L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete as specified and directed.

Supply and installation of CONVEX MIRROR circular of size 1000 mm dia made with ABS Body, Lens/Mirror with unbreakable poly carbonate fixed with clamp with MS pipe 80mm dia and upto 5 feet height and fixed to the ground by PCC 1:2:4 block of size 45x45x60 cm including excavation, removal and curing complete all as specified and directed by Engineer-in-Charge. (Make : ABS Engineering, equivalent model of Dark eye or Cats eye or 3M or equivalent make as approved by GE).

Total contract sum shall be calculated after deduction of schedule of credit amount of Rs. Nil

M/S INDIA ENTERPRISES (BID ID -3211969)

SHRI KRISHNA CONSTRUCTIONS (BID ID -3202186)