Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L 1₹20.4 LAccepted-AOC 14 10 4TH MAIN 8TH C CROSS SRINIVASA NAGAR BSK 3RD STAGE BENGALURU 560085 | BENGALURU URBAN | KARNATAKA | 560085 | L 1 | Accepted-AOC BEING L1 | |
| 2 | L 2₹21.1 L+₹62,701.50 (3.07%)Rejected-Finance NO 9A VINAYAKANILAYA KANAKA GANAPATHI STREET OM SHAKTHI LAYOUT KANAKAGIRI HORAMAVU POST BANGALORE 560 043 | BENGALURU URBAN | KARNATAKA | 560043 | L 2 | Rejected-Finance Not L 1 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
1 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER CENTRAL BANGALORE
MILITARY ENGINEER SERVICES GARRISON ENGINEER CENTRAL AGRAM POST BANGALORE 560007
PERIODICAL SERVICES TO CERTAIN ACCOMODATION AT DOMLUR, 100 ORs, 598 ORs AND E and M INSTALLATION INCLUDING REPLACEMENT OF JOINERY AT AREA UNDER AGE B/R I IN GE (CENTRAL) BANGALORE
2022_MES_519049_2
8194E
Open Tender
Civil Works
Item Rate
272 days
GARRISON ENGINEER CENTRAL BANGALORE
PLEASE REFER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER CENTRAL BANGALORE
₹40,000
Yes
18 Jul 2022
10 May 2022
3 Jun 2022
10 May 2022
1 Jun 2022
18 May 2022
10 May 2022 - 16 May 2022
60 days
Amount
Taking down Cement Plaster of any description on Brick or Stone walls or Concrete Surfaces including Racking out Joints, hacking for Key, scrubbing down with Water, etc. complete removal of debris outside MD land.
M & L for raking out joints/ pointing to square rubble stone masonry coursed or uncoursed including cutting out decayed mortar not less than 12mm deep, washing the joints, removing rubish off the premises and keep the surfaces to be pointed wet for 2 days prior to re-pointing complete.
M & L for dubbing out on irregular faces of stone masonry walls using cement mortar 1:6, 10mm average thickness finished the surfaces to receive plastering/rendering complete.
M & L Rendering 15mm thick on faces of stone masonry in CM 1:6 surface finished even and smooth without using extra cement complete all as specified and as directed.
M & L for rendering 15 mm thick in two layer (10mm + 5mm thick) on external surfaces of stone masonry/brick work or concrete surfaces in cement mortar 1:4, mixed with water proofing compound at top 5mm thick layer by weight of cement as per manufacturer's instructions and finished the surface even and smooth without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).
M&L Rendering 5mm thick on fair faces of concrete surface of ceiling/chajjas in CM 1:3, surface finished even and surface without using extra cement.
M & L Rendering 10mm thick on fair faces of brick masonry or concrete surfaces in CM 1:6 surface finished even and smooth without using extra cement complete all as specified and as directed.
"Supply only" integral water proofing compound (ISI marked) complete all as specified and directed. (Make : Dr FIXIT/Fosroc/choksey)
Cutting/chipping the spalling concrete surfaces of columns, beams, facias, slabs, chajjas & cantilevers etc, and trimming cleaning the surfaces of any thickness all as specified and directed including M & L for applying epoxy treatment for bonding old demolished concrete surfaces and application of one coat of notozinc primer to exposed reinforcement and providing 20mm thick plastering in CM 1:4, finished even and smooth without using extra cement to level the surfaces etc including necessary csafolding as required at site complete all as specified and directed.
M & L for removing plant/Uprooting of vegetation growth including roots on wall/roof/parapet/chajja/beam/near pipes etc and applying acid treatment after removing roots for preventing regrowth and making good disturbed surfaces/area in superficial area exc 150sq.cm but n.exc 400 sq.cm and averaging depth not exceeding 10 cm filling holes etc by using PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) or 10mm thick plastering in cement mortar 1:3 as required and finishing the surfaces to match with the existing surface complete all as specified and directed.
M&L Preparation of Newly plastered surface and applying three coats of white wash on walls.
M&L Preparation of Newly plastered surface and applying three coats of white wash on Ceiling.
