Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹3.0 LAdmitted-Finance 0 BUDKIYA DEVATRA JODHPUR RAJASTHAN 342606 | JODHPUR | RAJASTHAN | 342606 | -22.24% | ₹3.0 L | L1 | Admitted-Finance |
| 2 | L2₹3.1 L+₹2,848.88 (0.94%)Admitted-Finance | -21.51% | ₹3.1 L+₹2,848.88 (0.94%) | L2 | Admitted-Finance |
| 3 | L3₹3.3 L+₹28,215.59 (9.30%)Admitted-Finance | -15.01% | ₹3.3 L+₹28,215.59 (9.30%) | L3 | Admitted-Finance |
| 4 | L4₹3.5 L+₹49,718.76 (16.4%)Admitted-Finance P NO 265 NEAR RAJASTHAN PATRIKA MAN JI KA HATHA PAOTA JODHPUR | JODHPUR | JODHPUR | RAJASTHAN | -9.50% | ₹3.5 L+₹49,718.76 (16.4%) | L4 | Admitted-Finance |
Tender Value
₹3.9 L
EMD Value
₹7,800
Closing Date
8 Aug 2026, 6:00 pmClosed
EE PWD DN JAYAL
EE PWD DN JAYAL
Repair and maintenance work of Circle Office Administrative Building, Jayal.
2026_CEPWD_580908_2
NIT No 05 of 2026-27 EE PWD DN JAYAL
Open Tender
Civil Works
Percentage
30 days
JAYAL
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
EE PWD DN JAYAL, MD RISL JAIPUR
₹7,800
Yes
12 Aug 2026
1 Aug 2026
10 Aug 2026
1 Aug 2026
8 Aug 2026
1 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing of wall paneling on grid made out of PVC profile section of size 21x17mm with a wall thickness of 1.5mm+/-0.2mm,fixed on the existing wall with wood screw of size 50mm X 8mm with rowel plug at a spacing of 900mm center.uPVC profile section of size 150mm X 10mm with a wall thickness of 1.0mm+/-0.2mm to be fixed on the grid by self tapping screw of size 19mm X 6mm.Necessary cutouts for electrical connection to be provided at required places. The edge and periphery, finally to be covered by extruded PVC beading section of size 28mm X 12mm with a wall thickness of 1.0mm+/-0.2mm complete as per manufacture’s specification and direction of Engineer-in-charge.
. | 13.86 | Sqm | 1,394 | ₹19,320.84 |
| 2 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) | 200.08 | Sqm | 235 | ₹47,018.8 |
| 3 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete .
Old Plastered Surface (two or more coats) | 631.04 | Sqm | 46 | ₹29,027.84 |
| 4 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:
Old work (One or more coats ) | 631.04 | Sqm | 40 | ₹25,241.6 |
| 5 | Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision
Old Work | 1,493.01 | Sqm | 50 | ₹74,650.5 |
| 6 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
One or more coats on old work. | 39.6 | Sqm | 34 | ₹1,346.4 |
| 7 | S&f fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by Aluminium beading 20x3mm with suitable screws not exceeding 150mm distance at all heights with all lead and lift with scafolding. | 22.5 | Sqm | 925 | ₹20,812.5 |
| 8 | Random Rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in :Cement Mortar 1:6 ( 1-Cement : 6-Sand). | 13.95 | Cum | 3,479 | ₹48,532.05 |
| 9 | Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :
20mm thick . | 62 | Sqm | 202 | ₹12,524 |
| 10 | Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately).
For fixed portion
Powder coating aluminum ( minimum thickness of powder coating 50 micron) | 80 | Kg | 351 | ₹28,080 |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.46 MB
BOQ_1032274.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .