REPAIR OF JOINERY SANITARY FITTINGS PLUMBING AND WATER SUPPLY OF BLDGS AT MD AND OTM ACCN OF 15 FAD UNDER GE ARMY DHAR ROAD

Amount

Resecuring without taking down of chowkats or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete

Resecuring without taking down of chowkats or frames exc 1.5 sqm not exc 4.00 sqm each but with shutters (without taking off shutters from the frame) complete

Resecuring or easing & adjusting without taking down shutters of any description not exc 1sqm each complete

Resecuring or easing & adjusting without taking down shutters of any description exc 1sqm and not exc 2sqm each complete

Resecuring or easing & adjusting without taking down shutters of any description exc 2sqm each complete

Taking down shutters of any description not exc 1 sqm each complete all as specified and directed

S & F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed

Taking down chowkhats or frame not exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed

S & F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawings on page 146 of SSR Part - II 2004 complete all as specified and directed.

Taking down shutters of any description exc 2 sqm each complete all as specified and directed

Taking down chowkhats or frame exc 1.5 sqm but not exc 4.00 sqm each with shutters (without taking off shutters from the frame) and removing to or from site complete all as specified.

S & F pressed steel frames 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S & F 35 mm thick factory made plain shutters second class hardwood rails and style, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick well seasoned second class hardwood glazed and skeleton shutter open rebated and prepared to receive glass/gauge without sash bars edge of framing plain chamfered or round, fitted with cut and mitred bends for securing glass gauge etc provided with styles and rails etc size of member of shutters with antifungal and antitermite preservation as per IS as specified in SSR part-I Sec-8 clause 8.24(a) fitted to chowkhats complete all as specified.

S & F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed

M&L for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (i) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (ii) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (iii) MS Tower bolt 150mm long - 2 No per leaf (iv) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (v) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (vi) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf . (vii) 8 mm square guard bar, 10 cm centre to centre. (viii) 40x6 mm flat iron all around for joint of both frame. (ix) stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples & 3mm thick, sheet glass ordinary quality and glazing with oil putty .(x) Two coat of synthetic enamel paint to MS window and guard bar , Incl taking down old steel / wooden window and making good dismantled portion with PCC 1:2:4 type B0 incl hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed by Engineer-in-charge.

S&F powder coated (minimum thickness of powder coating 50 micron) aluminum frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc including making good of existing jambs complete all as specified and directed

S&F powder coated (minimum thickness of powder coating 50 micron) aluminum window and ventilator shutters, side hung type without sash bars, aluminum sections weighing 0.55Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, powder coated aluminum fittings such as peg stays 150mm long (01 No) hinges type B 21 100mm long (02 Nos) suitable handle (1 No) etc complete all as specified and directed

Anodised aluminium grill (anodised transparent or dyed to required shade according to IS 1868 with minimum anodic coating of grade AC 15) of approved design/pattern with approved standard section and fixed to the existing window frame with CP Brass/SS screws @200 mm c/c including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engr-in-Charge

S&F 4mm thick figured glass pin head type and glazing with oil putty in squares nexc 0.5sqm in each pane

S&F 4mm thick figured glass pin head type and glazing with oil putty in squares exc 0.5sqm in each pane

S&F aluminum alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum wire staples

S & F mild steel framed work such as grills, grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

M & L for 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work, including teak wood lipping 19 x 6mm thick fixed with nails complete all as specified and directed.

S&F 30mm wide Continuous (piano) hinges, mild steel, bright finish or electrogalvanised fixing to wooden frame complete all as specified and directed.

S&F 100mm long fancy type Brass handles, cast type, polished bright complete all as specified and directed.

S&F magnet catcher fixed in cabnet shutter (one portion) and wooden frame (other portion) with screw complete all as specified and directed.

M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one priming coat of pink primer complete all as specified & directed.

M & L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a priming coat of red oxide zinc chrome primer complete all as specified and directed.

S & F sheet glass, 3 mm thick ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane complete all as specified and directed

S & F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed tinned tacks, or galvanised wire staples complete all as specified and directed.

S & F 150 mm aluminium handles, cast type, anodised complete all as specified and directed.

S & F 100 mm aluminium handles, cast type, anodised complete all as specified and directed.

S & F 200 mm aluminium anodised, barrel, tower bolts of extruded section fixed complete all as specified and directed.

S & F 100 mm aluminium anodised, barrel, tower bolts of extruded section fixed complete all as specified and directed.

S & F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S & F 100 mm butt hinges, medium weight cold rolled mild steel, complete all as specified and directed.

S & F 75 mm butt hinges, medium weight cold rolled mild steel, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed (reglazing shall be measured separately)

S & F except sheet glass, any thickness ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane complete all as specified and directed

S & F figured glass, 4 mm thick pin head type and glazing with oil putty in square not exc. 0.5 sqm in each pane complete all as specified and directed

S & F in repairs sheet glass, 3 mm thick ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane complete all as specified and directed

S & F in repairs galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed tinned tacks, or galvanised wire staples complete all as specified and directed.

M&L cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc of capacity exc. 250 & not exc. 500 ltrs complete all as specified and directed

M&L cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc of capacity exc. 500 & not exc. 1000 ltrs complete all as specified and directed

S & F in repairs 20 mm bore dia of pipe ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Min weight 210 gms) of approved make complete all as specified and directed

S & F in repairs bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore pipe complete all as specified & directed.

S & F in repairs bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore pipe complete all as specified & directed.

S & F in repair 15 mm bore dia of pipe fancy type bib taps, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs stop valve, 15 mm bore dia cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified & directed.

S & F in repairs 15 mm dia pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed

S & F in repairs 15 mm dia pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed

M & L for taking up or down steel tubing and connections 15 mm bore incl cleaning for refixing or removal to store complete all as specified and directed.

M & L for taking up or down steel tubing and connections 20 mm bore incl cleaning for refixing or removal to store complete all as specified and directed.

S & F steel water tubes 15 mm bore (concealed), medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F steel water tubes 20 mm bore, medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

S & F in repairs vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anti syphonage pipe, etc., complete including making good to floor complete all as specified and directed.

S & F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed

S & F 100 mm bore of cast iron pipe trap 'P' or 'S' type complete all as specified and directed

S & F in repairs vitreous china urinal, bowl type flat back, size 465 x 355 x 265 mm white (minimum), includind poviding and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws , pointing around urinal back in cement with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed

S & F in repairs 125 mm brass chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S & F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.

S & F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S & F in repairs vitreous china wash basin, white, flat back, size 550 x 400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets incl 32 mm waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S & F in repairs vitreous china wash basin, white, flat back, size 450 x 300 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets incl 32 mm waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S & F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm long complete all as specified and directed.

S & F in repairs sinks with drainage board made of stainless steel 1.0 mm thick kitchen with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S & F in repair Grating doom 100 mm dia of PTMT (Min weight 25 gms) complete all as specified and directed

S & F in repairs Grating doom 125 mm dia with waste hole of PTMT (Min weight 40 gms) complete all as specified and directed

S & F in repairs curtain Harrison rails, mild steel, chromium plated 18-20 mm dia with fixing brackets, stops, rollers etc,. complete all as specified and directed.

S & F in repair 32 mm waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S & F in repair 40 mm waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S & F in repairs 32 mm PVC flush pipes of polyethylene of low or high density for low level cistern to padestal pan including all joints complete all as specified and as directed

S & F in repairs 32 mm PVC flush pipes of polyethylene of low or high density for low leve cistern to squatt pattern closet including all joints and making good to floor complete all as specified and as directed

S & F in repairs 15 mm brass chromium plate mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed

M & L for dismantling of water tank of capacity exc 250 and not exc. 500 litres and removing to store and supply and fixing of 500 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top & FDA approved, tripple layer body, 100% UA stablised, rust proof) hoisted and fixed in position all as specified in SSR Part-I, complete, all as specified and as directed. Note : Water storage tank shall be White and screwed lid

M & L for dismantling of water tank of capacity exc 500 and not exc. 1000 litres and removing to store and supply and fixing of 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top & FDA approved, tripple layer body, 100% UA stablised, rust proof) hoisted and fixed in position all as specified in SSR Part-I, complete, all as specified and as directed. Note : Water storage tank shall be White with screwed lid

S&F in repair 32mm dia PVC waste pipe for WHB complete all as specified and directed.

S&F in repair 40mm dia PVC waste pipe for kitchen sink complete all as specified and directed.

S&F in repairs stainless steel kitchen plate rack of size not less than 24"x31"x10", 0.63mm thick with adequate shelves all as specified and directed

S&F in repairs Vitreous China wash down two piece water closet pan (padesal pattern) incl soft close seat cover and twin flush fittings incl complete fixing accessories in repairs

S&F in repairs Viterous China one piece wash basin with integrated half pedestal white, size 550x485 including complete fixing accessories fixed in repairs

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floor, paving not exc. 15 cm thickness (below or above ground level) complete all as specified and directed

M & L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing incl screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:4 complete all as specified and directed.

M & L for machine cut kota stone slab 18-20 mm thick in riser of steps, skirting, dodo and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing incl screed plaster of 10 mm thick on fair faces of brick work in CM 1:4 complete all as specified and directed.

M & L marble work 18 to 20 mm thick (table rubbed and polished) as border strips of 150mm thick in floors etc. in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Makrana White including screed bed of 20 mm thick in cement mortar 1:4 complete all as specified and directed.

M & L for 75 mm thick cement concrete 1:4:8 type D 2 (40 mm graded aggregate ) as in sub base, finished even and rough to receive the topping layer complete all as specified and directed

M & L for glazed ceramic coloured tiles in vertical surface 300 x 200 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:3 for receiving tiles complete all as specified and directed.

M & L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over screed bed or bedding layer of mortar 20 mm thick of cement plaster (1:6) complete all as specified & directed.

M & L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over screed bed or bedding layer of mortar 20 mm thick of cement plaster (1:6) complete all as specified & directed.

M & L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 20 mm thick in CM 1:6 complete all as specified and directed

M & L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in vertical surface etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick in CM 1:3 complete all as specified and directed

M & L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L for glazed ceramic coloured tiles in vertical surface 350 x 250 x 7 mm/450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:3 complete all as specified and directed

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including racking out joints , hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M & L rendering 15 mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces finished fair and even (using water proofing compound) complete all as specified and directed. Note : WPC shall be measured and paid separately)

Supply only integral water proofing compound complete all as specified and directed.

M & L rendering 10 mm thick cement plaster 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M & L rendering 5 mm thick cement plaster 1:3 on fair faces of brick work or concrete ceiling surfaces finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for preparing plastered new surface of wall and applying three coats of white washing on undecorated surface on walls complete all as specified and directed

M&L for preparing plastered new surface of wall and applying one coat of primer on plastered surfaces with alkali resistant priming paint and applying two coats with distemper oil emulsion, white or tinted complete all as specified and directed

M&L for preparing plastered new and undecorated surface of walls, applying chalk whiting on plastered surface preparatory to distempering and distempering walls with two coats of cement base paint white or tinted complete all as specified and directed

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc., including cleaning or refixing or removal to store complete all as specified and directed

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S & F 110mm bore PVC (SWR) bends of any radius, complete all as specified

S & F 75mm bore PVC (SWR) bends of any radius, complete all as specified

M & L 100 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F for 25 mm dia decorative/fancy type stainless steel curtain rod with brackets and knobs at both ends as per site requirement incl taking down old existing pipes with accessories complete all as specified and directed. Note: the cost of brackets and knobs is deemed to be incl in the quoted rate.

S&F 300 mm ordinay rat tail rod pattern springs incl roller and rabber plate fixed to chowkhats in repairs incl necessary welding if reqd. complete all as specified and directed.

S&F aluminum (die cast) body door closer hydraulically regulated, designation No 1 universal type, suitable for door shutters upt o700mm in width and of weight not more than 35 kg and fixed complete all as specified and directed.

Deduct Schedule of Credit of Rs. (-) 51435.00 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount Note: Tenderers will not quote against this item being a firm amount.

NARESH KUMAR KHAJURIA

MandeepConstructionCo

DAVINDER SINGH

MAHADEV ENTERPRISES

M/S SHUBAM ENGINEERS