M&L for preparation of Newly Plastered surfaces of Wall and applying two coats of cement base paint over one coat of alkali resistant priming paint all as specified and directed.
M & L for preparing plastered surfaces of walls and applying two coats of distemper-oil-emulsion over a coat of primer over a coat of wall care putty (Two coats in minimum 1mm thick) complete all as specified and directed.
M & L Preparation of Old decorated surface and applying one coat of distemper oil bound on surface of Walls complete all as specified and as directed.
M & L Preparation of Old decorated surface and applying two coat of distemper oil bound on surface of Walls complete all as specified and as directed.
M&L complete removal of existing treatment and applying two coats of distemper oil emulsion over a coat of primer to plastered and other surfaces including providing wall care putty two coats in minimum 1mm thick on plastered surface of walls complete all as specified.
M & L for preparation old decorated plastered or unplastered surfaces of wall cornices etc by brooming down or steel wire brushing, scraping down,the surfaces covered by smoke soot, growth of moulds and moos, efflorescent, having oil and gresase spots and applying one coat of white wash complete all as specified and directed
All as per item No 18 above/here-in-before but on ceiling.
All as per item No 18 above/here-in-before but applying two coats of white wash in walls complete all as specified and directed.
M & L Preparation of Old plastered surfaces and applying one Coats of cement base paint on Walls complete all as specified and as directed.
M & L Preparation of Old plastered surfaces and applying two Coats of cement base paint on Walls complete all as specified and as directed.
M&L for complete removal of existing treatment of wall and applying two coats of 100% premium acrylic emulsion paint having VOC not less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance dirt resistance exterior paint of approved tint/shade (Company depot tinted) with silicon additive @ 1.43 litre/ 10 Sqm over and including applying priming coat of exterior primer @ 0.90 litre/10 Sqm over new/old surfaces of wall complete all as specified.
M&L preparation of plastered surfaces of wall and applying two coats of 100% premium acrylic emulsion paint having VOC not less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance dirt resistance exterior paint of approved tint/shade (Company depot tinted) with silicon additive @ 1.43 litre/ 10 Sqm over and including priming coat exterior primer applied @ 0.90 litre/10 Sqm over new surfaces of wall complete all as specified.
M & L Preparation of Old wooden surface of any description and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified and as directed.
M & L Preparation of Old wooden surface of any description and applying two coats of synthetic enamel paint over 10cm width or girth complete all as specified and as directed.
M & L Preparation of Old steel surface of any description and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
Taking down chowkats or frame, not exceeding 1.5 Sqm in each with shutters (without taking off shutter from the frame) complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed.
Taking down shutters,exc 1 Sqm but not exceeding 2.0 sqm in each and refixing shutter in the same opening including easing & adjusting complete all as specified and directed.
M&L for 35 mm thick 2nd class hard wood factory made glazed/gauzed skeleton shutters for door, open rebated and prepared to receive glass, gauze etc (without sash bars), edges framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc; size of the members of shutters as specified in SSR Part- I, Section 8, clause 8.24(a) complete all as directed.
S&F 30mm thick Flush shutters, solid core construction, with block coard core & plywood face panels commercial type on both side conforming to IS 2202 (Part- I) -1999, including internal liping beading all round fixed as in Door Shutter,Cup board shutter & Kitchen rack all as specified.
S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded, plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet 5mm thick to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, as per specification and drawing and as directed.
S & F 4 mm thick, sheet glass, ordinary quality and glazing with oil putty/timber beads in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
S & F 4 mm thick, sheet glass, figured/ pin headed glass and glazing with oil putty/timber beads in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
S&F for stainless steel wire cloth 0.24mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed
S & F 75 mm size, butt hinges, medium weight, cold rolled mild steel bearing ISI marked complete all as specified and directed.
S & F 100 mm size, butt hinges, stainless steel with cadmium coated screws complete all as specified and directed.
S & F 150 mm long, Aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and directed.
S & F 100 mm long, Aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and directed.
S & F 150 mm size, Aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.
S & F 100 mm size, Aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.
S & F aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm anodised finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.
PRACHANIVA CONSTRUCTIONS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .