BOQ for Special Repair / Renovation of Sub Health Centre at Village Jakhwala In District Kurukshetra (Under health Wellness Centre Scheme) (Excluding EI)

Amount

Dismantling brick work, tile masonry or tile lining & tile tracing. (b) In Cement (HSR 8.5 (b)

Dismantling cement conglomerate/ terrazzo floors 25 mm to 50 mm thick i/c concrete base (HSR 8.25 )

Scraping White & Colour wash (HSR 8.32 (a))

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in foundation & plinth. (HSR 10.41)

Cement concrete 1:1.1/2:3 with stone aggregate 20 mm nominal size in foundation and plinth (HSR 10.42)

Providing and laying 80 mm thick ISI marked interlocking paver blocks conforming to IS 15658:2006 /IRC:SP:63-2004 of all Shapes and colours in design mix cement M-40 over a bed of 30 mm thick fine sand complete in all respect. (HSR 10.159).

First class brick work laid in cement sand mortar 1:4 in first storey up to 4 meters above plinth level.(HSR 11.9)

Terracing consisting of tiles 22.86 cm X 11.43 cm X 3.81 cm, laid over 87.50 mm mud filling, on a layer of 25 mm mud plaster and an other layer of mud mortar for laying the tiles including two coats of bitumen laid hot at 1.65 kg per sqm on top of RCC slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc. (HSR 13.13)

Providing & Fixing 100 mm PVC Rainwater Pipe 6 kg. pressure of ISI mark in cement mortar during masonry work. (a) 100 mm dia PVC pipe 6 kg. pressure. (Make Supreme, Phinolex, Prince or equvalent)(HSR-13.89 (a))

Plastering on walls 12 mm thick cement plaster 1:4 (HSR 15.5)

15 mm thick cement plaster 1:4 on the rough side of single or half brick wall (HSR 15.10)

Painting two coats with synthetic enamel paint in all shades on old wood-work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.(HSR 16.5)

Distempering with washable oil bound distemper (of approved manufacture ) two coats over one priming coats on new work. (HSR 16.58)

Providing two coats of exterior acrylic emulsion paint (b) 1st quality (HSR 16.79 (b)

Providing and applying two coats white cement based putty over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete (JK/Birla Make) (HSR 16.81)

Supplying & fixing glass panes including special metal sash putty of approved make (b) glass panes 4 mm thick, exceeding 40sq dm areas. (HSR 18.30 (b) )

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (as approved by the Engineer-in-charge) EUROPEAN TYPE WATER CLOSET SUIT, SYPHONIC TYPE, consisting of- VITREOUS CHINA WARE SYPHONIC SUITE WITH 15 LITRES CAPACITY MATCHING CHINAWARE CISTERN and all internal brass fittings COMPLETE WITH ‘P’ or ‘S’ TRAP with or without vent; (as approved by the Engineer-in-charge). One Piece SEAT AND LIDIN HOLLOW BLACK OR WHITE PLASTIC fitted with chromium plated hinges and rubber buffers,(to the approval of the Engineer-in-charge). COMPLETE in all respects INCLUDING CUTTING AND MAKING GOOD THE WALLS AND FLOORS. (b) Double trap syphonic (ii) Single Color. [HSR 30.5 (b) (ii)].

Providing and fixing in position best Indian make (Ordinary) lavatory suites consisting of Lavatory in vitreous chinaware size as given below ( to the approval of the Engineer-in-Charge) including China plug for tap hole where necessary R.S. or C.I. brackets for building into wall including painting; 32mm C.P. Brass waste with C.P. brass chain and rubber plug. 15mm C.P. Brass screw down pillar tap with jamnuts or couplings best design(as approved by Engineer-In-Charge) All fittings best Indian make and to the approval of the Engineer-in-Charge. All fittings best Indian make and to the approval of the Engineer-in-Charge. All brass work chromium plated and complete in all respects including cutting and making good the walls floors and painting of fitting etc white, (iv) Size 550mm x 400mm with one no. tab (HSR- 30.41 (a) (iv)

PROVIDING AND FIXING IN POSITION 32MM DIA.G.I.WASTE PIPE EMBEDDED IN WALL or lead waste pipe (weighing 3.47kg. per metre and 2.8 mm thick) upto floor level including cost of wipped solder joint etc., complete (as required by the Engineer-in-charge) [HSR 30.48].

Providing and fixing in position best Indian make Soap dish fixed into wall with C.P. brass screws and complete in all respects including cutting and making goods the walls etc. (a) C.P. Brass (i) Soap dish Large. [HSR 30.70 (a) (i)].

Providing and fixing in position 15mm i/d C.P. brass bib cocks of best quality (as required by the Engineer-in-charge). [HSR 30.75]. (a) Bib cock long body.

Providing & fixing in position C.P. brass stop cock (as approved by the engineer-in-charge). (a) 15 mm Stop cock. (ii) Concealed stop cock with flange. [HSR 30.76 (a) (ii)].

Providing and fixing in position automatic brass ball valves in tanks. (b) With Plastic Ball (ii) 20 mm internal diameter. [HSR 30.110 (b) (ii)].

Providing and Fixing HDPE WATER STORAGE TANKS of Sintex, Diplast, O.K. Supreme make with covers/lids marked with IS:12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow and scour provisions with suitable plug on scour pipe including cost of nipples, washers flages for connections in tanks complete in all respects to the satisfaction to the Engineer-in-Charge. [HSR 30.119]. 1000 Ltrs. Capacity Water Tank

Providing and laying 200 mm thick granular sub base consisting of drainage layer confirming to Table 400.1 Grading –VI of MORT&H 5th edition, mixing in a mechanical mix plant at OMC, carriage of mix material to the site of work, spreading in uniform layer with motor grader on prepared surface and compacting with vibratory power roller to achieve desired density complete as per clause No.401 of MORT&H specifications for road & bridge (5th Revision) of 2013. (NS).

Recovery Items:- Good Tiles, Reserve Price @ Rs. 5 /- Each

Tiles Bats, Reserve Price @ Rs. 500/- Cum

The Maanya Cooperative Labour and Const society Ltd