Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
₹5 L
EMD Value
₹10,000
Closing Date
7 Oct 2020, 4:00 pmClosed
Executive Engineer SKIMS MCH Bemina
Executive Engineer SKIMS MCH Bemina
Annual maintenance contract for Sanitary and Plumbing works Stage contract for the year 2020-2021 upto ending March 2021.
2020_SKIMS_105704_1
SKIMS_WDB_04 0f 2020 Dated 26.09.2020
Open Tender
Civil Works
Item Rate
365 days
Camp Office of the Chief Engineer SKIMS MCH Bemina
Please refer Tender documents.
7 documents required · 7 mandatory
₹200
Yes
Chief Accounts Officer SKIMS MCH Bemina
₹10,000
Yes
2 Nov 2020
29 Sept 2020
10 Oct 2020
29 Sept 2020
7 Oct 2020
29 Sept 2020
Amount
Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 150mm sand cast Iron/PVC trap, 10 litre low level P.V. C. flushing cistern including C.P/PVC flush pipe (of approved make) "manually controlled device (handle lever), with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Stainless Steel Orissa pattern W.C. pan of size 585x480mm integrated type foot rests. 150mm dia. outlet.
100mm dia. outlet.
Providing and fixing of heavy –duty PVC ball cock with 30 cm Aluminium rod and ball complete including removing of old damaged one wherever required. 15 mm dia.
20mm dia.
25mm dia.
Providing and fixing flushing Kit complete in all respects in PVC flush Tanks (Compact one ) including replacing old damaged kit & making connection with water supply (Flushing kit of standard make).
Providing and fixing of C.P brass Waste for wash basins heavy duty of standard make. (32mm dia.)
Providing and fixing of C.P brass Waste for steel sink heavy duty of standard make. (40mm dia.)
Providing and fixing of C.P brass basin mixer Parko/jaquar make including old damaged one wherever required (heavy duty) including removing PVC connections. 15mm dia.
Providing and fixing of C.P brass Wall mixer Parko/Jaquar make including removing of old damaged one wherever required (heavy duty) with PVC connections. Double hole 15mm dia including cost of CP Cups and requisite CP nipple.
Providing and fixing of C.P brass sink mixer Parko or equivalent make including removing of old damaged one wherever required (heavy duty) C.P Nipples wherever required detachable including PVC connections. Double hole 15mm dia.
Providing and fixing of brass spindle (heavy type) for mixer, bib cocks & angle valves of standard make including removing of old damaged one.
Providing and fixing of PVC Tank lids with locking Arrangement complete in all respects to 1000litre/ 2000litre/5000litre capacity (overhead PVC tanks in attic floor).
Providing and fixing of Polyvinyl Chloride pipes (B-type) of standard make (ISI mark quality) for sewerage disposal system including fixing the pipe with clamps/stays or in trenches including excavation & refilling of trenches and jointing of pipes with Teflon tape and adhesive including dismentling of existing damaged pipes.( Work to be executed in foul conditions also wherever required). 50mm dia.
75mm dia.
100mm dia.
150mm dia.
Providing and fixing of PVC fittings (B-type) of standard make (ISI mark quality) for sewrage disposal system with necessary washers /Teflon tape and adhesive including removing of old damaged fittings.
A.) DOOR BENDS.
B).FLOOR TRAP
C).PLAIN JUNCTION
D). REDUCER
75MMX50MM
100MMX75MM
100MMX150MM
E) . COWL.
F). P-TRAP
G).HOLDER/STAYES
H).COLLAR
I)PVC PLAIN BEND
J).PVC REDUCING JUNCTION
K).OFF-SET
Providing and fixing of C.P brass long bend ISI mark and of approved quality 32mm dia complete including removing of old existing damaged bend, repairs to floor (complete job).
Providing and fixing of brass ball valve of ISI mark heavy duty of the following nominal bore including removing of Old wherever required. Single turn. 32mm dia.
40mm dia
50mm dia
75mm dia.
100mm dia
Providing and fixing of G.I assorted fittings of following nominal bore/dia of ISI mark heavy quality including dismantling/removing of old/damaged fittings wherever necessary.
15mm dia
(a) Socket
(b) Elbow
(d) Plug
(e) Tank Nipple
20mm dia
(a) Socket
(b) Elbow
(d) Plug
(e) Tank Nipple
25mm dia.
(a) Socket
(b) Elbow
(d) Plug
(e) Tank Nipple
32mm dia
(a) Socket
(b) Elbow
(d) Tank Nipple
40mm dia
(a) Socket
(b) Elbow
(d) Tank Nipple
50mm dia
(a) Socket
(b) Elbow
(d) Tank Nipple
Providing and fixing of G.I Reducer of standard make. (a)20mmx15mm
(b) 25mmx15mm
(c) 20mmx32mm
(d)25mmx40mm
Providing and fixing of G.I Reducing Elbow of standard make. 20mmx15mm
(b) 25mmx15mm
(c) 20mmx32mm
(d)25mmx40mm
Providing and fixing of G.I Reducing Tee of standard make. 20mmx15mm
(b) 25mmx15mm
(c) 20mmx32mm
(d)25mmx40mm
Providing and fixing of C.P brass Nipple 15mm dia of required size ISI mark heavy duty(Male/Female type). 50mm long
75mm long
100mm long
150mm long
Providing and fixing of C.P. brass towel rail of approved quality and ISI Make including cost of rawl plugs and screws etc. 450mm (20mm dia of rod).
600mm (20mm dia of rod).
Providing and fixing of C.P. brass gratings heavy duty Including repairing of floor complete and dismantling old damaged gratings. 100mm dia.
Providing and fixing of C.P. brass (surgical) elbow action mixer 15 mm dia. with double hole (Parko or equivalent make). Sideways action.
Providing and fixing of C.P PVC health faucet Parko/jaquar make complete With bracket, holder & pipe 1.50metre long.
Providing and fixing of C.P brass health faucet Parko/jaquar make complete With bracket, holder & pipe 1.50metre long.
Providing and fixing of C. l. manhole cover with frame (light duty) 455x610mm. internal dimensions, of standard make & weight not less than 20 Kgs.
Providing and fixing of precast R.C.C Slab in mix M20(manhole covers) of thickness not less than 75mm including cost of reinforcement 10mm dia both ways at rate of 75mm c/c and cost of M.S handles for Lifting/placing complete job. 600mmx600mm
450mmx450mm
Providing and fixing of PVC Bib cock 15mm dia of standard make (Prince/Prayg) Complete Job.
Providing and fixing of M.S flanges of different dia’s including cost of M.S nuts, bolts, washers & welding complete job.
Providing and fixing foam insulation 8mm thick of standard make to G.I Water circulation/ distribution net work including wrapping of foam insulation with polythene sheets including cost of P VC adhesive Tap and binding wire complete job. 15 mm dia.
20 mm dia.
25 mm dia.
32 mm dia.
40 mm dia.
50 mm dia.
Providing & fixing C.P Brass leg pair to C.P Brass wall mixer/basin mixer/sink mixer (15mm dia.)
Providing & fixing of M.S pipes of different dia. of standard make including laying in trenches, earth work on excavation refilling, welding (excluding cost of flanges, nuts & blots) complete job.
Providing and laying of dry stone soling of required size as per directions of site engineer from approved quarry in foundation on horizontal level incl .watering, ramming, loading, unloading and carriage of materials from source to site of work including cost of binding material complete job.
Providing and laying in position cement concrete specified grade excluding the cost of centering and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) including all carriages, leads & lifts complete. Crushed.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size)including all carriages, leads & lifts complete. crushed.
Providing and laying in position cement concrete specified grade excluding the cost of centering and shuttering- All work upto plinth level.(a)1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) including all carriages, leads & lifts complete. Crushed.
Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead: 1:3:6 or richer mix:
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 40mm.
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement@ 0.488 kg/sqm mixed with with water proofing cement compound @ 0.253kg/sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound@ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% of approved make in all colors and shades, laid on 20mmthick cement mortar 1:4 (1 cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete.60cmx60cm.
Providing and fixing 1st quality ceramic glazed tiles of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make colour, shades except begundy, bottle green, black of any approved by Engineer in- Charge in skirting, risers of steps and dados over 12mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing with grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (Size not less than 12"x18")
40mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1 mm to 4mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix: 7 marble chips) by volume including cement slurry etc. complete. White cement without any pigment. (a) Crushed.
Opening repairing rewinding and reinstalation of 5HP Single hole water lifting pump with all necessary fixtures/fittings complete job.
Opening repairing rewinding and reinstalation of 2HP Single hole water lifting pump with all necessary fixtures/fittings complete job.
Opening repairing rewinding and reinstalation of 1HP Single hole water lifting pump with all necessary fixtures/fittings complete job.
Providing & fixing 25mm G.I Tee (equal).
Providing & fixing 25mm G.I Nipples for G.I pipe complete job.
Providing & fixing 25x20mm G.I Nipple reducer for G.I pipe complete job.
Providing, Installing and commissioning of 1HP phase mano block Motor pump set 2880RPM (3.7KW) with all necessary fittings & fixtures including testing and removal of old damaged one complete job. (Crompton make) in water supply pump house.
Kota stone flooring laid over 20mm thick cement mortar base of 1:4mix jointed with grey cement slurry mixed with pigment to match the sade of the slab including rubbing and polishing complete with base of cement mix 20mm thick.
kota stone slab 20mm thick in risers of steps, sirting dado and pillar laid on 12mm (average thickness cement mortar 1:3 mix (1 cement :3 coarse sand) and jointed with greu cement slurry mixed with pigment to match shade of the slab, including rubbing & polishing complete.
Providing & fixing C.I Sluice valve to existing G.I pipe line including dismantling of damaged one trenching, excavation complete job. (75mm dia.).
Providing & fixing stainless steel soap case including screws etc complete job.
providing & fixing of W.C western/English type with flushing cistern (one piece) with seat cover including all fittings and fixtures complete of approved make i.e, Cera, Hindware, jaquar or equivalent.
Providing & fixing of C.P duet mixer of Jaquar or equivalent with all necessary accessories and fittings, fixtures complete job.
Providing & fixing C.I Air release valve 50mm dia. double chamber weight not less than 8 Kgs.
Providng & fixing Ductile iron pipe 150mm dia. including cutting and joining with old existing pipe line including cost of M.S sleeve/welding complete job.
GHULAM QADIR BHAT
M/S AADHITYA CONSTRUCTIONS
M/S SHOWKAT AHMAD DAR
FIRDOUS AHMAD RATHER
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .