Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.3 LAccepted-AOC | L1 | Accepted-AOC Lowest rate quoted | |
| 2 | L2₹25.9 L+₹2.9 L (12.6%)Rejected-AOC | L2 | Rejected-AOC Higher rate quoted than L1 | |
| 3 | L3₹26.9 L+₹3.9 L (16.8%)Rejected-AOC | L3 | Rejected-AOC Higher rate quoted than L1 | |
| 4 | L4₹31.8 L+₹8.8 L (38.2%)Rejected-AOC | L4 | Rejected-AOC Higher rate quoted than L1 | |
| 5 | L5₹34.5 L+₹11.5 L (50.1%)Rejected-AOC | L5 | Rejected-AOC Higher rate quoted than L1 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
25 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2023_MES_583026_1
8400-931/E8
Open Tender
Electrical and Maintenance Works
Works
180 days
PANAGARH
Class D and Category b (i) (Low Tension Electric Works (upto 1100 Volts))
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹90,000
Yes
6 Apr 2023
25 Feb 2023
27 Mar 2023
25 Feb 2023
25 Mar 2023
11 Mar 2023
Amount
Taking down carefully aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified and directed.
M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade min thickness 1.8 mm, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers or modular cover plate with frame of suitable size and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/ cutting and making good the existing surface)
All as per item No 2.00 mentioned here-in-above but One 3 pin 5 Amps socket out let points on independent board complete all as specified and directed
All as per item No 2.00 mentioned here-in-above but 5 Amp socket on same board with other switches complete all as specified and directed.
M&L for wiring for socket out let on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers or modular cover plate with frame of suitable size and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLSH cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/ cutting and making good the existing surface)
M&L for point wiring for light point/ fan point one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including suitable size PVC casing and caping (ISI marked) , including terminal switch boxes PVC (ISI Marked) and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/ cutting and making good the existing surface)
All as per item No 6.00 mentioned here-in-above but One 3 pin 5 Amps socket out let points on independent board complete all as specified and directed
All as per item No 6.00 mentioned here-in-above but 5 Amp socket on same board with other switches complete all as specified and directed.
M&L for point wiring for one socket outlet on independent board controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated Unsheathed FRLSH cables in and including suitable size PVC casing and caping/ conduit (ISI marked), including terminal switch boxes PVC (ISI Marked) and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor, PVC insulated unsheathed FRLSH cable as earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/ cutting and making good the existing surface)
S&F modular switch 1 way 6 A, 1 module complete all as specified and directed.
S&F modular socket 6 A -2/3 pin combined, 2 Module complete all as specified and directed.
S&F Modular Switch socket Combination 16A, 6 pin, 3 module complete all as specified and directed.
S&F Modular Fan stepped regulator, 120 W, 2 Module complete all as specified
S&F switch piano flush type, single pole , 6 Amps, one way complete all as specified and directed.
Fixing only switches of any type complete all as specified and directed. (Material obtained from Ser item No 01)
S&F switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified and directed.
Refixing only 2 in 1, 5 Amp Switch socket Combination complete all as specified and directed. (Item obtained from Ser No 1)
S&F socket outlets 2 in 1, 5/6 Amps flush type 230/240 V complete all as specified and directed. ( For Same Board only)
S&F in repair switch socket combination 2 in 1 , 6 pin , (16 Amps ) flush type controlled by one switch complete all as specified and directed.
S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed.
Fixing only ceiling rose any type complete all as specified and directed. (Material obtained from Ser item No 01)
S&F stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified and directed.
S&F Bell push , flush type , 5 amp complete all as specified and directed.
S&F Ding dong, AC 230 Volts, single pole 230 volts all as specified and directed.
S&F lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fittings complete all as specified and directed.
S&F in repair two single core, 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC conduit (ISI marked), concealed, including 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
S&F in repair two single core, 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC casing and caping/conduit (ISI marked) including 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
S&F in repair two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC casing and caping / conduit (ISI marked) including 6 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
S&F in repair 18 W LED light fitting wall mounted batten 4'ft , minimumm lumen output 100 lumen/Wat, extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6000K including necessary connection complete all as specified and directed. (Make: CG/Bajaj/ Philips/Havells/Magic/Jaguar).
S&F in repair recessed mounted 2' x 2 ' LED luminaire 36 watts for grid ceiling minimumm lumen output 100 lumen/Watt, pre-treated CRCA frame powder coated with diffused Profied including necessary connection complete all as specified and directed. (Make: CG/Bajaj/ Philips/Havells/Magic/Jaguar)
S&F in repair LED strip 24 W 3K rope light warm white light 5 mtr long, uniformity, Environmental friendly, ultra modern, energy saving, LED luminaire comprising of high brightness LEDs, 3000K complete with suitable Driver all as specified and directed. (Make: CG/Bajaj/ Philips/Havells/Magic/Jaguar)
S&F in repair 12 watt warm round type surface mounted LED light fitting Environmental friendly, ultra modern, energy saving, LED luminaire comprising of high brightness warm light LEDs complete all as specified and directed. (Make: CG/Bajaj/ Philips/Havells/Magic/Jaguar)
S&F in repair security light fittings 25 watts, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete including 25mm dia light grade GI bracket with nut bolt and clamp complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as specified and directed. (Make: CG/Bajaj/ Philips/Havells/Magic/Jaguar)
S&F in repair 12 W recessed mounted round LED downlight, aesthetically designed aluminium die-cast enclousers, with seperate replaceable constant current driver 12 watts for grid ceiling, including necessary connection complete all as specified and directed. (Make: CG/Bajaj/ Philips/Havells/Magic/Jaguar)
S&F in repair 120 Watt LED High Bay light fittings complete all as described here-in-below:- (i) Total system lumen not less than 16800 lumens. (ii) High pressure die cast aluminium. (iii) IP rating :- IP 66 (iv) Front cover : IP lens Plate. (v) Mounting :- Suitable on mounting angle Iron frame on the Roof with suitable size bracket (vi) Finish :- Epoxy powder coated with any additional treatment for smooth and anti corrisive finish. (vii) Lamp :- High bright LED with Lens. (viii) System efficacy (lm/W) of the luminaries :- Not less than 140 lm/watt. (ix) Colour temperature :- Not less than 5700K (x) Colour rendering Index (CRI) Not less than 70 (xi) Life : Not less than 50000 Hrs of opreation (xii) Optices :- Spread (Beam angle along the driveway)- 120degree, Through( Beam angle across the drive wat)- 60 degree, Beam pattern - Asymmetical driveway (xiii) Control gear:- Inbuilt electronic driver, PF not less than 0.90 and TDH less than 20% with operating voltage 140-280V AC, 50 Hz. (xiv) Surge protection :- Inbuilt surge protection minimum 5 KV, and external 10 KV (xv) Heat Sink :- As per OEMs design.
S&F in repair wall mounted type decorative light fitting 1 x 09W LED 6k 230V AC, 50Hz complete with all accessories complete all as specified and directed. (Make: CG/Bajaj/ Philips/Havells/Magic/Jaguar)
S&F in repair mirror light fitting LED 5 Watt complte with all accessories all as specified and directed. (Make: CG/Bajaj/ Philips/Havells/Magic/Jaguar)
S&F in repair Vertical distribution board (VTPN) double door TPN 6 way with IP 43 multiphase outgoing suitable for mounting 100 Amps as incomer with Bus bars, Neutral links complete with all accessories complete all as specified and directed. (Make: C & S/ L & T/ Legrand /ABB)
S&F in repair Vertical distribution board (VTPN) double door TPN 4 way with IP 43 multiphase outgoing suitable for mounting 100 Amps as incomer with Bus bars, Neutral links complete with all accessories complete all as specified and directed. (Make: C & S/ L & T/ Legrand/ABB)
S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral 240 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed. (Make: C & S/ L & T/ Legrand/ABB)
S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed. (Make: C & S/ L & T/ Legrand/ABB)
S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door, Triple pole and neutral 415 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed. (Make: C & S/ L & T/ Legrand/ABB)
S&F in repairs MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs including necessry connection complete all as specified and directed. (Make: C & S/ L & T/ Legrand/ABB) (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).
S&F in repairs MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Make: C & S/ L & T/ Legrand/ABB) (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).
S&F in repairs MCB TPN 63 Amps, 'C' series 10kA, 415 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Make: C & S/ L & T/ Legrand/ABB) (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).
S&F MCCB of 4 pole , 415volts of capacity 63 Amps with breaking capacity of 16 KA Fixed thermal and fixed magnetic setting including necessry connection complete all as specified and directed. (Make: C & S/ L & T/ Legrand/ABB) (Note :-Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).
S&F MCCB of 4 pole , 415volts of capacity 100 Amps with breaking capacity of 16 KA Fixed thermal and fixed magnetic setting including necessry connection complete all as specified and directed. Note :-Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating. (Make: C & S/ L & T/ Legrand/ABB) (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).
M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth wire electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. (Note : (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. (ii) Testing to be carried out by the contractor in presence of Engr- in- Charge , entered in the eath testing register, prepared and to be maintained by the contractor & submited to Concerned JE E/M. (iii) T&P and testing instrument(Meger) to be provided by the contractor at own cost).
Taking down unservicable of ceiling fan, Exhaust Fan, Air circulator, wall Fan of any type/ size/ Make/ Model for inspection for repairing action and deposite to E/M store yard complete all as specified and directed. (Note: Cost of spair parts for repair shall be measured and paid seperatly)
Hanging/Fixing only ceiling fan/ exhaust fan/ air circulation fan/ wall mounted fan etc after necessary repair/ painting complete all as specified and directed. (Note: (i) Cost of spair parts for repair and painting shall be measured and paid seperatly. (ii) The cost of oiling/ greasing/ replacement of rubber bush/hanging clamp etc as required are deemed to be included in the item rate).
Repair to unservicable ceiling fans, exhaust fan unscrewing nut and bolts etc and to change unservicable items for replacement including shifting of fans to workshop for overhauling, including replacement of unservicable bush/ bearing/ capcitor/ rewinding of coils with super enameled copper conductor of approved make as per existing guage of wire and numbers of turns per coils accessible to bring smooth functioning of the ceiling fan, exhaust fan etc complete all as specified and directed. (Note: Cost of bearing, bush, capacitor, enamelled copper conductor coil for winding shall be measured and paid separately).
S&F of 1.5 Mfd Capacitor for Fan including taking out old unservicable one complete all as specified and directed. (Make: Havells/Usha/CG)
S&F of 2.5 Mfd Capacitor for Fan including taking out old unservicable one complete all as specified and directed. (Make: Havells/Usha/CG)
S&F of 3.15 Mfd Capacitor for Fan including taking out old unservicable one complete all as specified and directed. (Make: Havells/Usha/CG)
S&F of Bearing of size 6202 for Fan including taking out old unservicable one complete all as specified and directed. (Make: SKF/NBC/ARB)
S&F of Bearing of size 6201 for Fan including taking out old unservicable one complete all as specified and directed. (Make: SKF/NBC/ARB)
S&F copper conductor for rewinding of the coil of ceiling Fan/ Pedstal Fan / cabine Fan/ Wall Fan/ Exhaust Fan etc. with super enamelled copper conductor, turn per coil, gauge with existing type including varnish for winding complete all as specified and directed.
S&F gun metal bushes of any sizes for Fan any type/ size/ make/ model including taking out old unservicable complete all as specified and directed.
M & L for painting of ceiling fan/ exhaust fan /pedestal fan/ cabine fan complete with one coat of white synthetic enamel paint by spraying including filling cavities with fillerr after cleaning all dust etc including writing MES No (in block capital letter) with black paint etc complete all as specified and directed.
S&F in repair of down rod heavy duty 15 mm dia , 2ft long for hanging of ceiling fan and fixing complete including joist of suitable size, bolts & nuts, washers, 2 nos rubber insulator including drilling hole as required all as directed by the Engr-in-Charge.
S&F in repair MS clamp made of flat iron size 25 x 6 mm including nuts, bolts and 'S' hook.
S&F PVC Exhaust fan 250 MM (minimum RPM 1250, three blades) with louvers all as specified and as directed by Engr-in-Charge. (Make: Havells/Usha/CG)
S&F PVC Wall fan 400 MM (minimum RPM 2100, three blades) all as specified and as directed by Engr-in-Charge.
S&F PVC Pedastel fan 400 MM (minimum RPM 1300, three blades) with stand all as specified and as directed by Engr-in-Charge.
S&F in repair PVC empty transparent lid door Box of Size (600x600x170 mm), IP-65 suitable for fixing existing energy meters with gland all as specified and as directed by Engr-in-Charge. Make : Hensel/ Sintex and Equivalents
ANSH CONSTRUCTION
BISWAS ENTERPRISE
M/S SAIMON ENGINEERING
CHANDRA CONSTRUCTION AND CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .